summaryrefslogtreecommitdiffstats
path: root/include/linux/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mmc')
-rw-r--r--include/linux/mmc/dw_mmc.h217
-rw-r--r--include/linux/mmc/host.h19
-rw-r--r--include/linux/mmc/mmc.h2
-rw-r--r--include/linux/mmc/sdhci.h6
-rw-r--r--include/linux/mmc/sh_mmcif.h60
5 files changed, 291 insertions, 13 deletions
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
new file mode 100644
index 00000000000..16b0261763e
--- /dev/null
+++ b/include/linux/mmc/dw_mmc.h
@@ -0,0 +1,217 @@
+/*
+ * Synopsys DesignWare Multimedia Card Interface driver
+ * (Based on NXP driver for lpc 31xx)
+ *
+ * Copyright (C) 2009 NXP Semiconductors
+ * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MMC_DW_MMC_H_
+#define _LINUX_MMC_DW_MMC_H_
+
+#define MAX_MCI_SLOTS 2
+
+enum dw_mci_state {
+ STATE_IDLE = 0,
+ STATE_SENDING_CMD,
+ STATE_SENDING_DATA,
+ STATE_DATA_BUSY,
+ STATE_SENDING_STOP,
+ STATE_DATA_ERROR,
+};
+
+enum {
+ EVENT_CMD_COMPLETE = 0,
+ EVENT_XFER_COMPLETE,
+ EVENT_DATA_COMPLETE,
+ EVENT_DATA_ERROR,
+ EVENT_XFER_ERROR
+};
+
+struct mmc_data;
+
+/**
+ * struct dw_mci - MMC controller state shared between all slots
+ * @lock: Spinlock protecting the queue and associated data.
+ * @regs: Pointer to MMIO registers.
+ * @sg: Scatterlist entry currently being processed by PIO code, if any.
+ * @pio_offset: Offset into the current scatterlist entry.
+ * @cur_slot: The slot which is currently using the controller.
+ * @mrq: The request currently being processed on @cur_slot,
+ * or NULL if the controller is idle.
+ * @cmd: The command currently being sent to the card, or NULL.
+ * @data: The data currently being transferred, or NULL if no data
+ * transfer is in progress.
+ * @use_dma: Whether DMA channel is initialized or not.
+ * @sg_dma: Bus address of DMA buffer.
+ * @sg_cpu: Virtual address of DMA buffer.
+ * @dma_ops: Pointer to platform-specific DMA callbacks.
+ * @cmd_status: Snapshot of SR taken upon completion of the current
+ * command. Only valid when EVENT_CMD_COMPLETE is pending.
+ * @data_status: Snapshot of SR taken upon completion of the current
+ * data transfer. Only valid when EVENT_DATA_COMPLETE or
+ * EVENT_DATA_ERROR is pending.
+ * @stop_cmdr: Value to be loaded into CMDR when the stop command is
+ * to be sent.
+ * @dir_status: Direction of current transfer.
+ * @tasklet: Tasklet running the request state machine.
+ * @card_tasklet: Tasklet handling card detect.
+ * @pending_events: Bitmask of events flagged by the interrupt handler
+ * to be processed by the tasklet.
+ * @completed_events: Bitmask of events which the state machine has
+ * processed.
+ * @state: Tasklet state.
+ * @queue: List of slots waiting for access to the controller.
+ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
+ * rate and timeout calculations.
+ * @current_speed: Configured rate of the controller.
+ * @num_slots: Number of slots available.
+ * @pdev: Platform device associated with the MMC controller.
+ * @pdata: Platform data associated with the MMC controller.
+ * @slot: Slots sharing this MMC controller.
+ * @data_shift: log2 of FIFO item size.
+ * @push_data: Pointer to FIFO push function.
+ * @pull_data: Pointer to FIFO pull function.
+ * @quirks: Set of quirks that apply to specific versions of the IP.
+ *
+ * Locking
+ * =======
+ *
+ * @lock is a softirq-safe spinlock protecting @queue as well as
+ * @cur_slot, @mrq and @state. These must always be updated
+ * at the same time while holding @lock.
+ *
+ * The @mrq field of struct dw_mci_slot is also protected by @lock,
+ * and must always be written at the same time as the slot is added to
+ * @queue.
+ *
+ * @pending_events and @completed_events are accessed using atomic bit
+ * operations, so they don't need any locking.
+ *
+ * None of the fields touched by the interrupt handler need any
+ * locking. However, ordering is important: Before EVENT_DATA_ERROR or
+ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
+ * interrupts must be disabled and @data_status updated with a
+ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
+ * CMDRDY interupt must be disabled and @cmd_status updated with a
+ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
+ * bytes_xfered field of @data must be written. This is ensured by
+ * using barriers.
+ */
+struct dw_mci {
+ spinlock_t lock;
+ void __iomem *regs;
+
+ struct scatterlist *sg;
+ unsigned int pio_offset;
+
+ struct dw_mci_slot *cur_slot;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ /* DMA interface members*/
+ int use_dma;
+
+ dma_addr_t sg_dma;
+ void *sg_cpu;
+ struct dw_mci_dma_ops *dma_ops;
+#ifdef CONFIG_MMC_DW_IDMAC
+ unsigned int ring_size;
+#else
+ struct dw_mci_dma_data *dma_data;
+#endif
+ u32 cmd_status;
+ u32 data_status;
+ u32 stop_cmdr;
+ u32 dir_status;
+ struct tasklet_struct tasklet;
+ struct tasklet_struct card_tasklet;
+ unsigned long pending_events;
+ unsigned long completed_events;
+ enum dw_mci_state state;
+ struct list_head queue;
+
+ u32 bus_hz;
+ u32 current_speed;
+ u32 num_slots;
+ struct platform_device *pdev;
+ struct dw_mci_board *pdata;
+ struct dw_mci_slot *slot[MAX_MCI_SLOTS];
+
+ /* FIFO push and pull */
+ int data_shift;
+ void (*push_data)(struct dw_mci *host, void *buf, int cnt);
+ void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
+
+ /* Workaround flags */
+ u32 quirks;
+};
+
+/* DMA ops for Internal/External DMAC interface */
+struct dw_mci_dma_ops {
+ /* DMA Ops */
+ int (*init)(struct dw_mci *host);
+ void (*start)(struct dw_mci *host, unsigned int sg_len);
+ void (*complete)(struct dw_mci *host);
+ void (*stop)(struct dw_mci *host);
+ void (*cleanup)(struct dw_mci *host);
+ void (*exit)(struct dw_mci *host);
+};
+
+/* IP Quirks/flags. */
+/* No special quirks or flags to cater for */
+#define DW_MCI_QUIRK_NONE 0
+/* DTO fix for command transmission with IDMAC configured */
+#define DW_MCI_QUIRK_IDMAC_DTO 1
+/* delay needed between retries on some 2.11a implementations */
+#define DW_MCI_QUIRK_RETRY_DELAY 2
+/* High Speed Capable - Supports HS cards (upto 50MHz) */
+#define DW_MCI_QUIRK_HIGHSPEED 4
+
+
+struct dma_pdata;
+
+struct block_settings {
+ unsigned short max_segs; /* see blk_queue_max_segments */
+ unsigned int max_blk_size; /* maximum size of one mmc block */
+ unsigned int max_blk_count; /* maximum number of blocks in one req*/
+ unsigned int max_req_size; /* maximum number of bytes in one req*/
+ unsigned int max_seg_size; /* see blk_queue_max_segment_size */
+};
+
+/* Board platform data */
+struct dw_mci_board {
+ u32 num_slots;
+
+ u32 quirks; /* Workaround / Quirk flags */
+ unsigned int bus_hz; /* Bus speed */
+
+ /* delay in mS before detecting cards after interrupt */
+ u32 detect_delay_ms;
+
+ int (*init)(u32 slot_id, irq_handler_t , void *);
+ int (*get_ro)(u32 slot_id);
+ int (*get_cd)(u32 slot_id);
+ int (*get_ocr)(u32 slot_id);
+ int (*get_bus_wd)(u32 slot_id);
+ /*
+ * Enable power to selected slot and set voltage to desired level.
+ * Voltage levels are specified using MMC_VDD_xxx defines defined
+ * in linux/mmc/host.h file.
+ */
+ void (*setpower)(u32 slot_id, u32 volt);
+ void (*exit)(u32 slot_id);
+ void (*select_slot)(u32 slot_id);
+
+ struct dw_mci_dma_ops *dma_ops;
+ struct dma_pdata *data;
+ struct block_settings *blk_settings;
+};
+
+#endif /* _LINUX_MMC_DW_MMC_H_ */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 30f6fad99a5..bcb793ec737 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -131,6 +131,9 @@ struct mmc_host {
unsigned int f_max;
unsigned int f_init;
u32 ocr_avail;
+ u32 ocr_avail_sdio; /* SDIO-specific OCR */
+ u32 ocr_avail_sd; /* SD-specific OCR */
+ u32 ocr_avail_mmc; /* MMC-specific OCR */
struct notifier_block pm_notify;
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
@@ -169,9 +172,20 @@ struct mmc_host {
#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */
/* DDR mode at 1.2V */
#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */
+#define MMC_CAP_BUS_WIDTH_TEST (1 << 14) /* CMD14/CMD19 bus width ok */
mmc_pm_flag_t pm_caps; /* supported pm features */
+#ifdef CONFIG_MMC_CLKGATE
+ int clk_requests; /* internal reference counter */
+ unsigned int clk_delay; /* number of MCI clk hold cycles */
+ bool clk_gated; /* clock gated */
+ struct work_struct clk_gate_work; /* delayed clock gate */
+ unsigned int clk_old; /* old clock value cache */
+ spinlock_t clk_lock; /* lock for clk fields */
+ struct mutex clk_gate_mutex; /* mutex for clock gating */
+#endif
+
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
unsigned short max_segs; /* see blk_queue_max_segments */
@@ -307,5 +321,10 @@ static inline int mmc_card_is_removable(struct mmc_host *host)
return !(host->caps & MMC_CAP_NONREMOVABLE) && mmc_assume_removable;
}
+static inline int mmc_card_is_powered_resumed(struct mmc_host *host)
+{
+ return host->pm_flags & MMC_PM_KEEP_POWER;
+}
+
#endif
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 956fbd87769..612301f85d1 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -40,7 +40,9 @@
#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
+#define MMC_BUS_TEST_R 14 /* adtc R1 */
#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
+#define MMC_BUS_TEST_W 19 /* adtc R1 */
#define MMC_SPI_READ_OCR 58 /* spi spi_R3 */
#define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 1fdc673f239..83bd9f76709 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -83,6 +83,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
+/* Controller treats ADMA descriptors with length 0000h incorrectly */
+#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
@@ -139,6 +141,10 @@ struct sdhci_host {
unsigned int caps; /* Alternative capabilities */
+ unsigned int ocr_avail_sdio; /* OCR bit masks */
+ unsigned int ocr_avail_sd;
+ unsigned int ocr_avail_mmc;
+
unsigned long private[0] ____cacheline_aligned;
};
#endif /* __SDHCI_H */
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index 5c99da1078a..44fc5348fd5 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -14,8 +14,9 @@
#ifndef __SH_MMCIF_H__
#define __SH_MMCIF_H__
-#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/sh_dma.h>
/*
* MMCIF : CE_CLK_CTRL [19:16]
@@ -31,13 +32,19 @@
* 1111 : Peripheral clock (sup_pclk set '1')
*/
+struct sh_mmcif_dma {
+ struct sh_dmae_slave chan_priv_tx;
+ struct sh_dmae_slave chan_priv_rx;
+};
+
struct sh_mmcif_plat_data {
void (*set_pwr)(struct platform_device *pdev, int state);
void (*down_pwr)(struct platform_device *pdev);
int (*get_cd)(struct platform_device *pdef);
- u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */
- unsigned long caps;
- u32 ocr;
+ struct sh_mmcif_dma *dma;
+ u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */
+ unsigned long caps;
+ u32 ocr;
};
#define MMCIF_CE_CMD_SET 0x00000000
@@ -59,6 +66,32 @@ struct sh_mmcif_plat_data {
#define MMCIF_CE_HOST_STS2 0x0000004C
#define MMCIF_CE_VERSION 0x0000007C
+/* CE_BUF_ACC */
+#define BUF_ACC_DMAWEN (1 << 25)
+#define BUF_ACC_DMAREN (1 << 24)
+#define BUF_ACC_BUSW_32 (0 << 17)
+#define BUF_ACC_BUSW_16 (1 << 17)
+#define BUF_ACC_ATYP (1 << 16)
+
+/* CE_CLK_CTRL */
+#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */
+#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
+#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
+#define CLKDIV_4 (1<<16) /* mmc clock frequency.
+ * n: bus clock/(2^(n+1)) */
+#define CLKDIV_256 (7<<16) /* mmc clock frequency. (see above) */
+#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */
+#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \
+ (1 << 9) | (1 << 8)) /* resp busy timeout */
+#define SRWDTO_29 ((1 << 7) | (1 << 6) | \
+ (1 << 5) | (1 << 4)) /* read/write timeout */
+#define SCCSTO_29 ((1 << 3) | (1 << 2) | \
+ (1 << 1) | (1 << 0)) /* ccs timeout */
+
+/* CE_VERSION */
+#define SOFT_RST_ON (1 << 31)
+#define SOFT_RST_OFF 0
+
static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
{
return readl(addr + reg);
@@ -145,21 +178,20 @@ static inline int sh_mmcif_boot_do_read(void __iomem *base,
static inline void sh_mmcif_boot_init(void __iomem *base)
{
- unsigned long tmp;
-
/* reset */
- tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION);
- sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000);
- sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000);
+ sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON);
+ sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF);
/* byte swap */
- sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000);
+ sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
/* Set block size in MMCIF hardware */
sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
- /* Enable the clock, set it to Bus clock/256 (about 325Khz)*/
- sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff);
+ /* Enable the clock, set it to Bus clock/256 (about 325Khz). */
+ sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+ CLK_ENABLE | CLKDIV_256 | SRSPTO_256 |
+ SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
/* CMD0 */
sh_mmcif_boot_cmd(base, 0x00000040, 0);
@@ -184,7 +216,9 @@ static inline void sh_mmcif_boot_slurp(void __iomem *base,
unsigned long tmp;
/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
- sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff);
+ sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+ CLK_ENABLE | CLKDIV_4 | SRSPTO_256 |
+ SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
/* CMD9 - Get CSD */
sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 16:06:08 +0000