diff options
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/card.h | 1 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 14 | ||||
| -rw-r--r-- | include/linux/mmc/mmc.h | 7 |
3 files changed, 21 insertions, 1 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 17607369287..d424b9de3af 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -110,6 +110,7 @@ struct mmc_ext_csd { u8 raw_pwr_cl_200_360; /* 237 */ u8 raw_pwr_cl_ddr_52_195; /* 238 */ u8 raw_pwr_cl_ddr_52_360; /* 239 */ + u8 raw_pwr_cl_ddr_200_360; /* 253 */ u8 raw_bkops_status; /* 246 */ u8 raw_sectors[4]; /* 212 - 4 bytes */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 6b1e9ee6ca1..18308737421 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -61,6 +61,7 @@ struct mmc_ios { #define MMC_TIMING_UHS_DDR50 7 #define MMC_TIMING_MMC_DDR52 8 #define MMC_TIMING_MMC_HS200 9 +#define MMC_TIMING_MMC_HS400 10 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -132,6 +133,9 @@ struct mmc_host_ops { /* The tuning command opcode value is different for SD and eMMC cards */ int (*execute_tuning)(struct mmc_host *host, u32 opcode); + + /* Prepare HS400 target operating frequency depending host driver */ + int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); void (*hw_reset)(struct mmc_host *host); void (*card_event)(struct mmc_host *host); @@ -274,6 +278,10 @@ struct mmc_host { #define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ MMC_CAP2_PACKED_WR) #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ +#define MMC_CAP2_HS400_1_8V (1 << 15) /* Can support HS400 1.8V */ +#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */ +#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \ + MMC_CAP2_HS400_1_2V) mmc_pm_flag_t pm_caps; /* supported pm features */ @@ -495,4 +503,10 @@ static inline bool mmc_card_ddr52(struct mmc_card *card) { return card->host->ios.timing == MMC_TIMING_MMC_DDR52; } + +static inline bool mmc_card_hs400(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_HS400; +} + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index f429f13be43..64ec963ed34 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -325,6 +325,7 @@ struct _mmc_csd { #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */ #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */ @@ -354,7 +355,6 @@ struct _mmc_csd { #define EXT_CSD_CMD_SET_SECURE (1<<1) #define EXT_CSD_CMD_SET_CPSECURE (1<<2) -#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */ #define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */ #define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \ @@ -370,6 +370,10 @@ struct _mmc_csd { /* SDR mode @1.2V I/O */ #define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ EXT_CSD_CARD_TYPE_HS200_1_2V) +#define EXT_CSD_CARD_TYPE_HS400_1_8V (1<<6) /* Card can run at 200MHz DDR, 1.8V */ +#define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */ +#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \ + EXT_CSD_CARD_TYPE_HS400_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ @@ -380,6 +384,7 @@ struct _mmc_csd { #define EXT_CSD_TIMING_BC 0 /* Backwards compatility */ #define EXT_CSD_TIMING_HS 1 /* High speed */ #define EXT_CSD_TIMING_HS200 2 /* HS200 */ +#define EXT_CSD_TIMING_HS400 3 /* HS400 */ #define EXT_CSD_SEC_ER_EN BIT(0) #define EXT_CSD_SEC_BD_BLK_EN BIT(2) |