diff options
Diffstat (limited to 'include/linux/platform_data/dma-ste-dma40.h')
| -rw-r--r-- | include/linux/platform_data/dma-ste-dma40.h | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h new file mode 100644 index 00000000000..9ff93b06568 --- /dev/null +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -0,0 +1,223 @@ +/* + * Copyright (C) ST-Ericsson SA 2007-2010 + * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + + +#ifndef STE_DMA40_H +#define STE_DMA40_H + +#include <linux/dmaengine.h> +#include <linux/scatterlist.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> + +/* + * Maxium size for a single dma descriptor + * Size is limited to 16 bits. + * Size is in the units of addr-widths (1,2,4,8 bytes) + * Larger transfers will be split up to multiple linked desc + */ +#define STEDMA40_MAX_SEG_SIZE 0xFFFF + +/* dev types for memcpy */ +#define STEDMA40_DEV_DST_MEMORY (-1) +#define STEDMA40_DEV_SRC_MEMORY (-1) + +enum stedma40_mode { + STEDMA40_MODE_LOGICAL = 0, + STEDMA40_MODE_PHYSICAL, + STEDMA40_MODE_OPERATION, +}; + +enum stedma40_mode_opt { + STEDMA40_PCHAN_BASIC_MODE = 0, + STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, + STEDMA40_PCHAN_MODULO_MODE, + STEDMA40_PCHAN_DOUBLE_DST_MODE, + STEDMA40_LCHAN_SRC_PHY_DST_LOG, + STEDMA40_LCHAN_SRC_LOG_DST_PHY, +}; + +#define STEDMA40_ESIZE_8_BIT 0x0 +#define STEDMA40_ESIZE_16_BIT 0x1 +#define STEDMA40_ESIZE_32_BIT 0x2 +#define STEDMA40_ESIZE_64_BIT 0x3 + +/* The value 4 indicates that PEN-reg shall be set to 0 */ +#define STEDMA40_PSIZE_PHY_1 0x4 +#define STEDMA40_PSIZE_PHY_2 0x0 +#define STEDMA40_PSIZE_PHY_4 0x1 +#define STEDMA40_PSIZE_PHY_8 0x2 +#define STEDMA40_PSIZE_PHY_16 0x3 + +/* + * The number of elements differ in logical and + * physical mode + */ +#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 +#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 +#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 +#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 + +/* Maximum number of possible physical channels */ +#define STEDMA40_MAX_PHYS 32 + +enum stedma40_flow_ctrl { + STEDMA40_NO_FLOW_CTRL, + STEDMA40_FLOW_CTRL, +}; + +enum stedma40_periph_data_width { + STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, + STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, + STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, + STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT +}; + +enum stedma40_xfer_dir { + STEDMA40_MEM_TO_MEM = 1, + STEDMA40_MEM_TO_PERIPH, + STEDMA40_PERIPH_TO_MEM, + STEDMA40_PERIPH_TO_PERIPH +}; + + +/** + * struct stedma40_chan_cfg - dst/src channel configuration + * + * @big_endian: true if the src/dst should be read as big endian + * @data_width: Data width of the src/dst hardware + * @p_size: Burst size + * @flow_ctrl: Flow control on/off. + */ +struct stedma40_half_channel_info { + bool big_endian; + enum stedma40_periph_data_width data_width; + int psize; + enum stedma40_flow_ctrl flow_ctrl; +}; + +/** + * struct stedma40_chan_cfg - Structure to be filled by client drivers. + * + * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH + * @high_priority: true if high-priority + * @realtime: true if realtime mode is to be enabled. Only available on DMA40 + * version 3+, i.e DB8500v2+ + * @mode: channel mode: physical, logical, or operation + * @mode_opt: options for the chosen channel mode + * @src_dev_type: Src device type + * @dst_dev_type: Dst device type + * @src_info: Parameters for dst half channel + * @dst_info: Parameters for dst half channel + * @use_fixed_channel: if true, use physical channel specified by phy_channel + * @phy_channel: physical channel to use, only if use_fixed_channel is true + * + * This structure has to be filled by the client drivers. + * It is recommended to do all dma configurations for clients in the machine. + * + */ +struct stedma40_chan_cfg { + enum stedma40_xfer_dir dir; + bool high_priority; + bool realtime; + enum stedma40_mode mode; + enum stedma40_mode_opt mode_opt; + int src_dev_type; + int dst_dev_type; + struct stedma40_half_channel_info src_info; + struct stedma40_half_channel_info dst_info; + + bool use_fixed_channel; + int phy_channel; +}; + +/** + * struct stedma40_platform_data - Configuration struct for the dma device. + * + * @dev_len: length of dev_tx and dev_rx + * @dev_tx: mapping between destination event line and io address + * @dev_rx: mapping between source event line and io address + * @memcpy: list of memcpy event lines + * @memcpy_len: length of memcpy + * @memcpy_conf_phy: default configuration of physical channel memcpy + * @memcpy_conf_log: default configuration of logical channel memcpy + * @disabled_channels: A vector, ending with -1, that marks physical channels + * that are for different reasons not available for the driver. + */ +struct stedma40_platform_data { + u32 dev_len; + const dma_addr_t *dev_tx; + const dma_addr_t *dev_rx; + int *memcpy; + u32 memcpy_len; + struct stedma40_chan_cfg *memcpy_conf_phy; + struct stedma40_chan_cfg *memcpy_conf_log; + int disabled_channels[STEDMA40_MAX_PHYS]; + bool use_esram_lcla; +}; + +#ifdef CONFIG_STE_DMA40 + +/** + * stedma40_filter() - Provides stedma40_chan_cfg to the + * ste_dma40 dma driver via the dmaengine framework. + * does some checking of what's provided. + * + * Never directly called by client. It used by dmaengine. + * @chan: dmaengine handle. + * @data: Must be of type: struct stedma40_chan_cfg and is + * the configuration of the framework. + * + * + */ + +bool stedma40_filter(struct dma_chan *chan, void *data); + +/** + * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave + * (=device) + * + * @chan: dmaengine handle + * @addr: source or destination physicall address. + * @size: bytes to transfer + * @direction: direction of transfer + * @flags: is actually enum dma_ctrl_flags. See dmaengine.h + */ + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_transfer_direction direction, + unsigned long flags) +{ + struct scatterlist sg; + sg_init_table(&sg, 1); + sg.dma_address = addr; + sg.length = size; + + return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); +} + +#else +static inline bool stedma40_filter(struct dma_chan *chan, void *data) +{ + return false; +} + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_transfer_direction direction, + unsigned long flags) +{ + return NULL; +} +#endif + +#endif |