diff options
Diffstat (limited to 'include/linux/platform_data/mtd-davinci.h')
| -rw-r--r-- | include/linux/platform_data/mtd-davinci.h | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h new file mode 100644 index 00000000000..1cf555aef89 --- /dev/null +++ b/include/linux/platform_data/mtd-davinci.h @@ -0,0 +1,90 @@ +/* + * mach-davinci/nand.h + * + * Copyright © 2006 Texas Instruments. + * + * Ported to 2.6.23 Copyright © 2008 by + * Sander Huijsen <Shuijsen@optelecom-nkf.com> + * Troy Kisky <troy.kisky@boundarydevices.com> + * Dirk Behme <Dirk.Behme@gmail.com> + * + * -------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_DAVINCI_NAND_H +#define __ARCH_ARM_DAVINCI_NAND_H + +#include <linux/mtd/nand.h> + +#define NANDFCR_OFFSET 0x60 +#define NANDFSR_OFFSET 0x64 +#define NANDF1ECC_OFFSET 0x70 + +/* 4-bit ECC syndrome registers */ +#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc +#define NAND_4BIT_ECC1_OFFSET 0xc0 +#define NAND_4BIT_ECC2_OFFSET 0xc4 +#define NAND_4BIT_ECC3_OFFSET 0xc8 +#define NAND_4BIT_ECC4_OFFSET 0xcc +#define NAND_ERR_ADD1_OFFSET 0xd0 +#define NAND_ERR_ADD2_OFFSET 0xd4 +#define NAND_ERR_ERRVAL1_OFFSET 0xd8 +#define NAND_ERR_ERRVAL2_OFFSET 0xdc + +/* NOTE: boards don't need to use these address bits + * for ALE/CLE unless they support booting from NAND. + * They're used unless platform data overrides them. + */ +#define MASK_ALE 0x08 +#define MASK_CLE 0x10 + +struct davinci_nand_pdata { /* platform_data */ + uint32_t mask_ale; + uint32_t mask_cle; + + /* for packages using two chipselects */ + uint32_t mask_chipsel; + + /* board's default static partition info */ + struct mtd_partition *parts; + unsigned nr_parts; + + /* none == NAND_ECC_NONE (strongly *not* advised!!) + * soft == NAND_ECC_SOFT + * else == NAND_ECC_HW, according to ecc_bits + * + * All DaVinci-family chips support 1-bit hardware ECC. + * Newer ones also support 4-bit ECC, but are awkward + * using it with large page chips. + */ + nand_ecc_modes_t ecc_mode; + u8 ecc_bits; + + /* e.g. NAND_BUSWIDTH_16 */ + unsigned options; + /* e.g. NAND_BBT_USE_FLASH */ + unsigned bbt_options; + + /* Main and mirror bbt descriptor overrides */ + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; + + /* Access timings */ + struct davinci_aemif_timing *timing; +}; + +#endif /* __ARCH_ARM_DAVINCI_NAND_H */ |