summaryrefslogtreecommitdiffstats
path: root/include/linux/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mmc')
-rw-r--r--include/linux/mmc/card.h29
-rw-r--r--include/linux/mmc/dw_mmc.h14
-rw-r--r--include/linux/mmc/host.h59
-rw-r--r--include/linux/mmc/mmc.h23
-rw-r--r--include/linux/mmc/sdhci.h15
5 files changed, 83 insertions, 57 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index b73027298b3..d424b9de3af 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -63,12 +63,12 @@ struct mmc_ext_csd {
unsigned int power_off_longtime; /* Units: ms */
u8 power_off_notification; /* state */
unsigned int hs_max_dtr;
+ unsigned int hs200_max_dtr;
#define MMC_HIGH_26_MAX_DTR 26000000
#define MMC_HIGH_52_MAX_DTR 52000000
#define MMC_HIGH_DDR_MAX_DTR 52000000
#define MMC_HS200_MAX_DTR 200000000
unsigned int sectors;
- unsigned int card_type;
unsigned int hc_erase_size; /* In sectors */
unsigned int hc_erase_timeout; /* In milliseconds */
unsigned int sec_trim_mult; /* Secure trim multiplier */
@@ -110,6 +110,7 @@ struct mmc_ext_csd {
u8 raw_pwr_cl_200_360; /* 237 */
u8 raw_pwr_cl_ddr_52_195; /* 238 */
u8 raw_pwr_cl_ddr_52_360; /* 239 */
+ u8 raw_pwr_cl_ddr_200_360; /* 253 */
u8 raw_bkops_status; /* 246 */
u8 raw_sectors[4]; /* 212 - 4 bytes */
@@ -194,6 +195,7 @@ struct sdio_cis {
};
struct mmc_host;
+struct mmc_ios;
struct sdio_func;
struct sdio_func_tuple;
@@ -250,15 +252,11 @@ struct mmc_card {
unsigned int state; /* (our) card state */
#define MMC_STATE_PRESENT (1<<0) /* present in sysfs */
#define MMC_STATE_READONLY (1<<1) /* card is read-only */
-#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
-#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
-#define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */
-#define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */
-#define MMC_CARD_SDXC (1<<6) /* card is SDXC */
-#define MMC_CARD_REMOVED (1<<7) /* card has been removed */
-#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
-#define MMC_STATE_DOING_BKOPS (1<<10) /* card is doing BKOPS */
-#define MMC_STATE_SUSPENDED (1<<11) /* card is suspended */
+#define MMC_STATE_BLOCKADDR (1<<2) /* card uses block-addressing */
+#define MMC_CARD_SDXC (1<<3) /* card is SDXC */
+#define MMC_CARD_REMOVED (1<<4) /* card has been removed */
+#define MMC_STATE_DOING_BKOPS (1<<5) /* card is doing BKOPS */
+#define MMC_STATE_SUSPENDED (1<<6) /* card is suspended */
unsigned int quirks; /* card quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
@@ -301,6 +299,7 @@ struct mmc_card {
struct sdio_func_tuple *tuples; /* unknown common tuples */
unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */
+ unsigned int mmc_avail_type; /* supported device type by both host and card */
struct dentry *debugfs_root;
struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
@@ -353,7 +352,7 @@ struct mmc_fixup {
#define CID_OEMID_ANY ((unsigned short) -1)
#define CID_NAME_ANY (NULL)
-#define END_FIXUP { 0 }
+#define END_FIXUP { NULL }
#define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end, \
_cis_vendor, _cis_device, \
@@ -418,11 +417,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
#define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
-#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
-#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200)
#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
-#define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR)
-#define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED))
#define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS)
@@ -430,11 +425,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
-#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
-#define mmc_card_set_hs200(c) ((c)->state |= MMC_STATE_HIGHSPEED_200)
#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
-#define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
-#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
#define mmc_card_set_doing_bkops(c) ((c)->state |= MMC_STATE_DOING_BKOPS)
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 6ce7d2cd3c7..babaea93bca 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -248,20 +248,6 @@ struct dw_mci_board {
/* delay in mS before detecting cards after interrupt */
u32 detect_delay_ms;
- int (*init)(u32 slot_id, irq_handler_t , void *);
- int (*get_ro)(u32 slot_id);
- int (*get_cd)(u32 slot_id);
- int (*get_ocr)(u32 slot_id);
- int (*get_bus_wd)(u32 slot_id);
- /*
- * Enable power to selected slot and set voltage to desired level.
- * Voltage levels are specified using MMC_VDD_xxx defines defined
- * in linux/mmc/host.h file.
- */
- void (*setpower)(u32 slot_id, u32 volt);
- void (*exit)(u32 slot_id);
- void (*select_slot)(u32 slot_id);
-
struct dw_mci_dma_ops *dma_ops;
struct dma_pdata *data;
struct block_settings *blk_settings;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index cb61ea4d694..7960424d0bc 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -17,6 +17,7 @@
#include <linux/fault-inject.h>
#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
#include <linux/mmc/pm.h>
struct mmc_ios {
@@ -58,13 +59,9 @@ struct mmc_ios {
#define MMC_TIMING_UHS_SDR50 5
#define MMC_TIMING_UHS_SDR104 6
#define MMC_TIMING_UHS_DDR50 7
-#define MMC_TIMING_MMC_HS200 8
-
-#define MMC_SDR_MODE 0
-#define MMC_1_2V_DDR_MODE 1
-#define MMC_1_8V_DDR_MODE 2
-#define MMC_1_2V_SDR_MODE 3
-#define MMC_1_8V_SDR_MODE 4
+#define MMC_TIMING_MMC_DDR52 8
+#define MMC_TIMING_MMC_HS200 9
+#define MMC_TIMING_MMC_HS400 10
unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */
@@ -136,6 +133,9 @@ struct mmc_host_ops {
/* The tuning command opcode value is different for SD and eMMC cards */
int (*execute_tuning)(struct mmc_host *host, u32 opcode);
+
+ /* Prepare HS400 target operating frequency depending host driver */
+ int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios);
int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
void (*hw_reset)(struct mmc_host *host);
void (*card_event)(struct mmc_host *host);
@@ -278,6 +278,11 @@ struct mmc_host {
#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \
MMC_CAP2_PACKED_WR)
#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */
+#define MMC_CAP2_HS400_1_8V (1 << 15) /* Can support HS400 1.8V */
+#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */
+#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \
+ MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
mmc_pm_flag_t pm_caps; /* supported pm features */
@@ -318,6 +323,8 @@ struct mmc_host {
int rescan_disable; /* disable card detection */
int rescan_entered; /* used with nonremovable devices */
+ bool trigger_card_event; /* card_event necessary */
+
struct mmc_card *card; /* device attached to this host */
wait_queue_head_t wq;
@@ -391,12 +398,13 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host)
wake_up_process(host->sdio_irq_thread);
}
+void sdio_run_irqs(struct mmc_host *host);
+
#ifdef CONFIG_REGULATOR
int mmc_regulator_get_ocrmask(struct regulator *supply);
int mmc_regulator_set_ocr(struct mmc_host *mmc,
struct regulator *supply,
unsigned short vdd_bit);
-int mmc_regulator_get_supply(struct mmc_host *mmc);
#else
static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
{
@@ -409,13 +417,10 @@ static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
{
return 0;
}
-
-static inline int mmc_regulator_get_supply(struct mmc_host *mmc)
-{
- return 0;
-}
#endif
+int mmc_regulator_get_supply(struct mmc_host *mmc);
+
int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
static inline int mmc_card_is_removable(struct mmc_host *host)
@@ -475,4 +480,32 @@ static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
return host->ios.clock;
}
#endif
+
+static inline int mmc_card_hs(struct mmc_card *card)
+{
+ return card->host->ios.timing == MMC_TIMING_SD_HS ||
+ card->host->ios.timing == MMC_TIMING_MMC_HS;
+}
+
+static inline int mmc_card_uhs(struct mmc_card *card)
+{
+ return card->host->ios.timing >= MMC_TIMING_UHS_SDR12 &&
+ card->host->ios.timing <= MMC_TIMING_UHS_DDR50;
+}
+
+static inline bool mmc_card_hs200(struct mmc_card *card)
+{
+ return card->host->ios.timing == MMC_TIMING_MMC_HS200;
+}
+
+static inline bool mmc_card_ddr52(struct mmc_card *card)
+{
+ return card->host->ios.timing == MMC_TIMING_MMC_DDR52;
+}
+
+static inline bool mmc_card_hs400(struct mmc_card *card)
+{
+ return card->host->ios.timing == MMC_TIMING_MMC_HS400;
+}
+
#endif /* LINUX_MMC_HOST_H */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 50bcde3677c..64ec963ed34 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -325,6 +325,7 @@ struct _mmc_csd {
#define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */
#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
+#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */
#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
#define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */
@@ -354,18 +355,25 @@ struct _mmc_csd {
#define EXT_CSD_CMD_SET_SECURE (1<<1)
#define EXT_CSD_CMD_SET_CPSECURE (1<<2)
-#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
-#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
-#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */
+#define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \
+ EXT_CSD_CARD_TYPE_HS_52)
#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
/* DDR mode @1.8V or 3V I/O */
#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
/* DDR mode @1.2V I/O */
#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
| EXT_CSD_CARD_TYPE_DDR_1_2V)
-#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */
-#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */
/* SDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \
+ EXT_CSD_CARD_TYPE_HS200_1_2V)
+#define EXT_CSD_CARD_TYPE_HS400_1_8V (1<<6) /* Card can run at 200MHz DDR, 1.8V */
+#define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */
+#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \
+ EXT_CSD_CARD_TYPE_HS400_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
@@ -373,6 +381,11 @@ struct _mmc_csd {
#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
+#define EXT_CSD_TIMING_BC 0 /* Backwards compatility */
+#define EXT_CSD_TIMING_HS 1 /* High speed */
+#define EXT_CSD_TIMING_HS200 2 /* HS200 */
+#define EXT_CSD_TIMING_HS400 3 /* HS400 */
+
#define EXT_CSD_SEC_ER_EN BIT(0)
#define EXT_CSD_SEC_BD_BLK_EN BIT(2)
#define EXT_CSD_SEC_GB_CL_EN BIT(4)
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 7be12b88348..08abe994188 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -57,12 +57,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
/* Controller reports inverted write-protect state */
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
-/* Controller has nonstandard clock management */
-#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
/* Controller does not like fast PIO transfers */
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
-/* Controller losing signal/interrupt enable states after reset */
-#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
/* Controller has to be forced to use block size of 2048 bytes */
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
/* Controller cannot do multi-block transfers */
@@ -147,6 +143,7 @@ struct sdhci_host {
bool runtime_suspended; /* Host is runtime suspended */
bool bus_on; /* Bus power prevents runtime suspend */
+ bool preset_enabled; /* Preset is enabled */
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
@@ -164,8 +161,7 @@ struct sdhci_host {
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
dma_addr_t align_addr; /* Mapped bounce buffer */
- struct tasklet_struct card_tasklet; /* Tasklet structures */
- struct tasklet_struct finish_tasklet;
+ struct tasklet_struct finish_tasklet; /* Tasklet structures */
struct timer_list timer; /* Timer for timeouts */
@@ -177,6 +173,13 @@ struct sdhci_host {
unsigned int ocr_avail_mmc;
u32 ocr_mask; /* available voltages */
+ unsigned timing; /* Current timing */
+
+ u32 thread_isr;
+
+ /* cached registers */
+ u32 ier;
+
wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-28 07:04:08 +0000