diff options
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/card.h | 12 | ||||
| -rw-r--r-- | include/linux/mmc/core.h | 1 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 59 | ||||
| -rw-r--r-- | include/linux/mmc/mmc.h | 3 | ||||
| -rw-r--r-- | include/linux/mmc/sdio_func.h | 3 |
5 files changed, 77 insertions, 1 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 403aa505f27..2ee22e8af11 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -40,6 +40,8 @@ struct mmc_csd { }; struct mmc_ext_csd { + u8 rev; + unsigned int sa_timeout; /* Units: 100ns */ unsigned int hs_max_dtr; unsigned int sectors; }; @@ -62,7 +64,8 @@ struct sdio_cccr { low_speed:1, wide_bus:1, high_power:1, - high_speed:1; + high_speed:1, + disable_cd:1; }; struct sdio_cis { @@ -94,6 +97,8 @@ struct mmc_card { #define MMC_STATE_READONLY (1<<1) /* card is read-only */ #define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */ #define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */ + unsigned int quirks; /* card quirks */ +#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ u32 raw_cid[4]; /* raw card CID */ u32 raw_csd[4]; /* raw card CSD */ @@ -129,6 +134,11 @@ struct mmc_card { #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) +static inline int mmc_card_lenient_fn0(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_LENIENT_FN0; +} + #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) (dev_name(&(c)->dev)) diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 7ac8b500d55..e4898e9eeb5 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -139,6 +139,7 @@ extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int); extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort); extern void mmc_release_host(struct mmc_host *host); +extern int mmc_try_claim_host(struct mmc_host *host); /** * mmc_claim_host - exclusively claim a host diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 3e7615e9087..eaf36364b7d 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -11,6 +11,7 @@ #define LINUX_MMC_HOST_H #include <linux/leds.h> +#include <linux/sched.h> #include <linux/mmc/core.h> @@ -51,6 +52,35 @@ struct mmc_ios { }; struct mmc_host_ops { + /* + * Hosts that support power saving can use the 'enable' and 'disable' + * methods to exit and enter power saving states. 'enable' is called + * when the host is claimed and 'disable' is called (or scheduled with + * a delay) when the host is released. The 'disable' is scheduled if + * the disable delay set by 'mmc_set_disable_delay()' is non-zero, + * otherwise 'disable' is called immediately. 'disable' may be + * scheduled repeatedly, to permit ever greater power saving at the + * expense of ever greater latency to re-enable. Rescheduling is + * determined by the return value of the 'disable' method. A positive + * value gives the delay in milliseconds. + * + * In the case where a host function (like set_ios) may be called + * with or without the host claimed, enabling and disabling can be + * done directly and will nest correctly. Call 'mmc_host_enable()' and + * 'mmc_host_lazy_disable()' for this purpose, but note that these + * functions must be paired. + * + * Alternatively, 'mmc_host_enable()' may be paired with + * 'mmc_host_disable()' which calls 'disable' immediately. In this + * case the 'disable' method will be called with 'lazy' set to 0. + * This is mainly useful for error paths. + * + * Because lazy disable may be called from a work queue, the 'disable' + * method must claim the host when 'lazy' != 0, which will work + * correctly because recursion is detected and handled. + */ + int (*enable)(struct mmc_host *host); + int (*disable)(struct mmc_host *host, int lazy); void (*request)(struct mmc_host *host, struct mmc_request *req); /* * Avoid calling these three functions too often or in a "fast path", @@ -118,6 +148,9 @@ struct mmc_host { #define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ #define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ +#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */ +#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ +#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ @@ -142,9 +175,18 @@ struct mmc_host { unsigned int removed:1; /* host is being removed */ #endif + /* Only used with MMC_CAP_DISABLE */ + int enabled; /* host is enabled */ + int nesting_cnt; /* "enable" nesting count */ + int en_dis_recurs; /* detect recursion */ + unsigned int disable_delay; /* disable delay in msecs */ + struct delayed_work disable; /* disabling work */ + struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; + struct task_struct *claimer; /* task that has host claimed */ + int claim_cnt; /* "claim" nesting count */ struct delayed_work detect; @@ -183,6 +225,9 @@ static inline void *mmc_priv(struct mmc_host *host) extern int mmc_suspend_host(struct mmc_host *, pm_message_t); extern int mmc_resume_host(struct mmc_host *); +extern void mmc_power_save_host(struct mmc_host *host); +extern void mmc_power_restore_host(struct mmc_host *host); + extern void mmc_detect_change(struct mmc_host *, unsigned long delay); extern void mmc_request_done(struct mmc_host *, struct mmc_request *); @@ -197,5 +242,19 @@ struct regulator; int mmc_regulator_get_ocrmask(struct regulator *supply); int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit); +int mmc_card_awake(struct mmc_host *host); +int mmc_card_sleep(struct mmc_host *host); +int mmc_card_can_sleep(struct mmc_host *host); + +int mmc_host_enable(struct mmc_host *host); +int mmc_host_disable(struct mmc_host *host); +int mmc_host_lazy_disable(struct mmc_host *host); + +static inline void mmc_set_disable_delay(struct mmc_host *host, + unsigned int disable_delay) +{ + host->disable_delay = disable_delay; +} + #endif diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 14b81f3e523..c02c8db7370 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -31,6 +31,7 @@ #define MMC_ALL_SEND_CID 2 /* bcr R2 */ #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ #define MMC_SET_DSR 4 /* bc [31:16] RCA */ +#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */ #define MMC_SWITCH 6 /* ac [31:0] See below R1b */ #define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ #define MMC_SEND_EXT_CSD 8 /* adtc R1 */ @@ -127,6 +128,7 @@ #define R1_STATUS(x) (x & 0xFFFFE000) #define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ #define R1_READY_FOR_DATA (1 << 8) /* sx, a */ +#define R1_SWITCH_ERROR (1 << 7) /* sx, c */ #define R1_APP_CMD (1 << 5) /* sr, c */ /* @@ -254,6 +256,7 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ +#define EXT_CSD_S_A_TIMEOUT 217 /* * EXT_CSD field definitions diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index 451bdfc8583..ac3ab683fec 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -67,6 +67,7 @@ struct sdio_func { #define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev) #define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d) +#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev) /* * SDIO function device driver @@ -81,6 +82,8 @@ struct sdio_driver { struct device_driver drv; }; +#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv) + /** * SDIO_DEVICE - macro used to describe a specific SDIO device * @vend: the 16 bit manufacturer code |