diff options
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/core.h | 2 | ||||
| -rw-r--r-- | include/linux/mmc/mmc.h (renamed from include/linux/mmc/protocol.h) | 54 | ||||
| -rw-r--r-- | include/linux/mmc/sd.h | 83 |
3 files changed, 86 insertions, 53 deletions
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index d8fd66cf28b..04bbe12fae8 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -101,7 +101,7 @@ struct mmc_card; extern int mmc_wait_for_req(struct mmc_host *, struct mmc_request *); extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int); -extern int mmc_wait_for_app_cmd(struct mmc_host *, unsigned int, +extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *, struct mmc_command *, int); extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int); diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/mmc.h index 3ca91a6fc23..e3ed9b95040 100644 --- a/include/linux/mmc/protocol.h +++ b/include/linux/mmc/mmc.h @@ -22,8 +22,8 @@ * 15 May 2002 */ -#ifndef MMC_MMC_PROTOCOL_H -#define MMC_MMC_PROTOCOL_H +#ifndef MMC_MMC_H +#define MMC_MMC_H /* Standard MMC commands (4.1) type argument response */ /* class 1 */ @@ -78,21 +78,6 @@ #define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */ #define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */ -/* SD commands type argument response */ - /* class 0 */ -/* This is basically the same command as for MMC with some quirks. */ -#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */ -#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */ - - /* class 10 */ -#define SD_SWITCH 6 /* adtc [31:0] See below R1 */ - - /* Application commands */ -#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ -#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */ -#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */ -#define SD_APP_SEND_SCR 51 /* adtc R1 */ - /* * MMC_SWITCH argument format: * @@ -105,27 +90,6 @@ */ /* - * SD_SWITCH argument format: - * - * [31] Check (0) or switch (1) - * [30:24] Reserved (0) - * [23:20] Function group 6 - * [19:16] Function group 5 - * [15:12] Function group 4 - * [11:8] Function group 3 - * [7:4] Function group 2 - * [3:0] Function group 1 - */ - -/* - * SD_SEND_IF_COND argument format: - * - * [31:12] Reserved (0) - * [11:8] Host Voltage Supply Flags - * [7:0] Check Pattern (0xAA) - */ - -/* MMC status in R1 Type e : error bit @@ -289,19 +253,5 @@ struct _mmc_csd { #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */ #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */ -/* - * SCR field definitions - */ - -#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */ -#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */ -#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00 */ - -/* - * SD bus widths - */ -#define SD_BUS_WIDTH_1 0 -#define SD_BUS_WIDTH_4 2 - #endif /* MMC_MMC_PROTOCOL_H */ diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h new file mode 100644 index 00000000000..f310062cffb --- /dev/null +++ b/include/linux/mmc/sd.h @@ -0,0 +1,83 @@ +/* + * include/linux/mmc/sd.h + * + * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#ifndef MMC_SD_H +#define MMC_SD_H + +/* SD commands type argument response */ + /* class 0 */ +/* This is basically the same command as for MMC with some quirks. */ +#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */ +#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */ + + /* class 10 */ +#define SD_SWITCH 6 /* adtc [31:0] See below R1 */ + + /* Application commands */ +#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ +#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */ +#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */ +#define SD_APP_SEND_SCR 51 /* adtc R1 */ + +/* + * SD_SWITCH argument format: + * + * [31] Check (0) or switch (1) + * [30:24] Reserved (0) + * [23:20] Function group 6 + * [19:16] Function group 5 + * [15:12] Function group 4 + * [11:8] Function group 3 + * [7:4] Function group 2 + * [3:0] Function group 1 + */ + +/* + * SD_SEND_IF_COND argument format: + * + * [31:12] Reserved (0) + * [11:8] Host Voltage Supply Flags + * [7:0] Check Pattern (0xAA) + */ + +/* + * SCR field definitions + */ + +#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */ +#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */ +#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00 */ + +/* + * SD bus widths + */ +#define SD_BUS_WIDTH_1 0 +#define SD_BUS_WIDTH_4 2 + +/* + * SD_SWITCH mode + */ +#define SD_SWITCH_CHECK 0 +#define SD_SWITCH_SET 1 + +/* + * SD_SWITCH function groups + */ +#define SD_SWITCH_GRP_ACCESS 0 + +/* + * SD_SWITCH access modes + */ +#define SD_SWITCH_ACCESS_DEF 0 +#define SD_SWITCH_ACCESS_HS 1 + +#endif + |