diff options
Diffstat (limited to 'include/linux/mtd/iflash.h')
-rw-r--r-- | include/linux/mtd/iflash.h | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/include/linux/mtd/iflash.h b/include/linux/mtd/iflash.h new file mode 100644 index 00000000000..9aa5b4f0266 --- /dev/null +++ b/include/linux/mtd/iflash.h @@ -0,0 +1,98 @@ +/* $Id: iflash.h,v 1.2 2000/11/13 18:01:54 dwmw2 Exp $ */ + +#ifndef __MTD_IFLASH_H__ +#define __MTD_IFLASH_H__ + +/* Extended CIS registers for Series 2 and 2+ cards */ +/* The registers are all offsets from 0x4000 */ +#define CISREG_CSR 0x0100 +#define CISREG_WP 0x0104 +#define CISREG_RDYBSY 0x0140 + +/* Extended CIS registers for Series 2 cards */ +#define CISREG_SLEEP 0x0118 +#define CISREG_RDY_MASK 0x0120 +#define CISREG_RDY_STATUS 0x0130 + +/* Extended CIS registers for Series 2+ cards */ +#define CISREG_VCR 0x010c + +/* Card Status Register */ +#define CSR_SRESET 0x20 /* Soft reset */ +#define CSR_CMWP 0x10 /* Common memory write protect */ +#define CSR_PWRDOWN 0x08 /* Power down status */ +#define CSR_CISWP 0x04 /* Common memory CIS WP */ +#define CSR_WP 0x02 /* Mechanical write protect */ +#define CSR_READY 0x01 /* Ready/busy status */ + +/* Write Protection Register */ +#define WP_BLKEN 0x04 /* Enable block locking */ +#define WP_CMWP 0x02 /* Common memory write protect */ +#define WP_CISWP 0x01 /* Common memory CIS WP */ + +/* Voltage Control Register */ +#define VCR_VCC_LEVEL 0x80 /* 0 = 5V, 1 = 3.3V */ +#define VCR_VPP_VALID 0x02 /* Vpp Valid */ +#define VCR_VPP_GEN 0x01 /* Integrated Vpp generator */ + +/* Ready/Busy Mode Register */ +#define RDYBSY_RACK 0x02 /* Ready acknowledge */ +#define RDYBSY_MODE 0x01 /* 1 = high performance */ + +#define LOW(x) ((x) & 0xff) + +/* 28F008SA-Compatible Command Set */ +#define IF_READ_ARRAY 0xffff +#define IF_INTEL_ID 0x9090 +#define IF_READ_CSR 0x7070 +#define IF_CLEAR_CSR 0x5050 +#define IF_WRITE 0x4040 +#define IF_BLOCK_ERASE 0x2020 +#define IF_ERASE_SUSPEND 0xb0b0 +#define IF_CONFIRM 0xd0d0 + +/* 28F016SA Performance Enhancement Commands */ +#define IF_READ_PAGE 0x7575 +#define IF_PAGE_SWAP 0x7272 +#define IF_SINGLE_LOAD 0x7474 +#define IF_SEQ_LOAD 0xe0e0 +#define IF_PAGE_WRITE 0x0c0c +#define IF_RDY_MODE 0x9696 +#define IF_RDY_LEVEL 0x0101 +#define IF_RDY_PULSE_WRITE 0x0202 +#define IF_RDY_PULSE_ERASE 0x0303 +#define IF_RDY_DISABLE 0x0404 +#define IF_LOCK_BLOCK 0x7777 +#define IF_UPLOAD_STATUS 0x9797 +#define IF_READ_ESR 0x7171 +#define IF_ERASE_UNLOCKED 0xa7a7 +#define IF_SLEEP 0xf0f0 +#define IF_ABORT 0x8080 +#define IF_UPLOAD_DEVINFO 0x9999 + +/* Definitions for Compatible Status Register */ +#define CSR_WR_READY 0x8080 /* Write state machine status */ +#define CSR_ERA_SUSPEND 0x4040 /* Erase suspend status */ +#define CSR_ERA_ERR 0x2020 /* Erase status */ +#define CSR_WR_ERR 0x1010 /* Data write status */ +#define CSR_VPP_LOW 0x0808 /* Vpp status */ + +/* Definitions for Global Status Register */ +#define GSR_WR_READY 0x8080 /* Write state machine status */ +#define GSR_OP_SUSPEND 0x4040 /* Operation suspend status */ +#define GSR_OP_ERR 0x2020 /* Device operation status */ +#define GSR_SLEEP 0x1010 /* Device sleep status */ +#define GSR_QUEUE_FULL 0x0808 /* Queue status */ +#define GSR_PAGE_AVAIL 0x0404 /* Page buffer available status */ +#define GSR_PAGE_READY 0x0202 /* Page buffer status */ +#define GSR_PAGE_SELECT 0x0101 /* Page buffer select status */ + +/* Definitions for Block Status Register */ +#define BSR_READY 0x8080 /* Block status */ +#define BSR_UNLOCK 0x4040 /* Block lock status */ +#define BSR_FAILED 0x2020 /* Block operation status */ +#define BSR_ABORTED 0x1010 /* Operation abort status */ +#define BSR_QUEUE_FULL 0x0808 /* Queue status */ +#define BSR_VPP_LOW 0x0404 /* Vpp status */ + +#endif /* __MTD_IFLASH_H__ */ |