diff options
Diffstat (limited to 'include/linux/mtd')
| -rw-r--r-- | include/linux/mtd/blktrans.h | 15 | ||||
| -rw-r--r-- | include/linux/mtd/cfi.h | 14 | ||||
| -rw-r--r-- | include/linux/mtd/mtd.h | 8 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 21 |
4 files changed, 41 insertions, 17 deletions
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index 8b4aa0523db..b481ccd7ff3 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -9,6 +9,8 @@ #define __MTD_TRANS_H__ #include <linux/mutex.h> +#include <linux/kref.h> +#include <linux/sysfs.h> struct hd_geometry; struct mtd_info; @@ -24,11 +26,16 @@ struct mtd_blktrans_dev { int devnum; unsigned long size; int readonly; - void *blkcore_priv; /* gendisk in 2.5, devfs_handle in 2.4 */ + int open; + struct kref ref; + struct gendisk *disk; + struct attribute_group *disk_attributes; + struct task_struct *thread; + struct request_queue *rq; + spinlock_t queue_lock; + void *priv; }; -struct blkcore_priv; /* Differs for 2.4 and 2.5 kernels; private */ - struct mtd_blktrans_ops { char *name; int major; @@ -60,8 +67,6 @@ struct mtd_blktrans_ops { struct list_head devs; struct list_head list; struct module *owner; - - struct mtd_blkcore_priv *blkcore_priv; }; extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr); diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index df89f427523..cee05b1e62b 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -297,7 +297,7 @@ static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, * and 32bit devices on 16 bit busses * set the low bit of the alternating bit sequence of the address. */ - if (((type * interleave) > bankwidth) && ((uint8_t)cmd_ofs == 0xaa)) + if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa)) addr |= (type >> 1)*interleave; return addr; @@ -518,11 +518,13 @@ struct cfi_fixup { #define CFI_MFR_ANY 0xffff #define CFI_ID_ANY 0xffff -#define CFI_MFR_AMD 0x0001 -#define CFI_MFR_INTEL 0x0089 -#define CFI_MFR_ATMEL 0x001F -#define CFI_MFR_SAMSUNG 0x00EC -#define CFI_MFR_ST 0x0020 /* STMicroelectronics */ +#define CFI_MFR_AMD 0x0001 +#define CFI_MFR_ATMEL 0x001F +#define CFI_MFR_INTEL 0x0089 +#define CFI_MFR_MACRONIX 0x00C2 +#define CFI_MFR_SAMSUNG 0x00EC +#define CFI_MFR_SST 0x00BF +#define CFI_MFR_ST 0x0020 /* STMicroelectronics */ void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups); diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 0f32a9b6ff5..5326435a757 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -20,7 +20,6 @@ #define MTD_CHAR_MAJOR 90 #define MTD_BLOCK_MAJOR 31 -#define MAX_MTD_DEVICES 32 #define MTD_ERASE_PENDING 0x01 #define MTD_ERASING 0x02 @@ -61,9 +60,7 @@ struct mtd_erase_region_info { * MTD_OOB_PLACE: oob data are placed at the given offset * MTD_OOB_AUTO: oob data are automatically placed at the free areas * which are defined by the ecclayout - * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data - * is inserted into the data. Thats a raw image of the - * flash contents. + * MTD_OOB_RAW: mode to read oob and data without doing ECC checking */ typedef enum { MTD_OOB_PLACE, @@ -290,8 +287,9 @@ extern int add_mtd_device(struct mtd_info *mtd); extern int del_mtd_device (struct mtd_info *mtd); extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); +extern int __get_mtd_device(struct mtd_info *mtd); +extern void __put_mtd_device(struct mtd_info *mtd); extern struct mtd_info *get_mtd_device_nm(const char *name); - extern void put_mtd_device(struct mtd_info *mtd); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index ccab9dfc521..8bdacb885f9 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -25,11 +25,13 @@ #include <linux/mtd/bbm.h> struct mtd_info; +struct nand_flash_dev; /* Scan and identify a NAND device */ extern int nand_scan (struct mtd_info *mtd, int max_chips); /* Separate phases of nand_scan(), allowing board driver to intervene * and override command or ECC setup according to flash type */ -extern int nand_scan_ident(struct mtd_info *mtd, int max_chips); +extern int nand_scan_ident(struct mtd_info *mtd, int max_chips, + struct nand_flash_dev *table); extern int nand_scan_tail(struct mtd_info *mtd); /* Free resources held by the NAND device */ @@ -38,6 +40,12 @@ extern void nand_release (struct mtd_info *mtd); /* Internal helper for board drivers which need to override command function */ extern void nand_wait_ready(struct mtd_info *mtd); +/* locks all blockes present in the device */ +extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); + +/* unlocks specified locked blockes */ +extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); + /* The maximum number of NAND chips in an array */ #define NAND_MAX_CHIPS 8 @@ -82,6 +90,10 @@ extern void nand_wait_ready(struct mtd_info *mtd); #define NAND_CMD_ERASE2 0xd0 #define NAND_CMD_RESET 0xff +#define NAND_CMD_LOCK 0x2a +#define NAND_CMD_UNLOCK1 0x23 +#define NAND_CMD_UNLOCK2 0x24 + /* Extended commands for large page devices */ #define NAND_CMD_READSTART 0x30 #define NAND_CMD_RNDOUTSTART 0xE0 @@ -170,6 +182,12 @@ typedef enum { /* Chip does not allow subpage writes */ #define NAND_NO_SUBPAGE_WRITE 0x00000200 +/* Device is one of 'new' xD cards that expose fake nand command set */ +#define NAND_BROKEN_XD 0x00000400 + +/* Device behaves just like nand, but is readonly */ +#define NAND_ROM 0x00000800 + /* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS \ (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) @@ -391,6 +409,7 @@ struct nand_chip { int subpagesize; uint8_t cellinfo; int badblockpos; + int badblockbits; flstate_t state; |