diff options
Diffstat (limited to 'include/linux/pci.h')
| -rw-r--r-- | include/linux/pci.h | 1067 |
1 files changed, 1067 insertions, 0 deletions
diff --git a/include/linux/pci.h b/include/linux/pci.h new file mode 100644 index 00000000000..bea13a99e6f --- /dev/null +++ b/include/linux/pci.h @@ -0,0 +1,1067 @@ +/* + * pci.h + * + * PCI defines and function prototypes + * Copyright 1994, Drew Eckhardt + * Copyright 1997--1999 Martin Mares <mj@ucw.cz> + * + * For more information, please consult the following manuals (look at + * http://www.pcisig.com/ for how to get them): + * + * PCI BIOS Specification + * PCI Local Bus Specification + * PCI to PCI Bridge Specification + * PCI System Design Guide + */ + +#ifndef LINUX_PCI_H +#define LINUX_PCI_H + +#include <linux/mod_devicetable.h> + +/* + * Under PCI, each device has 256 bytes of configuration address space, + * of which the first 64 bytes are standardized as follows: + */ +#define PCI_VENDOR_ID 0x00 /* 16 bits */ +#define PCI_DEVICE_ID 0x02 /* 16 bits */ +#define PCI_COMMAND 0x04 /* 16 bits */ +#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ +#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ +#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ +#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ +#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ +#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ +#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ +#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ +#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ +#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ +#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ + +#define PCI_STATUS 0x06 /* 16 bits */ +#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ +#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ +#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ +#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ +#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ +#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ +#define PCI_STATUS_DEVSEL_FAST 0x000 +#define PCI_STATUS_DEVSEL_MEDIUM 0x200 +#define PCI_STATUS_DEVSEL_SLOW 0x400 +#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ +#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ +#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ +#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ +#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ + +#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 + revision */ +#define PCI_REVISION_ID 0x08 /* Revision ID */ +#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ +#define PCI_CLASS_DEVICE 0x0a /* Device class */ + +#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ +#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ +#define PCI_HEADER_TYPE 0x0e /* 8 bits */ +#define PCI_HEADER_TYPE_NORMAL 0 +#define PCI_HEADER_TYPE_BRIDGE 1 +#define PCI_HEADER_TYPE_CARDBUS 2 + +#define PCI_BIST 0x0f /* 8 bits */ +#define PCI_BIST_CODE_MASK 0x0f /* Return result */ +#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ +#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ + +/* + * Base addresses specify locations in memory or I/O space. + * Decoded size can be determined by writing a value of + * 0xffffffff to the register, and reading it back. Only + * 1 bits are decoded. + */ +#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ +#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ +#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ +#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ +#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ +#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ +#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ +#define PCI_BASE_ADDRESS_SPACE_IO 0x01 +#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 +#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 +#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ +#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ +#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ +#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ +#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) +#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) +/* bit 1 is reserved if address_space = 1 */ + +/* Header type 0 (normal devices) */ +#define PCI_CARDBUS_CIS 0x28 +#define PCI_SUBSYSTEM_VENDOR_ID 0x2c +#define PCI_SUBSYSTEM_ID 0x2e +#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ +#define PCI_ROM_ADDRESS_ENABLE 0x01 +#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) + +#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ + +/* 0x35-0x3b are reserved */ +#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ +#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ +#define PCI_MIN_GNT 0x3e /* 8 bits */ +#define PCI_MAX_LAT 0x3f /* 8 bits */ + +/* Header type 1 (PCI-to-PCI bridges) */ +#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ +#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ +#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ +#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ +#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ +#define PCI_IO_LIMIT 0x1d +#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ +#define PCI_IO_RANGE_TYPE_16 0x00 +#define PCI_IO_RANGE_TYPE_32 0x01 +#define PCI_IO_RANGE_MASK (~0x0fUL) +#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ +#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ +#define PCI_MEMORY_LIMIT 0x22 +#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL +#define PCI_MEMORY_RANGE_MASK (~0x0fUL) +#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ +#define PCI_PREF_MEMORY_LIMIT 0x26 +#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL +#define PCI_PREF_RANGE_TYPE_32 0x00 +#define PCI_PREF_RANGE_TYPE_64 0x01 +#define PCI_PREF_RANGE_MASK (~0x0fUL) +#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ +#define PCI_PREF_LIMIT_UPPER32 0x2c +#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ +#define PCI_IO_LIMIT_UPPER16 0x32 +/* 0x34 same as for htype 0 */ +/* 0x35-0x3b is reserved */ +#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_BRIDGE_CONTROL 0x3e +#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ +#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ +#define PCI_BRIDGE_CTL_NO_ISA 0x04 /* Disable bridging of ISA ports */ +#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ +#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ +#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ +#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ + +/* Header type 2 (CardBus bridges) */ +#define PCI_CB_CAPABILITY_LIST 0x14 +/* 0x15 reserved */ +#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ +#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ +#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ +#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ +#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ +#define PCI_CB_MEMORY_BASE_0 0x1c +#define PCI_CB_MEMORY_LIMIT_0 0x20 +#define PCI_CB_MEMORY_BASE_1 0x24 +#define PCI_CB_MEMORY_LIMIT_1 0x28 +#define PCI_CB_IO_BASE_0 0x2c +#define PCI_CB_IO_BASE_0_HI 0x2e +#define PCI_CB_IO_LIMIT_0 0x30 +#define PCI_CB_IO_LIMIT_0_HI 0x32 +#define PCI_CB_IO_BASE_1 0x34 +#define PCI_CB_IO_BASE_1_HI 0x36 +#define PCI_CB_IO_LIMIT_1 0x38 +#define PCI_CB_IO_LIMIT_1_HI 0x3a +#define PCI_CB_IO_RANGE_MASK (~0x03UL) +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_CB_BRIDGE_CONTROL 0x3e +#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ +#define PCI_CB_BRIDGE_CTL_SERR 0x02 +#define PCI_CB_BRIDGE_CTL_ISA 0x04 +#define PCI_CB_BRIDGE_CTL_VGA 0x08 +#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 +#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ +#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 +#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 +#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 +#define PCI_CB_SUBSYSTEM_ID 0x42 +#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ +/* 0x48-0x7f reserved */ + +/* Capability lists */ + +#define PCI_CAP_LIST_ID 0 /* Capability ID */ +#define PCI_CAP_ID_PM 0x01 /* Power Management */ +#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ +#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ +#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ +#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ +#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ +#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ +#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ +#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ +#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ +#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ +#define PCI_CAP_SIZEOF 4 + +/* Power Management Registers */ + +#define PCI_PM_PMC 2 /* PM Capabilities Register */ +#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ +#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ +#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ +#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ +#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxilliary power support mask */ +#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ +#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ +#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ +#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */ +#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ +#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ +#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ +#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ +#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ +#define PCI_PM_CTRL 4 /* PM control and status register */ +#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ +#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ +#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ +#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ +#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ +#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ +#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ +#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */ +#define PCI_PM_DATA_REGISTER 7 /* (??) */ +#define PCI_PM_SIZEOF 8 + +/* AGP registers */ + +#define PCI_AGP_VERSION 2 /* BCD version number */ +#define PCI_AGP_RFU 3 /* Rest of capability flags */ +#define PCI_AGP_STATUS 4 /* Status register */ +#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ +#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ +#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ +#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ +#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ +#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ +#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ +#define PCI_AGP_COMMAND 8 /* Control register */ +#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ +#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ +#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ +#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ +#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ +#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ +#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ +#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ +#define PCI_AGP_SIZEOF 12 + +/* Vital Product Data */ + +#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */ +#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ +#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ +#define PCI_VPD_DATA 4 /* 32-bits of data returned here */ + +/* Slot Identification */ + +#define PCI_SID_ESR 2 /* Expansion Slot Register */ +#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */ +#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ +#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ + +/* Message Signalled Interrupts registers */ + +#define PCI_MSI_FLAGS 2 /* Various flags */ +#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ +#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ +#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ +#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ +#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */ +#define PCI_MSI_RFU 3 /* Rest of capability flags */ +#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ +#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ +#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ +#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ +#define PCI_MSI_MASK_BIT 16 /* Mask bits register */ + +/* CompactPCI Hotswap Register */ + +#define PCI_CHSWP_CSR 2 /* Control and Status Register */ +#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ +#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ +#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ +#define PCI_CHSWP_LOO 0x08 /* LED On / Off */ +#define PCI_CHSWP_PI 0x30 /* Programming Interface */ +#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ +#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ + +/* PCI-X registers */ + +#define PCI_X_CMD 2 /* Modes & Features */ +#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ +#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ +#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ +#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ +#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ +#define PCI_X_STATUS 4 /* PCI-X capabilities */ +#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ +#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ +#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ +#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ +#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ +#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */ +#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ +#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */ +#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */ +#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */ +#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ +#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ +#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ + +/* PCI Express capability registers */ + +#define PCI_EXP_FLAGS 2 /* Capabilities register */ +#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ +#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ +#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ +#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ +#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ +#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ +#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ +#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ +#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ +#define PCI_EXP_DEVCAP 4 /* Device capabilities */ +#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ +#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ +#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ +#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ +#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ +#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ +#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ +#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ +#define PCI_EXP_DEVCTL 8 /* Device Control */ +#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ +#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ +#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ +#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ +#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ +#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ +#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ +#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ +#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ +#define PCI_EXP_DEVSTA 10 /* Device Status */ +#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ +#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ +#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ +#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ +#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ +#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ +#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKCTL 16 /* Link Control */ +#define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_RTCTL 28 /* Root Control */ +#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ +#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ +#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ +#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ +#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ +#define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTSTA 32 /* Root Status */ + +/* Extended Capabilities (PCI-X 2.0 and Express) */ +#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) +#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) +#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) + +#define PCI_EXT_CAP_ID_ERR 1 +#define PCI_EXT_CAP_ID_VC 2 +#define PCI_EXT_CAP_ID_DSN 3 +#define PCI_EXT_CAP_ID_PWR 4 + +/* Advanced Error Reporting */ +#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ +#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ +#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ +#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ +#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ +#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ +#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ +#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ +#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ +#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ +#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ +#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ +#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ + /* Same bits as above */ +#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ +#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ +#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ +#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ +#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ +#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ +#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ +#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ +#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ +#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ +#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ +#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ +#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ +#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +#define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_COR_SRC 52 +#define PCI_ERR_ROOT_SRC 54 + +/* Virtual Channel */ +#define PCI_VC_PORT_REG1 4 +#define PCI_VC_PORT_REG2 8 +#define PCI_VC_PORT_CTRL 12 +#define PCI_VC_PORT_STATUS 14 +#define PCI_VC_RES_CAP 16 +#define PCI_VC_RES_CTRL 20 +#define PCI_VC_RES_STATUS 26 + +/* Power Budgeting */ +#define PCI_PWR_DSR 4 /* Data Select Register */ +#define PCI_PWR_DATA 8 /* Data Register */ +#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ +#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ +#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ +#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ +#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ +#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ +#define PCI_PWR_CAP 12 /* Capability */ +#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ + +/* Include the ID list */ + +#include <linux/pci_ids.h> + +/* + * The PCI interface treats multi-function devices as independent + * devices. The slot/function address of each device is encoded + * in a single byte as follows: + * + * 7:3 = slot + * 2:0 = function + */ +#define PCI_DEVFN(slot,func) ((((slot) & 0x1f) << 3) | ((func) & 0x07)) +#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f) +#define PCI_FUNC(devfn) ((devfn) & 0x07) + +/* Ioctls for /proc/bus/pci/X/Y nodes. */ +#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8) +#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */ +#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */ +#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */ +#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */ + +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <linux/config.h> +#include <linux/ioport.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/device.h> + +/* File state for mmap()s on /proc/bus/pci/X/Y */ +enum pci_mmap_state { + pci_mmap_io, + pci_mmap_mem +}; + +/* This defines the direction arg to the DMA mapping routines. */ +#define PCI_DMA_BIDIRECTIONAL 0 +#define PCI_DMA_TODEVICE 1 +#define PCI_DMA_FROMDEVICE 2 +#define PCI_DMA_NONE 3 + +#define DEVICE_COUNT_COMPATIBLE 4 +#define DEVICE_COUNT_RESOURCE 12 + +typedef int __bitwise pci_power_t; + +#define PCI_D0 ((pci_power_t __force) 0) +#define PCI_D1 ((pci_power_t __force) 1) +#define PCI_D2 ((pci_power_t __force) 2) +#define PCI_D3hot ((pci_power_t __force) 3) +#define PCI_D3cold ((pci_power_t __force) 4) + +/* + * The pci_dev structure is used to describe PCI devices. + */ +struct pci_dev { + struct list_head global_list; /* node in list of all PCI devices */ + struct list_head bus_list; /* node in per-bus list */ + struct pci_bus *bus; /* bus this device is on */ + struct pci_bus *subordinate; /* bus this device bridges to */ + + void *sysdata; /* hook for sys-specific extension */ + struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */ + + unsigned int devfn; /* encoded device & function index */ + unsigned short vendor; + unsigned short device; + unsigned short subsystem_vendor; + unsigned short subsystem_device; + unsigned int class; /* 3 bytes: (base,sub,prog-if) */ + u8 hdr_type; /* PCI header type (`multi' flag masked out) */ + u8 rom_base_reg; /* which config register controls the ROM */ + + struct pci_driver *driver; /* which driver has allocated this device */ + u64 dma_mask; /* Mask of the bits of bus address this + device implements. Normally this is + 0xffffffff. You only need to change + this if your device has broken DMA + or supports 64-bit transfers. */ + + pci_power_t current_state; /* Current operating state. In ACPI-speak, + this is D0-D3, D0 being fully functional, + and D3 being off. */ + + struct device dev; /* Generic device interface */ + + /* device is compatible with these IDs */ + unsigned short vendor_compatible[DEVICE_COUNT_COMPATIBLE]; + unsigned short device_compatible[DEVICE_COUNT_COMPATIBLE]; + + int cfg_size; /* Size of configuration space */ + + /* + * Instead of touching interrupt line and base address registers + * directly, use the values stored here. They might be different! + */ + unsigned int irq; + struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */ + + /* These fields are used by common fixups */ + unsigned int transparent:1; /* Transparent PCI bridge */ + unsigned int multifunction:1;/* Part of multi-function device */ + /* keep track of device state */ + unsigned int is_enabled:1; /* pci_enable_device has been called */ + unsigned int is_busmaster:1; /* device is busmaster */ + + u32 saved_config_space[16]; /* config space saved at suspend time */ + struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ + int rom_attr_enabled; /* has display of the rom attribute been enabled? */ + struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */ +#ifdef CONFIG_PCI_NAMES +#define PCI_NAME_SIZE 255 +#define PCI_NAME_HALF __stringify(43) /* less than half to handle slop */ + char pretty_name[PCI_NAME_SIZE]; /* pretty name for users to see */ +#endif +}; + +#define pci_dev_g(n) list_entry(n, struct pci_dev, global_list) +#define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list) +#define to_pci_dev(n) container_of(n, struct pci_dev, dev) +#define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL) + +/* + * For PCI devices, the region numbers are assigned this way: + * + * 0-5 standard PCI regions + * 6 expansion ROM + * 7-10 bridges: address space assigned to buses behind the bridge + */ + +#define PCI_ROM_RESOURCE 6 +#define PCI_BRIDGE_RESOURCES 7 +#define PCI_NUM_RESOURCES 11 + +#ifndef PCI_BUS_NUM_RESOURCES +#define PCI_BUS_NUM_RESOURCES 4 +#endif + +#define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ + +struct pci_bus { + struct list_head node; /* node in list of buses */ + struct pci_bus *parent; /* parent bus this bridge is on */ + struct list_head children; /* list of child buses */ + struct list_head devices; /* list of devices on this bus */ + struct pci_dev *self; /* bridge device as seen by parent */ + struct resource *resource[PCI_BUS_NUM_RESOURCES]; + /* address space routed to this bus */ + + struct pci_ops *ops; /* configuration access functions */ + void *sysdata; /* hook for sys-specific extension */ + struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */ + + unsigned char number; /* bus number */ + unsigned char primary; /* number of primary bridge */ + unsigned char secondary; /* number of secondary bridge */ + unsigned char subordinate; /* max number of subordinate buses */ + + char name[48]; + + unsigned short bridge_ctl; /* manage NO_ISA/FBB/et al behaviors */ + unsigned short pad2; + struct device *bridge; + struct class_device class_dev; + struct bin_attribute *legacy_io; /* legacy I/O for this bus */ + struct bin_attribute *legacy_mem; /* legacy mem */ +}; + +#define pci_bus_b(n) list_entry(n, struct pci_bus, node) +#define to_pci_bus(n) container_of(n, struct pci_bus, class_dev) + +/* + * Error values that may be returned by PCI functions. + */ +#define PCIBIOS_SUCCESSFUL 0x00 +#define PCIBIOS_FUNC_NOT_SUPPORTED 0x81 +#define PCIBIOS_BAD_VENDOR_ID 0x83 +#define PCIBIOS_DEVICE_NOT_FOUND 0x86 +#define PCIBIOS_BAD_REGISTER_NUMBER 0x87 +#define PCIBIOS_SET_FAILED 0x88 +#define PCIBIOS_BUFFER_TOO_SMALL 0x89 + +/* Low-level architecture-dependent routines */ + +struct pci_ops { + int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val); + int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val); +}; + +struct pci_raw_ops { + int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn, + int reg, int len, u32 *val); + int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn, + int reg, int len, u32 val); +}; + +extern struct pci_raw_ops *raw_pci_ops; + +struct pci_bus_region { + unsigned long start; + unsigned long end; +}; + +struct pci_dynids { + spinlock_t lock; /* protects list, index */ + struct list_head list; /* for IDs added at runtime */ + unsigned int use_driver_data:1; /* pci_driver->driver_data is used */ +}; + +struct module; +struct pci_driver { + struct list_head node; + char *name; + struct module *owner; + const struct pci_device_id *id_table; /* must be non-NULL for probe to be called */ + int (*probe) (struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ + void (*remove) (struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ + int (*suspend) (struct pci_dev *dev, pm_message_t state); /* Device suspended */ + int (*resume) (struct pci_dev *dev); /* Device woken up */ + int (*enable_wake) (struct pci_dev *dev, u32 state, int enable); /* Enable wake event */ + + struct device_driver driver; + struct pci_dynids dynids; +}; + +#define to_pci_driver(drv) container_of(drv,struct pci_driver, driver) + +/** + * PCI_DEVICE - macro used to describe a specific pci device + * @vend: the 16 bit PCI Vendor ID + * @dev: the 16 bit PCI Device ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific device. The subvendor and subdevice fields will be set to + * PCI_ANY_ID. + */ +#define PCI_DEVICE(vend,dev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID + +/** + * PCI_DEVICE_CLASS - macro used to describe a specific pci device class + * @dev_class: the class, subclass, prog-if triple for this device + * @dev_class_mask: the class mask for this device + * + * This macro is used to create a struct pci_device_id that matches a + * specific PCI class. The vendor, device, subvendor, and subdevice + * fields will be set to PCI_ANY_ID. + */ +#define PCI_DEVICE_CLASS(dev_class,dev_class_mask) \ + .class = (dev_class), .class_mask = (dev_class_mask), \ + .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID + +/* + * pci_module_init is obsolete, this stays here till we fix up all usages of it + * in the tree. + */ +#define pci_module_init pci_register_driver + +/* these external functions are only available when PCI support is enabled */ +#ifdef CONFIG_PCI + +extern struct bus_type pci_bus_type; + +/* Do NOT directly access these two variables, unless you are arch specific pci + * code, or pci core code. */ +extern struct list_head pci_root_buses; /* list of all known PCI buses */ +extern struct list_head pci_devices; /* list of all devices */ + +void pcibios_fixup_bus(struct pci_bus *); +int pcibios_enable_device(struct pci_dev *, int mask); +char *pcibios_setup (char *str); + +/* Used only when drivers/pci/setup.c is used */ +void pcibios_align_resource(void *, struct resource *, + unsigned long, unsigned long); +void pcibios_update_irq(struct pci_dev *, int irq); + +/* Generic PCI functions used internally */ + +extern struct pci_bus *pci_find_bus(int domain, int busnr); +struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); +static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata) +{ + return pci_scan_bus_parented(NULL, bus, ops, sysdata); +} +int pci_scan_slot(struct pci_bus *bus, int devfn); +struct pci_dev * pci_scan_single_device(struct pci_bus *bus, int devfn); +unsigned int pci_scan_child_bus(struct pci_bus *bus); +void pci_bus_add_device(struct pci_dev *dev); +void pci_bus_add_devices(struct pci_bus *bus); +void pci_name_device(struct pci_dev *dev); +char *pci_class_name(u32 class); +void pci_read_bridge_bases(struct pci_bus *child); +struct resource *pci_find_parent_resource(const struct pci_dev *dev, struct resource *res); +int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); +extern struct pci_dev *pci_dev_get(struct pci_dev *dev); +extern void pci_dev_put(struct pci_dev *dev); +extern void pci_remove_bus(struct pci_bus *b); +extern void pci_remove_bus_device(struct pci_dev *dev); + +/* Generic PCI functions exported to card drivers */ + +struct pci_dev *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from); +struct pci_dev *pci_find_device_reverse (unsigned int vendor, unsigned int device, const struct pci_dev *from); +struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn); +int pci_find_capability (struct pci_dev *dev, int cap); +int pci_find_ext_capability (struct pci_dev *dev, int cap); +struct pci_bus * pci_find_next_bus(const struct pci_bus *from); + +struct pci_dev *pci_get_device (unsigned int vendor, unsigned int device, struct pci_dev *from); +struct pci_dev *pci_get_subsys (unsigned int vendor, unsigned int device, + unsigned int ss_vendor, unsigned int ss_device, + struct pci_dev *from); +struct pci_dev *pci_get_slot (struct pci_bus *bus, unsigned int devfn); +struct pci_dev *pci_get_class (unsigned int class, struct pci_dev *from); +int pci_dev_present(const struct pci_device_id *ids); + +int pci_bus_read_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 *val); +int pci_bus_read_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 *val); +int pci_bus_read_config_dword (struct pci_bus *bus, unsigned int devfn, int where, u32 *val); +int pci_bus_write_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 val); +int pci_bus_write_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 val); +int pci_bus_write_config_dword (struct pci_bus *bus, unsigned int devfn, int where, u32 val); + +static inline int pci_read_config_byte(struct pci_dev *dev, int where, u8 *val) +{ + return pci_bus_read_config_byte (dev->bus, dev->devfn, where, val); +} +static inline int pci_read_config_word(struct pci_dev *dev, int where, u16 *val) +{ + return pci_bus_read_config_word (dev->bus, dev->devfn, where, val); +} +static inline int pci_read_config_dword(struct pci_dev *dev, int where, u32 *val) +{ + return pci_bus_read_config_dword (dev->bus, dev->devfn, where, val); +} +static inline int pci_write_config_byte(struct pci_dev *dev, int where, u8 val) +{ + return pci_bus_write_config_byte (dev->bus, dev->devfn, where, val); +} +static inline int pci_write_config_word(struct pci_dev *dev, int where, u16 val) +{ + return pci_bus_write_config_word (dev->bus, dev->devfn, where, val); +} +static inline int pci_write_config_dword(struct pci_dev *dev, int where, u32 val) +{ + return pci_bus_write_config_dword (dev->bus, dev->devfn, where, val); +} + +int pci_enable_device(struct pci_dev *dev); +int pci_enable_device_bars(struct pci_dev *dev, int mask); +void pci_disable_device(struct pci_dev *dev); +void pci_set_master(struct pci_dev *dev); +#define HAVE_PCI_SET_MWI +int pci_set_mwi(struct pci_dev *dev); +void pci_clear_mwi(struct pci_dev *dev); +int pci_set_dma_mask(struct pci_dev *dev, u64 mask); +int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask); +int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask); +int pci_assign_resource(struct pci_dev *dev, int i); + +/* ROM control related routines */ +void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size); +void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size); +void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom); +void pci_remove_rom(struct pci_dev *pdev); + +/* Power management related routines */ +int pci_save_state(struct pci_dev *dev); +int pci_restore_state(struct pci_dev *dev); +int pci_set_power_state(struct pci_dev *dev, pci_power_t state); +pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); +int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable); + +/* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */ +void pci_bus_assign_resources(struct pci_bus *bus); +void pci_bus_size_bridges(struct pci_bus *bus); +int pci_claim_resource(struct pci_dev *, int); +void pci_assign_unassigned_resources(void); +void pdev_enable_device(struct pci_dev *); +void pdev_sort_resources(struct pci_dev *, struct resource_list *); +void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *), + int (*)(struct pci_dev *, u8, u8)); +#define HAVE_PCI_REQ_REGIONS 2 +int pci_request_regions(struct pci_dev *, char *); +void pci_release_regions(struct pci_dev *); +int pci_request_region(struct pci_dev *, int, char *); +void pci_release_region(struct pci_dev *, int); + +/* drivers/pci/bus.c */ +int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, + unsigned long size, unsigned long align, + unsigned long min, unsigned int type_mask, + void (*alignf)(void *, struct resource *, + unsigned long, unsigned long), + void *alignf_data); +void pci_enable_bridges(struct pci_bus *bus); + +/* New-style probing supporting hot-pluggable devices */ +int pci_register_driver(struct pci_driver *); +void pci_unregister_driver(struct pci_driver *); +void pci_remove_behind_bridge(struct pci_dev *); +struct pci_driver *pci_dev_driver(const struct pci_dev *); +const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev); +int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass); + +/* kmem_cache style wrapper around pci_alloc_consistent() */ + +#include <linux/dmapool.h> + +#define pci_pool dma_pool +#define pci_pool_create(name, pdev, size, align, allocation) \ + dma_pool_create(name, &pdev->dev, size, align, allocation) +#define pci_pool_destroy(pool) dma_pool_destroy(pool) +#define pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle) +#define pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr) + +#if defined(CONFIG_ISA) || defined(CONFIG_EISA) +extern struct pci_dev *isa_bridge; +#endif + +struct msix_entry { + u16 vector; /* kernel uses to write allocated vector */ + u16 entry; /* driver uses to specify entry, OS writes */ +}; + +#ifndef CONFIG_PCI_MSI +static inline void pci_scan_msi_device(struct pci_dev *dev) {} +static inline int pci_enable_msi(struct pci_dev *dev) {return -1;} +static inline void pci_disable_msi(struct pci_dev *dev) {} +static inline int pci_enable_msix(struct pci_dev* dev, + struct msix_entry *entries, int nvec) {return -1;} +static inline void pci_disable_msix(struct pci_dev *dev) {} +static inline void msi_remove_pci_irq_vectors(struct pci_dev *dev) {} +#else +extern void pci_scan_msi_device(struct pci_dev *dev); +extern int pci_enable_msi(struct pci_dev *dev); +extern void pci_disable_msi(struct pci_dev *dev); +extern int pci_enable_msix(struct pci_dev* dev, + struct msix_entry *entries, int nvec); +extern void pci_disable_msix(struct pci_dev *dev); +extern void msi_remove_pci_irq_vectors(struct pci_dev *dev); +#endif + +#endif /* CONFIG_PCI */ + +/* Include architecture-dependent settings and functions */ + +#include <asm/pci.h> + +/* + * If the system does not have PCI, clearly these return errors. Define + * these as simple inline functions to avoid hair in drivers. + */ + +#ifndef CONFIG_PCI +#define _PCI_NOP(o,s,t) \ + static inline int pci_##o##_config_##s (struct pci_dev *dev, int where, t val) \ + { return PCIBIOS_FUNC_NOT_SUPPORTED; } +#define _PCI_NOP_ALL(o,x) _PCI_NOP(o,byte,u8 x) \ + _PCI_NOP(o,word,u16 x) \ + _PCI_NOP(o,dword,u32 x) +_PCI_NOP_ALL(read, *) +_PCI_NOP_ALL(write,) + +static inline struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, const struct pci_dev *from) +{ return NULL; } + +static inline struct pci_dev *pci_find_slot(unsigned int bus, unsigned int devfn) +{ return NULL; } + +static inline struct pci_dev *pci_get_device (unsigned int vendor, unsigned int device, struct pci_dev *from) +{ return NULL; } + +static inline struct pci_dev *pci_get_subsys (unsigned int vendor, unsigned int device, +unsigned int ss_vendor, unsigned int ss_device, struct pci_dev *from) +{ return NULL; } + +static inline struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from) +{ return NULL; } + +#define pci_dev_present(ids) (0) +#define pci_dev_put(dev) do { } while (0) + +static inline void pci_set_master(struct pci_dev *dev) { } +static inline int pci_enable_device(struct pci_dev *dev) { return -EIO; } +static inline void pci_disable_device(struct pci_dev *dev) { } +static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) { return -EIO; } +static inline int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask) { return -EIO; } +static inline int pci_assign_resource(struct pci_dev *dev, int i) { return -EBUSY;} +static inline int pci_register_driver(struct pci_driver *drv) { return 0;} +static inline void pci_unregister_driver(struct pci_driver *drv) { } +static inline int pci_find_capability (struct pci_dev *dev, int cap) {return 0; } +static inline int pci_find_ext_capability (struct pci_dev *dev, int cap) {return 0; } +static inline const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev) { return NULL; } + +/* Power management related routines */ +static inline int pci_save_state(struct pci_dev *dev) { return 0; } +static inline int pci_restore_state(struct pci_dev *dev) { return 0; } +static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { return 0; } +static inline pci_power_t pci_choose_state(struct pci_dev *dev, u32 state) { return PCI_D0; } +static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { return 0; } + +#define isa_bridge ((struct pci_dev *)NULL) + +#else + +/* + * PCI domain support. Sometimes called PCI segment (eg by ACPI), + * a PCI domain is defined to be a set of PCI busses which share + * configuration space. + */ +#ifndef CONFIG_PCI_DOMAINS +static inline int pci_domain_nr(struct pci_bus *bus) { return 0; } +static inline int pci_proc_domain(struct pci_bus *bus) +{ + return 0; +} +#endif + +#endif /* !CONFIG_PCI */ + +/* these helpers provide future and backwards compatibility + * for accessing popular PCI BAR info */ +#define pci_resource_start(dev,bar) ((dev)->resource[(bar)].start) +#define pci_resource_end(dev,bar) ((dev)->resource[(bar)].end) +#define pci_resource_flags(dev,bar) ((dev)->resource[(bar)].flags) +#define pci_resource_len(dev,bar) \ + ((pci_resource_start((dev),(bar)) == 0 && \ + pci_resource_end((dev),(bar)) == \ + pci_resource_start((dev),(bar))) ? 0 : \ + \ + (pci_resource_end((dev),(bar)) - \ + pci_resource_start((dev),(bar)) + 1)) + +/* Similar to the helpers above, these manipulate per-pci_dev + * driver-specific data. They are really just a wrapper around + * the generic device structure functions of these calls. + */ +static inline void *pci_get_drvdata (struct pci_dev *pdev) +{ + return dev_get_drvdata(&pdev->dev); +} + +static inline void pci_set_drvdata (struct pci_dev *pdev, void *data) +{ + dev_set_drvdata(&pdev->dev, data); +} + +/* If you want to know what to call your pci_dev, ask this function. + * Again, it's a wrapper around the generic device. + */ +static inline char *pci_name(struct pci_dev *pdev) +{ + return pdev->dev.bus_id; +} + +/* Some archs want to see the pretty pci name, so use this macro */ +#ifdef CONFIG_PCI_NAMES +#define pci_pretty_name(dev) ((dev)->pretty_name) +#else +#define pci_pretty_name(dev) "" +#endif + +/* + * The world is not perfect and supplies us with broken PCI devices. + * For at least a part of these bugs we need a work-around, so both + * generic (drivers/pci/quirks.c) and per-architecture code can define + * fixup hooks to be called for particular buggy devices. + */ + +struct pci_fixup { + u16 vendor, device; /* You can use PCI_ANY_ID here of course */ + void (*hook)(struct pci_dev *dev); +}; + +enum pci_fixup_pass { + pci_fixup_early, /* Before probing BARs */ + pci_fixup_header, /* After reading configuration header */ + pci_fixup_final, /* Final phase of device fixups */ + pci_fixup_enable, /* pci_enable_device() time */ +}; + +/* Anonymous variables would be nice... */ +#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \ + static struct pci_fixup __pci_fixup_##name __attribute_used__ \ + __attribute__((__section__(#section))) = { vendor, device, hook }; +#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ + vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ + vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ + vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ + vendor##device##hook, vendor, device, hook) + + +void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); + +extern int pci_pci_problems; +#define PCIPCI_FAIL 1 +#define PCIPCI_TRITON 2 +#define PCIPCI_NATOMA 4 +#define PCIPCI_VIAETBF 8 +#define PCIPCI_VSFX 16 +#define PCIPCI_ALIMAGIK 32 + +#endif /* __KERNEL__ */ +#endif /* LINUX_PCI_H */ |