diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/asoc-mx27vis.h | 11 | ||||
| -rw-r--r-- | include/linux/platform_data/asoc-ti-mcbsp.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/davinci_asp.h | 105 | ||||
| -rw-r--r-- | include/linux/platform_data/exynos_thermal.h (renamed from include/linux/platform_data/exynos4_tmu.h) | 47 | ||||
| -rw-r--r-- | include/linux/platform_data/i2c-nomadik.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-lm3556.h | 50 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-lm355x.h | 66 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-lm3642.h | 38 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-pca9633.h | 35 | ||||
| -rw-r--r-- | include/linux/platform_data/lm3630_bl.h | 57 | ||||
| -rw-r--r-- | include/linux/platform_data/lm3639_bl.h | 69 | ||||
| -rw-r--r-- | include/linux/platform_data/lp855x.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/lp8727.h | 51 | ||||
| -rw-r--r-- | include/linux/platform_data/mipi-csis.h | 30 | ||||
| -rw-r--r-- | include/linux/platform_data/mmp_dma.h | 19 | ||||
| -rw-r--r-- | include/linux/platform_data/omap-twl4030.h | 32 | ||||
| -rw-r--r-- | include/linux/platform_data/pxa_sdhci.h | 1 |
17 files changed, 515 insertions, 102 deletions
diff --git a/include/linux/platform_data/asoc-mx27vis.h b/include/linux/platform_data/asoc-mx27vis.h new file mode 100644 index 00000000000..409adcd04d0 --- /dev/null +++ b/include/linux/platform_data/asoc-mx27vis.h @@ -0,0 +1,11 @@ +#ifndef __PLATFORM_DATA_ASOC_MX27VIS_H +#define __PLATFORM_DATA_ASOC_MX27VIS_H + +struct snd_mx27vis_platform_data { + int amp_gain0_gpio; + int amp_gain1_gpio; + int amp_mutel_gpio; + int amp_muter_gpio; +}; + +#endif /* __PLATFORM_DATA_ASOC_MX27VIS_H */ diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h index 18814127809..c78d90b28b1 100644 --- a/include/linux/platform_data/asoc-ti-mcbsp.h +++ b/include/linux/platform_data/asoc-ti-mcbsp.h @@ -47,8 +47,6 @@ struct omap_mcbsp_platform_data { bool has_wakeup; /* Wakeup capability */ bool has_ccr; /* Transceiver has configuration control registers */ int (*enable_st_clock)(unsigned int, bool); - int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src); - int (*mux_signal)(struct device *dev, const char *signal, const char *src); }; /** diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h new file mode 100644 index 00000000000..d0c5825876f --- /dev/null +++ b/include/linux/platform_data/davinci_asp.h @@ -0,0 +1,105 @@ +/* + * TI DaVinci Audio Serial Port support + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DAVINCI_ASP_H +#define __DAVINCI_ASP_H + +struct snd_platform_data { + u32 tx_dma_offset; + u32 rx_dma_offset; + int asp_chan_q; /* event queue number for ASP channel */ + int ram_chan_q; /* event queue number for RAM channel */ + unsigned int codec_fmt; + /* + * Allowing this is more efficient and eliminates left and right swaps + * caused by underruns, but will swap the left and right channels + * when compared to previous behavior. + */ + unsigned enable_channel_combine:1; + unsigned sram_size_playback; + unsigned sram_size_capture; + + /* + * If McBSP peripheral gets the clock from an external pin, + * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR + * and MCBSP_CLKS. + * Depending on different hardware connections it is possible + * to use this setting to change the behaviour of McBSP + * driver. + */ + int clk_input_pin; + + /* + * This flag works when both clock and FS are outputs for the cpu + * and makes clock more accurate (FS is not symmetrical and the + * clock is very fast. + * The clock becoming faster is named + * i2s continuous serial clock (I2S_SCK) and it is an externally + * visible bit clock. + * + * first line : WordSelect + * second line : ContinuousSerialClock + * third line: SerialData + * + * SYMMETRICAL APPROACH: + * _______________________ LEFT + * _| RIGHT |______________________| + * _ _ _ _ _ _ _ _ + * _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_ + * _ _ _ _ _ _ _ _ + * _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_ + * \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ + * + * ACCURATE CLOCK APPROACH: + * ______________ LEFT + * _| RIGHT |_______________________________| + * _ _ _ _ _ _ _ _ _ + * _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| | + * _ _ _ _ dummy cycles + * _/ \_ ... _/ \_/ \_ ... _/ \__________________ + * \_/ \_/ \_/ \_/ + * + */ + bool i2s_accurate_sck; + + /* McASP specific fields */ + int tdm_slots; + u8 op_mode; + u8 num_serializer; + u8 *serial_dir; + u8 version; + u8 txnumevt; + u8 rxnumevt; +}; + +enum { + MCASP_VERSION_1 = 0, /* DM646x */ + MCASP_VERSION_2, /* DA8xx/OMAPL1x */ + MCASP_VERSION_3, /* TI81xx/AM33xx */ +}; + +enum mcbsp_clk_input_pin { + MCBSP_CLKR = 0, /* as in DM365 */ + MCBSP_CLKS, +}; + +#define INACTIVE_MODE 0 +#define TX_MODE 1 +#define RX_MODE 2 + +#define DAVINCI_MCASP_IIS_MODE 0 +#define DAVINCI_MCASP_DIT_MODE 1 + +#endif diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos_thermal.h index 39e038cca59..a7bdb2f63b7 100644 --- a/include/linux/platform_data/exynos4_tmu.h +++ b/include/linux/platform_data/exynos_thermal.h @@ -1,5 +1,5 @@ /* - * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit) + * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit) * * Copyright (C) 2011 Samsung Electronics * Donggeun Kim <dg77.kim@samsung.com> @@ -19,8 +19,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _LINUX_EXYNOS4_TMU_H -#define _LINUX_EXYNOS4_TMU_H +#ifndef _LINUX_EXYNOS_THERMAL_H +#define _LINUX_EXYNOS_THERMAL_H +#include <linux/cpu_cooling.h> enum calibration_type { TYPE_ONE_POINT_TRIMMING, @@ -28,8 +29,28 @@ enum calibration_type { TYPE_NONE, }; +enum soc_type { + SOC_ARCH_EXYNOS4210 = 1, + SOC_ARCH_EXYNOS, +}; +/** + * struct freq_clip_table + * @freq_clip_max: maximum frequency allowed for this cooling state. + * @temp_level: Temperature level at which the temperature clipping will + * happen. + * @mask_val: cpumask of the allowed cpu's where the clipping will take place. + * + * This structure is required to be filled and passed to the + * cpufreq_cooling_unregister function. + */ +struct freq_clip_table { + unsigned int freq_clip_max; + unsigned int temp_level; + const struct cpumask *mask_val; +}; + /** - * struct exynos4_tmu_platform_data + * struct exynos_tmu_platform_data * @threshold: basic temperature for generating interrupt * 25 <= threshold <= 125 [unit: degree Celsius] * @trigger_levels: array for each interrupt levels @@ -63,11 +84,18 @@ enum calibration_type { * @reference_voltage: reference voltage of amplifier * in the positive-TC generator block * 0 <= reference_voltage <= 31 + * @noise_cancel_mode: noise cancellation mode + * 000, 100, 101, 110 and 111 can be different modes + * @type: determines the type of SOC + * @efuse_value: platform defined fuse value * @cal_type: calibration type for temperature + * @freq_clip_table: Table representing frequency reduction percentage. + * @freq_tab_count: Count of the above table as frequency reduction may + * applicable to only some of the trigger levels. * - * This structure is required for configuration of exynos4_tmu driver. + * This structure is required for configuration of exynos_tmu driver. */ -struct exynos4_tmu_platform_data { +struct exynos_tmu_platform_data { u8 threshold; u8 trigger_levels[4]; bool trigger_level0_en; @@ -77,7 +105,12 @@ struct exynos4_tmu_platform_data { u8 gain; u8 reference_voltage; + u8 noise_cancel_mode; + u32 efuse_value; enum calibration_type cal_type; + enum soc_type type; + struct freq_clip_table freq_tab[4]; + unsigned int freq_tab_count; }; -#endif /* _LINUX_EXYNOS4_TMU_H */ +#endif /* _LINUX_EXYNOS_THERMAL_H */ diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h index c2303c3e480..3a8be9cdc95 100644 --- a/include/linux/platform_data/i2c-nomadik.h +++ b/include/linux/platform_data/i2c-nomadik.h @@ -28,7 +28,7 @@ enum i2c_freq_mode { * @sm: speed mode */ struct nmk_i2c_controller { - unsigned long clk_freq; + u32 clk_freq; unsigned short slsu; unsigned char tft; unsigned char rft; diff --git a/include/linux/platform_data/leds-lm3556.h b/include/linux/platform_data/leds-lm3556.h deleted file mode 100644 index 4b4e7d6b052..00000000000 --- a/include/linux/platform_data/leds-lm3556.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03) - * Copyright (C) 2012 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __LINUX_LM3556_H -#define __LINUX_LM3556_H - -#define LM3556_NAME "leds-lm3556" - -enum lm3556_pin_polarity { - PIN_LOW_ACTIVE = 0, - PIN_HIGH_ACTIVE, -}; - -enum lm3556_pin_enable { - PIN_DISABLED = 0, - PIN_ENABLED, -}; - -enum lm3556_strobe_usuage { - STROBE_EDGE_DETECT = 0, - STROBE_LEVEL_DETECT, -}; - -enum lm3556_indic_mode { - INDIC_MODE_INTERNAL = 0, - INDIC_MODE_EXTERNAL, -}; - -struct lm3556_platform_data { - enum lm3556_pin_enable torch_pin_en; - enum lm3556_pin_polarity torch_pin_polarity; - - enum lm3556_strobe_usuage strobe_usuage; - enum lm3556_pin_enable strobe_pin_en; - enum lm3556_pin_polarity strobe_pin_polarity; - - enum lm3556_pin_enable tx_pin_en; - enum lm3556_pin_polarity tx_pin_polarity; - - enum lm3556_indic_mode indicator_mode; -}; - -#endif /* __LINUX_LM3556_H */ diff --git a/include/linux/platform_data/leds-lm355x.h b/include/linux/platform_data/leds-lm355x.h new file mode 100644 index 00000000000..b88724bb0b4 --- /dev/null +++ b/include/linux/platform_data/leds-lm355x.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Texas Instruments + * + * License Terms: GNU General Public License v2 + * + * Simple driver for Texas Instruments LM355x LED driver chip + * + * Author: G.Shark Jeong <gshark.jeong@gmail.com> + * Daniel Jeong <daniel.jeong@ti.com> + */ + +#define LM355x_NAME "leds-lm355x" +#define LM3554_NAME "leds-lm3554" +#define LM3556_NAME "leds-lm3556" + +/* lm3554 : strobe def. on */ +enum lm355x_strobe { + LM355x_PIN_STROBE_DISABLE = 0x00, + LM355x_PIN_STROBE_ENABLE = 0x01, +}; + +enum lm355x_torch { + LM355x_PIN_TORCH_DISABLE = 0, + LM3554_PIN_TORCH_ENABLE = 0x80, + LM3556_PIN_TORCH_ENABLE = 0x10, +}; + +enum lm355x_tx2 { + LM355x_PIN_TX_DISABLE = 0, + LM3554_PIN_TX_ENABLE = 0x20, + LM3556_PIN_TX_ENABLE = 0x40, +}; + +enum lm355x_ntc { + LM355x_PIN_NTC_DISABLE = 0, + LM3554_PIN_NTC_ENABLE = 0x08, + LM3556_PIN_NTC_ENABLE = 0x80, +}; + +enum lm355x_pmode { + LM355x_PMODE_DISABLE = 0, + LM355x_PMODE_ENABLE = 0x04, +}; + +/* + * struct lm3554_platform_data + * @pin_strobe: strobe input + * @pin_torch : input pin + * lm3554-tx1/torch/gpio1 + * lm3556-torch + * @pin_tx2 : input pin + * lm3554-envm/tx2/gpio2 + * lm3556-tx pin + * @ntc_pin : output pin + * lm3554-ledi/ntc + * lm3556-temp pin + * @pass_mode : pass mode + */ +struct lm355x_platform_data { + enum lm355x_strobe pin_strobe; + enum lm355x_torch pin_tx1; + enum lm355x_tx2 pin_tx2; + enum lm355x_ntc ntc_pin; + + enum lm355x_pmode pass_mode; +}; diff --git a/include/linux/platform_data/leds-lm3642.h b/include/linux/platform_data/leds-lm3642.h new file mode 100644 index 00000000000..72d6ee6ade5 --- /dev/null +++ b/include/linux/platform_data/leds-lm3642.h @@ -0,0 +1,38 @@ +/* +* Copyright (C) 2012 Texas Instruments +* +* License Terms: GNU General Public License v2 +* +* Simple driver for Texas Instruments LM3642 LED driver chip +* +* Author: G.Shark Jeong <gshark.jeong@gmail.com> +* Daniel Jeong <daniel.jeong@ti.com> +*/ + +#ifndef __LINUX_LM3642_H +#define __LINUX_LM3642_H + +#define LM3642_NAME "leds-lm3642" + +enum lm3642_torch_pin_enable { + LM3642_TORCH_PIN_DISABLE = 0x00, + LM3642_TORCH_PIN_ENABLE = 0x10, +}; + +enum lm3642_strobe_pin_enable { + LM3642_STROBE_PIN_DISABLE = 0x00, + LM3642_STROBE_PIN_ENABLE = 0x20, +}; + +enum lm3642_tx_pin_enable { + LM3642_TX_PIN_DISABLE = 0x00, + LM3642_TX_PIN_ENABLE = 0x40, +}; + +struct lm3642_platform_data { + enum lm3642_torch_pin_enable torch_pin; + enum lm3642_strobe_pin_enable strobe_pin; + enum lm3642_tx_pin_enable tx_pin; +}; + +#endif /* __LINUX_LM3642_H */ diff --git a/include/linux/platform_data/leds-pca9633.h b/include/linux/platform_data/leds-pca9633.h new file mode 100644 index 00000000000..c5bf29b6fa7 --- /dev/null +++ b/include/linux/platform_data/leds-pca9633.h @@ -0,0 +1,35 @@ +/* + * PCA9633 LED chip driver. + * + * Copyright 2012 bct electronic GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_PCA9633_H +#define __LINUX_PCA9633_H +#include <linux/leds.h> + +enum pca9633_outdrv { + PCA9633_OPEN_DRAIN, + PCA9633_TOTEM_POLE, /* aka push-pull */ +}; + +struct pca9633_platform_data { + struct led_platform_data leds; + enum pca9633_outdrv outdrv; +}; + +#endif /* __LINUX_PCA9633_H*/ diff --git a/include/linux/platform_data/lm3630_bl.h b/include/linux/platform_data/lm3630_bl.h new file mode 100644 index 00000000000..9176dd3f2d6 --- /dev/null +++ b/include/linux/platform_data/lm3630_bl.h @@ -0,0 +1,57 @@ +/* +* Simple driver for Texas Instruments LM3630 LED Flash driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +#ifndef __LINUX_LM3630_H +#define __LINUX_LM3630_H + +#define LM3630_NAME "lm3630_bl" + +enum lm3630_pwm_ctrl { + PWM_CTRL_DISABLE = 0, + PWM_CTRL_BANK_A, + PWM_CTRL_BANK_B, + PWM_CTRL_BANK_ALL, +}; + +enum lm3630_pwm_active { + PWM_ACTIVE_HIGH = 0, + PWM_ACTIVE_LOW, +}; + +enum lm3630_bank_a_ctrl { + BANK_A_CTRL_DISABLE = 0x0, + BANK_A_CTRL_LED1 = 0x4, + BANK_A_CTRL_LED2 = 0x1, + BANK_A_CTRL_ALL = 0x5, +}; + +enum lm3630_bank_b_ctrl { + BANK_B_CTRL_DISABLE = 0, + BANK_B_CTRL_LED2, +}; + +struct lm3630_platform_data { + + /* maximum brightness */ + int max_brt_led1; + int max_brt_led2; + + /* initial on brightness */ + int init_brt_led1; + int init_brt_led2; + enum lm3630_pwm_ctrl pwm_ctrl; + enum lm3630_pwm_active pwm_active; + enum lm3630_bank_a_ctrl bank_a_ctrl; + enum lm3630_bank_b_ctrl bank_b_ctrl; + unsigned int pwm_period; + void (*pwm_set_intensity) (int brightness, int max_brightness); +}; + +#endif /* __LINUX_LM3630_H */ diff --git a/include/linux/platform_data/lm3639_bl.h b/include/linux/platform_data/lm3639_bl.h new file mode 100644 index 00000000000..5234cd5ed16 --- /dev/null +++ b/include/linux/platform_data/lm3639_bl.h @@ -0,0 +1,69 @@ +/* +* Simple driver for Texas Instruments LM3630 LED Flash driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +#ifndef __LINUX_LM3639_H +#define __LINUX_LM3639_H + +#define LM3639_NAME "lm3639_bl" + +enum lm3639_pwm { + LM3639_PWM_DISABLE = 0x00, + LM3639_PWM_EN_ACTLOW = 0x48, + LM3639_PWM_EN_ACTHIGH = 0x40, +}; + +enum lm3639_strobe { + LM3639_STROBE_DISABLE = 0x00, + LM3639_STROBE_EN_ACTLOW = 0x10, + LM3639_STROBE_EN_ACTHIGH = 0x30, +}; + +enum lm3639_txpin { + LM3639_TXPIN_DISABLE = 0x00, + LM3639_TXPIN_EN_ACTLOW = 0x04, + LM3639_TXPIN_EN_ACTHIGH = 0x0C, +}; + +enum lm3639_fleds { + LM3639_FLED_DIASBLE_ALL = 0x00, + LM3639_FLED_EN_1 = 0x40, + LM3639_FLED_EN_2 = 0x20, + LM3639_FLED_EN_ALL = 0x60, +}; + +enum lm3639_bleds { + LM3639_BLED_DIASBLE_ALL = 0x00, + LM3639_BLED_EN_1 = 0x10, + LM3639_BLED_EN_2 = 0x08, + LM3639_BLED_EN_ALL = 0x18, +}; +enum lm3639_bled_mode { + LM3639_BLED_MODE_EXPONETIAL = 0x00, + LM3639_BLED_MODE_LINEAR = 0x10, +}; + +struct lm3639_platform_data { + unsigned int max_brt_led; + unsigned int init_brt_led; + + /* input pins */ + enum lm3639_pwm pin_pwm; + enum lm3639_strobe pin_strobe; + enum lm3639_txpin pin_tx; + + /* output pins */ + enum lm3639_fleds fled_pins; + enum lm3639_bleds bled_pins; + enum lm3639_bled_mode bled_mode; + + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (void); +}; +#endif /* __LINUX_LM3639_H */ diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index cc76f1f18f1..761f3175236 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -46,6 +46,8 @@ #define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ (LP8556_I2C_ONLY << BRT_MODE_SHFT)) #define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) +#define LP8556_FAST_CONFIG BIT(7) /* use it if EPROMs should be maintained + when exiting the low power mode */ enum lp855x_chip_id { LP8550, diff --git a/include/linux/platform_data/lp8727.h b/include/linux/platform_data/lp8727.h index ea98c6133d3..47128a50e04 100644 --- a/include/linux/platform_data/lp8727.h +++ b/include/linux/platform_data/lp8727.h @@ -13,32 +13,32 @@ #define _LP8727_H enum lp8727_eoc_level { - EOC_5P, - EOC_10P, - EOC_16P, - EOC_20P, - EOC_25P, - EOC_33P, - EOC_50P, + LP8727_EOC_5P, + LP8727_EOC_10P, + LP8727_EOC_16P, + LP8727_EOC_20P, + LP8727_EOC_25P, + LP8727_EOC_33P, + LP8727_EOC_50P, }; enum lp8727_ichg { - ICHG_90mA, - ICHG_100mA, - ICHG_400mA, - ICHG_450mA, - ICHG_500mA, - ICHG_600mA, - ICHG_700mA, - ICHG_800mA, - ICHG_900mA, - ICHG_1000mA, + LP8727_ICHG_90mA, + LP8727_ICHG_100mA, + LP8727_ICHG_400mA, + LP8727_ICHG_450mA, + LP8727_ICHG_500mA, + LP8727_ICHG_600mA, + LP8727_ICHG_700mA, + LP8727_ICHG_800mA, + LP8727_ICHG_900mA, + LP8727_ICHG_1000mA, }; /** * struct lp8727_chg_param * @eoc_level : end of charge level setting - * @ichg : charging current + * @ichg : charging current */ struct lp8727_chg_param { enum lp8727_eoc_level eoc_level; @@ -47,19 +47,22 @@ struct lp8727_chg_param { /** * struct lp8727_platform_data - * @get_batt_present : check battery status - exists or not - * @get_batt_level : get battery voltage (mV) + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) * @get_batt_capacity : get battery capacity (%) - * @get_batt_temp : get battery temperature - * @ac, @usb : charging parameters each charger type + * @get_batt_temp : get battery temperature + * @ac : charging parameters for AC type charger + * @usb : charging parameters for USB type charger + * @debounce_msec : interrupt debounce time */ struct lp8727_platform_data { u8 (*get_batt_present)(void); u16 (*get_batt_level)(void); u8 (*get_batt_capacity)(void); u8 (*get_batt_temp)(void); - struct lp8727_chg_param ac; - struct lp8727_chg_param usb; + struct lp8727_chg_param *ac; + struct lp8727_chg_param *usb; + unsigned int debounce_msec; }; #endif diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h index c45b1e8d4c2..bf34e17cee7 100644 --- a/include/linux/platform_data/mipi-csis.h +++ b/include/linux/platform_data/mipi-csis.h @@ -1,7 +1,7 @@ /* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. + * Copyright (C) 2010 - 2012 Samsung Electronics Co., Ltd. * - * S5P series MIPI CSI slave device support + * Samsung S5P/Exynos SoC series MIPI CSIS device support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,33 +11,27 @@ #ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_ #define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__ -struct platform_device; - /** * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver - * @clk_rate: bus clock frequency - * @lanes: number of data lanes used - * @alignment: data alignment in bits - * @hs_settle: HS-RX settle time - * @fixed_phy_vdd: false to enable external D-PHY regulator management in the - * driver or true in case this regulator has no enable function - * @phy_enable: pointer to a callback controlling D-PHY enable/reset + * @clk_rate: bus clock frequency + * @wclk_source: CSI wrapper clock selection: 0 - bus clock, 1 - ext. SCLK_CAM + * @lanes: number of data lanes used + * @hs_settle: HS-RX settle time */ struct s5p_platform_mipi_csis { unsigned long clk_rate; + u8 wclk_source; u8 lanes; - u8 alignment; u8 hs_settle; - bool fixed_phy_vdd; - int (*phy_enable)(struct platform_device *pdev, bool on); }; /** * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control - * @pdev: MIPI-CSIS platform device - * @on: true to enable D-PHY and deassert its reset - * false to disable D-PHY + * @id: MIPI-CSIS harware instance index (0...1) + * @on: true to enable D-PHY and deassert its reset + * false to disable D-PHY + * @return: 0 on success, or negative error code on failure */ -int s5p_csis_phy_enable(struct platform_device *pdev, bool on); +int s5p_csis_phy_enable(int id, bool on); #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h new file mode 100644 index 00000000000..2a330ec9e2a --- /dev/null +++ b/include/linux/platform_data/mmp_dma.h @@ -0,0 +1,19 @@ +/* + * MMP Platform DMA Management + * + * Copyright (c) 2011 Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef MMP_DMA_H +#define MMP_DMA_H + +struct mmp_dma_platdata { + int dma_channels; +}; + +#endif /* MMP_DMA_H */ diff --git a/include/linux/platform_data/omap-twl4030.h b/include/linux/platform_data/omap-twl4030.h new file mode 100644 index 00000000000..c7bef788daa --- /dev/null +++ b/include/linux/platform_data/omap-twl4030.h @@ -0,0 +1,32 @@ +/** + * omap-twl4030.h - ASoC machine driver for TI SoC based boards with twl4030 + * codec, header. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _OMAP_TWL4030_H_ +#define _OMAP_TWL4030_H_ + +struct omap_tw4030_pdata { + const char *card_name; +}; + +#endif /* _OMAP_TWL4030_H_ */ diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h index 51ad0995aba..59acd987ed3 100644 --- a/include/linux/platform_data/pxa_sdhci.h +++ b/include/linux/platform_data/pxa_sdhci.h @@ -49,6 +49,7 @@ struct sdhci_pxa_platdata { bool ext_cd_gpio_invert; unsigned int max_speed; unsigned int host_caps; + unsigned int host_caps2; unsigned int quirks; unsigned int pm_caps; }; |