diff options
Diffstat (limited to 'include/linux/mmc/protocol.h')
| -rw-r--r-- | include/linux/mmc/protocol.h | 74 |
1 files changed, 71 insertions, 3 deletions
diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h index 08dec8d9e70..2dce60c43f4 100644 --- a/include/linux/mmc/protocol.h +++ b/include/linux/mmc/protocol.h @@ -25,14 +25,16 @@ #ifndef MMC_MMC_PROTOCOL_H #define MMC_MMC_PROTOCOL_H -/* Standard MMC commands (3.1) type argument response */ +/* Standard MMC commands (4.1) type argument response */ /* class 1 */ #define MMC_GO_IDLE_STATE 0 /* bc */ #define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */ #define MMC_ALL_SEND_CID 2 /* bcr R2 */ #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ #define MMC_SET_DSR 4 /* bc [31:16] RCA */ +#define MMC_SWITCH 6 /* ac [31:0] See below R1b */ #define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ +#define MMC_SEND_EXT_CSD 8 /* adtc R1 */ #define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */ #define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */ #define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ @@ -80,6 +82,7 @@ /* class 8 */ /* This is basically the same command as for MMC with some quirks. */ #define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */ +#define SD_SWITCH 6 /* adtc [31:0] See below R1 */ /* Application commands */ #define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ @@ -88,6 +91,30 @@ #define SD_APP_SEND_SCR 51 /* adtc R1 */ /* + * MMC_SWITCH argument format: + * + * [31:26] Always 0 + * [25:24] Access Mode + * [23:16] Location of target Byte in EXT_CSD + * [15:08] Value Byte + * [07:03] Always 0 + * [02:00] Command Set + */ + +/* + * SD_SWITCH argument format: + * + * [31] Check (0) or switch (1) + * [30:24] Reserved (0) + * [23:20] Function group 6 + * [19:16] Function group 5 + * [15:12] Function group 4 + * [11:8] Function group 3 + * [7:4] Function group 2 + * [3:0] Function group 1 + */ + +/* MMC status in R1 Type e : error bit @@ -230,13 +257,54 @@ struct _mmc_csd { #define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */ #define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */ -#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */ +#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */ +#define CSD_STRUCT_EXT_CSD 3 /* Version is coded in CSD_STRUCTURE in EXT_CSD */ #define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */ #define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */ #define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */ -#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */ +#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 - 3.2 - 3.31 */ +#define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 - 4.1 */ + +/* + * EXT_CSD fields + */ + +#define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_HS_TIMING 185 /* R/W */ +#define EXT_CSD_CARD_TYPE 196 /* RO */ + +/* + * EXT_CSD field definitions + */ + +#define EXT_CSD_CMD_SET_NORMAL (1<<0) +#define EXT_CSD_CMD_SET_SECURE (1<<1) +#define EXT_CSD_CMD_SET_CPSECURE (1<<2) + +#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ +#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ + +#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ +#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ +#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ + +/* + * MMC_SWITCH access modes + */ + +#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ +#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */ +#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */ +#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */ + +/* + * SCR field definitions + */ +#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */ +#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */ +#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00 */ /* * SD bus widths |