diff options
Diffstat (limited to 'include/linux/mtd/nand.h')
| -rw-r--r-- | include/linux/mtd/nand.h | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index c300db3ae28..e4d451e4600 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -587,6 +587,11 @@ struct nand_buffers { * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, * also from the datasheet. It is the recommended ECC step * size, if known; if unknown, set to zero. + * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is + * either deduced from the datasheet if the NAND + * chip is not ONFI compliant or set to 0 if it is + * (an ONFI chip is always configured in mode 0 + * after a NAND reset) * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 @@ -671,6 +676,7 @@ struct nand_chip { uint8_t bits_per_cell; uint16_t ecc_strength_ds; uint16_t ecc_step_ds; + int onfi_timing_mode_default; int badblockpos; int badblockbits; @@ -766,12 +772,17 @@ struct nand_chip { * @options: stores various chip bit options * @id_len: The valid length of the @id. * @oobsize: OOB size + * @ecc: ECC correctability and step information from the datasheet. * @ecc.strength_ds: The ECC correctability from the datasheet, same as the * @ecc_strength_ds in nand_chip{}. * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the * @ecc_step_ds in nand_chip{}, also from the datasheet. * For example, the "4bit ECC for each 512Byte" can be set with * NAND_ECC_INFO(4, 512). + * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND + * reset. Should be deduced from timings described + * in the datasheet. + * */ struct nand_flash_dev { char *name; @@ -792,6 +803,7 @@ struct nand_flash_dev { uint16_t strength_ds; uint16_t step_ds; } ecc; + int onfi_timing_mode_default; }; /** |