diff options
Diffstat (limited to 'include/linux/platform_data')
39 files changed, 1783 insertions, 84 deletions
diff --git a/include/linux/platform_data/ad5755.h b/include/linux/platform_data/ad5755.h new file mode 100644 index 00000000000..a5a1cb75187 --- /dev/null +++ b/include/linux/platform_data/ad5755.h @@ -0,0 +1,103 @@ +/* + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD5755_H__ +#define __LINUX_PLATFORM_DATA_AD5755_H__ + +enum ad5755_mode { + AD5755_MODE_VOLTAGE_0V_5V = 0, + AD5755_MODE_VOLTAGE_0V_10V = 1, + AD5755_MODE_VOLTAGE_PLUSMINUS_5V = 2, + AD5755_MODE_VOLTAGE_PLUSMINUS_10V = 3, + AD5755_MODE_CURRENT_4mA_20mA = 4, + AD5755_MODE_CURRENT_0mA_20mA = 5, + AD5755_MODE_CURRENT_0mA_24mA = 6, +}; + +enum ad5755_dc_dc_phase { + AD5755_DC_DC_PHASE_ALL_SAME_EDGE = 0, + AD5755_DC_DC_PHASE_A_B_SAME_EDGE_C_D_OPP_EDGE = 1, + AD5755_DC_DC_PHASE_A_C_SAME_EDGE_B_D_OPP_EDGE = 2, + AD5755_DC_DC_PHASE_90_DEGREE = 3, +}; + +enum ad5755_dc_dc_freq { + AD5755_DC_DC_FREQ_250kHZ = 0, + AD5755_DC_DC_FREQ_410kHZ = 1, + AD5755_DC_DC_FREQ_650kHZ = 2, +}; + +enum ad5755_dc_dc_maxv { + AD5755_DC_DC_MAXV_23V = 0, + AD5755_DC_DC_MAXV_24V5 = 1, + AD5755_DC_DC_MAXV_27V = 2, + AD5755_DC_DC_MAXV_29V5 = 3, +}; + +enum ad5755_slew_rate { + AD5755_SLEW_RATE_64k = 0, + AD5755_SLEW_RATE_32k = 1, + AD5755_SLEW_RATE_16k = 2, + AD5755_SLEW_RATE_8k = 3, + AD5755_SLEW_RATE_4k = 4, + AD5755_SLEW_RATE_2k = 5, + AD5755_SLEW_RATE_1k = 6, + AD5755_SLEW_RATE_500 = 7, + AD5755_SLEW_RATE_250 = 8, + AD5755_SLEW_RATE_125 = 9, + AD5755_SLEW_RATE_64 = 10, + AD5755_SLEW_RATE_32 = 11, + AD5755_SLEW_RATE_16 = 12, + AD5755_SLEW_RATE_8 = 13, + AD5755_SLEW_RATE_4 = 14, + AD5755_SLEW_RATE_0_5 = 15, +}; + +enum ad5755_slew_step_size { + AD5755_SLEW_STEP_SIZE_1 = 0, + AD5755_SLEW_STEP_SIZE_2 = 1, + AD5755_SLEW_STEP_SIZE_4 = 2, + AD5755_SLEW_STEP_SIZE_8 = 3, + AD5755_SLEW_STEP_SIZE_16 = 4, + AD5755_SLEW_STEP_SIZE_32 = 5, + AD5755_SLEW_STEP_SIZE_64 = 6, + AD5755_SLEW_STEP_SIZE_128 = 7, + AD5755_SLEW_STEP_SIZE_256 = 8, +}; + +/** + * struct ad5755_platform_data - AD5755 DAC driver platform data + * @ext_dc_dc_compenstation_resistor: Whether an external DC-DC converter + * compensation register is used. + * @dc_dc_phase: DC-DC converter phase. + * @dc_dc_freq: DC-DC converter frequency. + * @dc_dc_maxv: DC-DC maximum allowed boost voltage. + * @dac.mode: The mode to be used for the DAC output. + * @dac.ext_current_sense_resistor: Whether an external current sense resistor + * is used. + * @dac.enable_voltage_overrange: Whether to enable 20% voltage output overrange. + * @dac.slew.enable: Whether to enable digital slew. + * @dac.slew.rate: Slew rate of the digital slew. + * @dac.slew.step_size: Slew step size of the digital slew. + **/ +struct ad5755_platform_data { + bool ext_dc_dc_compenstation_resistor; + enum ad5755_dc_dc_phase dc_dc_phase; + enum ad5755_dc_dc_freq dc_dc_freq; + enum ad5755_dc_dc_maxv dc_dc_maxv; + + struct { + enum ad5755_mode mode; + bool ext_current_sense_resistor; + bool enable_voltage_overrange; + struct { + bool enable; + enum ad5755_slew_rate rate; + enum ad5755_slew_step_size step_size; + } slew; + } dac[4]; +}; + +#endif diff --git a/include/linux/platform_data/ad7791.h b/include/linux/platform_data/ad7791.h new file mode 100644 index 00000000000..f9e4db1b82a --- /dev/null +++ b/include/linux/platform_data/ad7791.h @@ -0,0 +1,17 @@ +#ifndef __LINUX_PLATFORM_DATA_AD7791__ +#define __LINUX_PLATFORM_DATA_AD7791__ + +/** + * struct ad7791_platform_data - AD7791 device platform data + * @buffered: If set to true configure the device for buffered input mode. + * @burnout_current: If set to true the 100mA burnout current is enabled. + * @unipolar: If set to true sample in unipolar mode, if set to false sample in + * bipolar mode. + */ +struct ad7791_platform_data { + bool buffered; + bool burnout_current; + bool unipolar; +}; + +#endif diff --git a/include/linux/platform_data/asoc-mx27vis.h b/include/linux/platform_data/asoc-mx27vis.h new file mode 100644 index 00000000000..409adcd04d0 --- /dev/null +++ b/include/linux/platform_data/asoc-mx27vis.h @@ -0,0 +1,11 @@ +#ifndef __PLATFORM_DATA_ASOC_MX27VIS_H +#define __PLATFORM_DATA_ASOC_MX27VIS_H + +struct snd_mx27vis_platform_data { + int amp_gain0_gpio; + int amp_gain1_gpio; + int amp_mutel_gpio; + int amp_muter_gpio; +}; + +#endif /* __PLATFORM_DATA_ASOC_MX27VIS_H */ diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h new file mode 100644 index 00000000000..c78d90b28b1 --- /dev/null +++ b/include/linux/platform_data/asoc-ti-mcbsp.h @@ -0,0 +1,60 @@ +/* + * arch/arm/plat-omap/include/mach/mcbsp.h + * + * Defines for Multi-Channel Buffered Serial Port + * + * Copyright (C) 2002 RidgeRun, Inc. + * Author: Steve Johnson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_OMAP_MCBSP_H +#define __ASM_ARCH_OMAP_MCBSP_H + +#include <linux/spinlock.h> +#include <linux/clk.h> + +#define MCBSP_CONFIG_TYPE2 0x2 +#define MCBSP_CONFIG_TYPE3 0x3 +#define MCBSP_CONFIG_TYPE4 0x4 + +/* Platform specific configuration */ +struct omap_mcbsp_ops { + void (*request)(unsigned int); + void (*free)(unsigned int); +}; + +struct omap_mcbsp_platform_data { + struct omap_mcbsp_ops *ops; + u16 buffer_size; + u8 reg_size; + u8 reg_step; + + /* McBSP platform and instance specific features */ + bool has_wakeup; /* Wakeup capability */ + bool has_ccr; /* Transceiver has configuration control registers */ + int (*enable_st_clock)(unsigned int, bool); +}; + +/** + * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod + * @sidetone: name of the sidetone device + */ +struct omap_mcbsp_dev_attr { + const char *sidetone; +}; + +#endif diff --git a/include/linux/platform_data/camera-mx2.h b/include/linux/platform_data/camera-mx2.h index 3c080a32dbf..7ded6f1f74b 100644 --- a/include/linux/platform_data/camera-mx2.h +++ b/include/linux/platform_data/camera-mx2.h @@ -23,7 +23,6 @@ #ifndef __MACH_MX2_CAM_H_ #define __MACH_MX2_CAM_H_ -#define MX2_CAMERA_SWAP16 (1 << 0) #define MX2_CAMERA_EXT_VSYNC (1 << 1) #define MX2_CAMERA_CCIR (1 << 2) #define MX2_CAMERA_CCIR_INTERLACE (1 << 3) @@ -31,7 +30,6 @@ #define MX2_CAMERA_GATED_CLOCK (1 << 5) #define MX2_CAMERA_INV_DATA (1 << 6) #define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) -#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) /** * struct mx2_camera_platform_data - optional platform data for mx2_camera diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h new file mode 100644 index 00000000000..2e426a7dbc5 --- /dev/null +++ b/include/linux/platform_data/clk-realview.h @@ -0,0 +1 @@ +void realview_clk_init(void __iomem *sysbase, bool is_pb1176); diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h new file mode 100644 index 00000000000..3af0da1f3be --- /dev/null +++ b/include/linux/platform_data/clk-ux500.h @@ -0,0 +1,17 @@ +/* + * Clock definitions for ux500 platforms + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __CLK_UX500_H +#define __CLK_UX500_H + +void u8500_clk_init(void); +void u9540_clk_init(void); +void u8540_clk_init(void); + +#endif /* __CLK_UX500_H */ diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h new file mode 100644 index 00000000000..d0c5825876f --- /dev/null +++ b/include/linux/platform_data/davinci_asp.h @@ -0,0 +1,105 @@ +/* + * TI DaVinci Audio Serial Port support + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DAVINCI_ASP_H +#define __DAVINCI_ASP_H + +struct snd_platform_data { + u32 tx_dma_offset; + u32 rx_dma_offset; + int asp_chan_q; /* event queue number for ASP channel */ + int ram_chan_q; /* event queue number for RAM channel */ + unsigned int codec_fmt; + /* + * Allowing this is more efficient and eliminates left and right swaps + * caused by underruns, but will swap the left and right channels + * when compared to previous behavior. + */ + unsigned enable_channel_combine:1; + unsigned sram_size_playback; + unsigned sram_size_capture; + + /* + * If McBSP peripheral gets the clock from an external pin, + * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR + * and MCBSP_CLKS. + * Depending on different hardware connections it is possible + * to use this setting to change the behaviour of McBSP + * driver. + */ + int clk_input_pin; + + /* + * This flag works when both clock and FS are outputs for the cpu + * and makes clock more accurate (FS is not symmetrical and the + * clock is very fast. + * The clock becoming faster is named + * i2s continuous serial clock (I2S_SCK) and it is an externally + * visible bit clock. + * + * first line : WordSelect + * second line : ContinuousSerialClock + * third line: SerialData + * + * SYMMETRICAL APPROACH: + * _______________________ LEFT + * _| RIGHT |______________________| + * _ _ _ _ _ _ _ _ + * _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_ + * _ _ _ _ _ _ _ _ + * _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_ + * \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ + * + * ACCURATE CLOCK APPROACH: + * ______________ LEFT + * _| RIGHT |_______________________________| + * _ _ _ _ _ _ _ _ _ + * _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| | + * _ _ _ _ dummy cycles + * _/ \_ ... _/ \_/ \_ ... _/ \__________________ + * \_/ \_/ \_/ \_/ + * + */ + bool i2s_accurate_sck; + + /* McASP specific fields */ + int tdm_slots; + u8 op_mode; + u8 num_serializer; + u8 *serial_dir; + u8 version; + u8 txnumevt; + u8 rxnumevt; +}; + +enum { + MCASP_VERSION_1 = 0, /* DM646x */ + MCASP_VERSION_2, /* DA8xx/OMAPL1x */ + MCASP_VERSION_3, /* TI81xx/AM33xx */ +}; + +enum mcbsp_clk_input_pin { + MCBSP_CLKR = 0, /* as in DM365 */ + MCBSP_CLKS, +}; + +#define INACTIVE_MODE 0 +#define TX_MODE 1 +#define RX_MODE 2 + +#define DAVINCI_MCASP_IIS_MODE 0 +#define DAVINCI_MCASP_DIT_MODE 1 + +#endif diff --git a/include/linux/platform_data/dsp-omap.h b/include/linux/platform_data/dsp-omap.h new file mode 100644 index 00000000000..5927709b190 --- /dev/null +++ b/include/linux/platform_data/dsp-omap.h @@ -0,0 +1,34 @@ +#ifndef __OMAP_DSP_H__ +#define __OMAP_DSP_H__ + +#include <linux/types.h> + +struct omap_dsp_platform_data { + void (*dsp_set_min_opp) (u8 opp_id); + u8 (*dsp_get_opp) (void); + void (*cpu_set_freq) (unsigned long f); + unsigned long (*cpu_get_freq) (void); + unsigned long mpu_speed[6]; + + /* functions to write and read PRCM registers */ + void (*dsp_prm_write)(u32, s16 , u16); + u32 (*dsp_prm_read)(s16 , u16); + u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16); + void (*dsp_cm_write)(u32, s16 , u16); + u32 (*dsp_cm_read)(s16 , u16); + u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16); + + void (*set_bootaddr)(u32); + void (*set_bootmode)(u8); + + phys_addr_t phys_mempool_base; + phys_addr_t phys_mempool_size; +}; + +#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) +extern void omap_dsp_reserve_sdram_memblock(void); +#else +static inline void omap_dsp_reserve_sdram_memblock(void) { } +#endif + +#endif diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos_thermal.h index 39e038cca59..a7bdb2f63b7 100644 --- a/include/linux/platform_data/exynos4_tmu.h +++ b/include/linux/platform_data/exynos_thermal.h @@ -1,5 +1,5 @@ /* - * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit) + * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit) * * Copyright (C) 2011 Samsung Electronics * Donggeun Kim <dg77.kim@samsung.com> @@ -19,8 +19,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _LINUX_EXYNOS4_TMU_H -#define _LINUX_EXYNOS4_TMU_H +#ifndef _LINUX_EXYNOS_THERMAL_H +#define _LINUX_EXYNOS_THERMAL_H +#include <linux/cpu_cooling.h> enum calibration_type { TYPE_ONE_POINT_TRIMMING, @@ -28,8 +29,28 @@ enum calibration_type { TYPE_NONE, }; +enum soc_type { + SOC_ARCH_EXYNOS4210 = 1, + SOC_ARCH_EXYNOS, +}; +/** + * struct freq_clip_table + * @freq_clip_max: maximum frequency allowed for this cooling state. + * @temp_level: Temperature level at which the temperature clipping will + * happen. + * @mask_val: cpumask of the allowed cpu's where the clipping will take place. + * + * This structure is required to be filled and passed to the + * cpufreq_cooling_unregister function. + */ +struct freq_clip_table { + unsigned int freq_clip_max; + unsigned int temp_level; + const struct cpumask *mask_val; +}; + /** - * struct exynos4_tmu_platform_data + * struct exynos_tmu_platform_data * @threshold: basic temperature for generating interrupt * 25 <= threshold <= 125 [unit: degree Celsius] * @trigger_levels: array for each interrupt levels @@ -63,11 +84,18 @@ enum calibration_type { * @reference_voltage: reference voltage of amplifier * in the positive-TC generator block * 0 <= reference_voltage <= 31 + * @noise_cancel_mode: noise cancellation mode + * 000, 100, 101, 110 and 111 can be different modes + * @type: determines the type of SOC + * @efuse_value: platform defined fuse value * @cal_type: calibration type for temperature + * @freq_clip_table: Table representing frequency reduction percentage. + * @freq_tab_count: Count of the above table as frequency reduction may + * applicable to only some of the trigger levels. * - * This structure is required for configuration of exynos4_tmu driver. + * This structure is required for configuration of exynos_tmu driver. */ -struct exynos4_tmu_platform_data { +struct exynos_tmu_platform_data { u8 threshold; u8 trigger_levels[4]; bool trigger_level0_en; @@ -77,7 +105,12 @@ struct exynos4_tmu_platform_data { u8 gain; u8 reference_voltage; + u8 noise_cancel_mode; + u32 efuse_value; enum calibration_type cal_type; + enum soc_type type; + struct freq_clip_table freq_tab[4]; + unsigned int freq_tab_count; }; -#endif /* _LINUX_EXYNOS4_TMU_H */ +#endif /* _LINUX_EXYNOS_THERMAL_H */ diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h new file mode 100644 index 00000000000..e8741c2678d --- /dev/null +++ b/include/linux/platform_data/gpio-omap.h @@ -0,0 +1,217 @@ +/* + * OMAP GPIO handling defines and functions + * + * Copyright (C) 2003-2005 Nokia Corporation + * + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_GPIO_H +#define __ASM_ARCH_OMAP_GPIO_H + +#include <linux/io.h> +#include <linux/platform_device.h> +#include <mach/irqs.h> + +#define OMAP1_MPUIO_BASE 0xfffb5000 + +/* + * These are the omap15xx/16xx offsets. The omap7xx offset are + * OMAP_MPUIO_ / 2 offsets below. + */ +#define OMAP_MPUIO_INPUT_LATCH 0x00 +#define OMAP_MPUIO_OUTPUT 0x04 +#define OMAP_MPUIO_IO_CNTL 0x08 +#define OMAP_MPUIO_KBR_LATCH 0x10 +#define OMAP_MPUIO_KBC 0x14 +#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 +#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c +#define OMAP_MPUIO_KBD_INT 0x20 +#define OMAP_MPUIO_GPIO_INT 0x24 +#define OMAP_MPUIO_KBD_MASKIT 0x28 +#define OMAP_MPUIO_GPIO_MASKIT 0x2c +#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 +#define OMAP_MPUIO_LATCH 0x34 + +#define OMAP34XX_NR_GPIOS 6 + +/* + * OMAP1510 GPIO registers + */ +#define OMAP1510_GPIO_DATA_INPUT 0x00 +#define OMAP1510_GPIO_DATA_OUTPUT 0x04 +#define OMAP1510_GPIO_DIR_CONTROL 0x08 +#define OMAP1510_GPIO_INT_CONTROL 0x0c +#define OMAP1510_GPIO_INT_MASK 0x10 +#define OMAP1510_GPIO_INT_STATUS 0x14 +#define OMAP1510_GPIO_PIN_CONTROL 0x18 + +#define OMAP1510_IH_GPIO_BASE 64 + +/* + * OMAP1610 specific GPIO registers + */ +#define OMAP1610_GPIO_REVISION 0x0000 +#define OMAP1610_GPIO_SYSCONFIG 0x0010 +#define OMAP1610_GPIO_SYSSTATUS 0x0014 +#define OMAP1610_GPIO_IRQSTATUS1 0x0018 +#define OMAP1610_GPIO_IRQENABLE1 0x001c +#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 +#define OMAP1610_GPIO_DATAIN 0x002c +#define OMAP1610_GPIO_DATAOUT 0x0030 +#define OMAP1610_GPIO_DIRECTION 0x0034 +#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 +#define OMAP1610_GPIO_EDGE_CTRL2 0x003c +#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c +#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 +#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 +#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc +#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 +#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 + +/* + * OMAP7XX specific GPIO registers + */ +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 + +/* + * omap2+ specific GPIO registers + */ +#define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 +#define OMAP24XX_GPIO_IRQENABLE2 0x002c +#define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_WAKE_EN 0x0020 +#define OMAP24XX_GPIO_CTRL 0x0030 +#define OMAP24XX_GPIO_OE 0x0034 +#define OMAP24XX_GPIO_DATAIN 0x0038 +#define OMAP24XX_GPIO_DATAOUT 0x003c +#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 +#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 +#define OMAP24XX_GPIO_RISINGDETECT 0x0048 +#define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 +#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 +#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 +#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 +#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 +#define OMAP24XX_GPIO_SETWKUENA 0x0084 +#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 +#define OMAP24XX_GPIO_SETDATAOUT 0x0094 + +#define OMAP4_GPIO_REVISION 0x0000 +#define OMAP4_GPIO_EOI 0x0020 +#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 +#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 +#define OMAP4_GPIO_IRQSTATUS0 0x002c +#define OMAP4_GPIO_IRQSTATUS1 0x0030 +#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 +#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 +#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c +#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 +#define OMAP4_GPIO_IRQWAKEN0 0x0044 +#define OMAP4_GPIO_IRQWAKEN1 0x0048 +#define OMAP4_GPIO_IRQENABLE1 0x011c +#define OMAP4_GPIO_WAKE_EN 0x0120 +#define OMAP4_GPIO_IRQSTATUS2 0x0128 +#define OMAP4_GPIO_IRQENABLE2 0x012c +#define OMAP4_GPIO_CTRL 0x0130 +#define OMAP4_GPIO_OE 0x0134 +#define OMAP4_GPIO_DATAIN 0x0138 +#define OMAP4_GPIO_DATAOUT 0x013c +#define OMAP4_GPIO_LEVELDETECT0 0x0140 +#define OMAP4_GPIO_LEVELDETECT1 0x0144 +#define OMAP4_GPIO_RISINGDETECT 0x0148 +#define OMAP4_GPIO_FALLINGDETECT 0x014c +#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 +#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 +#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 +#define OMAP4_GPIO_SETIRQENABLE1 0x0164 +#define OMAP4_GPIO_CLEARWKUENA 0x0180 +#define OMAP4_GPIO_SETWKUENA 0x0184 +#define OMAP4_GPIO_CLEARDATAOUT 0x0190 +#define OMAP4_GPIO_SETDATAOUT 0x0194 + +#define OMAP_MAX_GPIO_LINES 192 + +#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) +#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) + +struct omap_gpio_dev_attr { + int bank_width; /* GPIO bank width */ + bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ +}; + +struct omap_gpio_reg_offs { + u16 revision; + u16 direction; + u16 datain; + u16 dataout; + u16 set_dataout; + u16 clr_dataout; + u16 irqstatus; + u16 irqstatus2; + u16 irqstatus_raw0; + u16 irqstatus_raw1; + u16 irqenable; + u16 irqenable2; + u16 set_irqenable; + u16 clr_irqenable; + u16 debounce; + u16 debounce_en; + u16 ctrl; + u16 wkup_en; + u16 leveldetect0; + u16 leveldetect1; + u16 risingdetect; + u16 fallingdetect; + u16 irqctrl; + u16 edgectrl1; + u16 edgectrl2; + u16 pinctrl; + + bool irqenable_inv; +}; + +struct omap_gpio_platform_data { + int bank_type; + int bank_width; /* GPIO bank width */ + int bank_stride; /* Only needed for omap1 MPUIO */ + bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + bool loses_context; /* whether the bank would ever lose context */ + bool is_mpuio; /* whether the bank is of type MPUIO */ + u32 non_wakeup_gpios; + + struct omap_gpio_reg_offs *regs; + + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); +}; + +extern void omap2_gpio_prepare_for_idle(int off_mode); +extern void omap2_gpio_resume_after_idle(void); +extern void omap_set_gpio_debounce(int gpio, int enable); +extern void omap_set_gpio_debounce_time(int gpio, int enable); + +#endif diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h index c2303c3e480..3a8be9cdc95 100644 --- a/include/linux/platform_data/i2c-nomadik.h +++ b/include/linux/platform_data/i2c-nomadik.h @@ -28,7 +28,7 @@ enum i2c_freq_mode { * @sm: speed mode */ struct nmk_i2c_controller { - unsigned long clk_freq; + u32 clk_freq; unsigned short slsu; unsigned char tft; unsigned char rft; diff --git a/include/linux/platform_data/keyboard-spear.h b/include/linux/platform_data/keyboard-spear.h new file mode 100644 index 00000000000..9248e3a7e33 --- /dev/null +++ b/include/linux/platform_data/keyboard-spear.h @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2010 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_KEYBOARD_H +#define __PLAT_KEYBOARD_H + +#include <linux/bitops.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/types.h> + +#define DECLARE_9x9_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_ESC), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(0, 6, KEY_6), \ + KEY(0, 7, KEY_7), \ + KEY(0, 8, KEY_8), \ + KEY(1, 0, KEY_9), \ + KEY(1, 1, KEY_MINUS), \ + KEY(1, 2, KEY_EQUAL), \ + KEY(1, 3, KEY_BACKSPACE), \ + KEY(1, 4, KEY_TAB), \ + KEY(1, 5, KEY_Q), \ + KEY(1, 6, KEY_W), \ + KEY(1, 7, KEY_E), \ + KEY(1, 8, KEY_R), \ + KEY(2, 0, KEY_T), \ + KEY(2, 1, KEY_Y), \ + KEY(2, 2, KEY_U), \ + KEY(2, 3, KEY_I), \ + KEY(2, 4, KEY_O), \ + KEY(2, 5, KEY_P), \ + KEY(2, 6, KEY_LEFTBRACE), \ + KEY(2, 7, KEY_RIGHTBRACE), \ + KEY(2, 8, KEY_ENTER), \ + KEY(3, 0, KEY_LEFTCTRL), \ + KEY(3, 1, KEY_A), \ + KEY(3, 2, KEY_S), \ + KEY(3, 3, KEY_D), \ + KEY(3, 4, KEY_F), \ + KEY(3, 5, KEY_G), \ + KEY(3, 6, KEY_H), \ + KEY(3, 7, KEY_J), \ + KEY(3, 8, KEY_K), \ + KEY(4, 0, KEY_L), \ + KEY(4, 1, KEY_SEMICOLON), \ + KEY(4, 2, KEY_APOSTROPHE), \ + KEY(4, 3, KEY_GRAVE), \ + KEY(4, 4, KEY_LEFTSHIFT), \ + KEY(4, 5, KEY_BACKSLASH), \ + KEY(4, 6, KEY_Z), \ + KEY(4, 7, KEY_X), \ + KEY(4, 8, KEY_C), \ + KEY(5, 0, KEY_V), \ + KEY(5, 1, KEY_B), \ + KEY(5, 2, KEY_N), \ + KEY(5, 3, KEY_M), \ + KEY(5, 4, KEY_COMMA), \ + KEY(5, 5, KEY_DOT), \ + KEY(5, 6, KEY_SLASH), \ + KEY(5, 7, KEY_RIGHTSHIFT), \ + KEY(5, 8, KEY_KPASTERISK), \ + KEY(6, 0, KEY_LEFTALT), \ + KEY(6, 1, KEY_SPACE), \ + KEY(6, 2, KEY_CAPSLOCK), \ + KEY(6, 3, KEY_F1), \ + KEY(6, 4, KEY_F2), \ + KEY(6, 5, KEY_F3), \ + KEY(6, 6, KEY_F4), \ + KEY(6, 7, KEY_F5), \ + KEY(6, 8, KEY_F6), \ + KEY(7, 0, KEY_F7), \ + KEY(7, 1, KEY_F8), \ + KEY(7, 2, KEY_F9), \ + KEY(7, 3, KEY_F10), \ + KEY(7, 4, KEY_NUMLOCK), \ + KEY(7, 5, KEY_SCROLLLOCK), \ + KEY(7, 6, KEY_KP7), \ + KEY(7, 7, KEY_KP8), \ + KEY(7, 8, KEY_KP9), \ + KEY(8, 0, KEY_KPMINUS), \ + KEY(8, 1, KEY_KP4), \ + KEY(8, 2, KEY_KP5), \ + KEY(8, 3, KEY_KP6), \ + KEY(8, 4, KEY_KPPLUS), \ + KEY(8, 5, KEY_KP1), \ + KEY(8, 6, KEY_KP2), \ + KEY(8, 7, KEY_KP3), \ + KEY(8, 8, KEY_KP0), \ +} + +#define DECLARE_6x6_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_RESERVED), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(1, 0, KEY_Q), \ + KEY(1, 1, KEY_W), \ + KEY(1, 2, KEY_E), \ + KEY(1, 3, KEY_R), \ + KEY(1, 4, KEY_T), \ + KEY(1, 5, KEY_Y), \ + KEY(2, 0, KEY_D), \ + KEY(2, 1, KEY_F), \ + KEY(2, 2, KEY_G), \ + KEY(2, 3, KEY_H), \ + KEY(2, 4, KEY_J), \ + KEY(2, 5, KEY_K), \ + KEY(3, 0, KEY_B), \ + KEY(3, 1, KEY_N), \ + KEY(3, 2, KEY_M), \ + KEY(3, 3, KEY_COMMA), \ + KEY(3, 4, KEY_DOT), \ + KEY(3, 5, KEY_SLASH), \ + KEY(4, 0, KEY_F6), \ + KEY(4, 1, KEY_F7), \ + KEY(4, 2, KEY_F8), \ + KEY(4, 3, KEY_F9), \ + KEY(4, 4, KEY_F10), \ + KEY(4, 5, KEY_NUMLOCK), \ + KEY(5, 0, KEY_KP2), \ + KEY(5, 1, KEY_KP3), \ + KEY(5, 2, KEY_KP0), \ + KEY(5, 3, KEY_KPDOT), \ + KEY(5, 4, KEY_RO), \ + KEY(5, 5, KEY_ZENKAKUHANKAKU), \ +} + +#define KEYPAD_9x9 0 +#define KEYPAD_6x6 1 +#define KEYPAD_2x2 2 + +/** + * struct kbd_platform_data - spear keyboard platform data + * keymap: pointer to keymap data (table and size) + * rep: enables key autorepeat + * mode: choose keyboard support(9x9, 6x6, 2x2) + * suspended_rate: rate at which keyboard would operate in suspended mode + * + * This structure is supposed to be used by platform code to supply + * keymaps to drivers that implement keyboards. + */ +struct kbd_platform_data { + const struct matrix_keymap_data *keymap; + bool rep; + unsigned int mode; + unsigned int suspended_rate; +}; + +#endif /* __PLAT_KEYBOARD_H */ diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h new file mode 100644 index 00000000000..a6b21eddb21 --- /dev/null +++ b/include/linux/platform_data/keypad-omap.h @@ -0,0 +1,52 @@ +/* + * arch/arm/plat-omap/include/mach/keypad.h + * + * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_KEYPAD_H +#define ASMARM_ARCH_KEYPAD_H + +#ifndef CONFIG_ARCH_OMAP1 +#warning Please update the board to use matrix-keypad driver +#define omap_readw(reg) 0 +#define omap_writew(val, reg) do {} while (0) +#endif +#include <linux/input/matrix_keypad.h> + +struct omap_kp_platform_data { + int rows; + int cols; + const struct matrix_keymap_data *keymap_data; + bool rep; + unsigned long delay; + bool dbounce; + /* specific to OMAP242x*/ + unsigned int *row_gpios; + unsigned int *col_gpios; +}; + +/* Group (0..3) -- when multiple keys are pressed, only the + * keys pressed in the same group are considered as pressed. This is + * in order to workaround certain crappy HW designs that produce ghost + * keypresses. Two free bits, not used by neither row/col nor keynum, + * must be available for use as group bits. The below GROUP_SHIFT + * macro definition is based on some prior knowledge of the + * matrix_keypad defined KEY() macro internals. + */ +#define GROUP_SHIFT 14 +#define GROUP_0 (0 << GROUP_SHIFT) +#define GROUP_1 (1 << GROUP_SHIFT) +#define GROUP_2 (2 << GROUP_SHIFT) +#define GROUP_3 (3 << GROUP_SHIFT) +#define GROUP_MASK GROUP_3 +#if KEY_MAX & GROUP_MASK +#error Group bits in conflict with keynum bits +#endif + + +#endif + diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h new file mode 100644 index 00000000000..8e52c657228 --- /dev/null +++ b/include/linux/platform_data/lcd-mipid.h @@ -0,0 +1,29 @@ +#ifndef __LCD_MIPID_H +#define __LCD_MIPID_H + +enum mipid_test_num { + MIPID_TEST_RGB_LINES, +}; + +enum mipid_test_result { + MIPID_TEST_SUCCESS, + MIPID_TEST_INVALID, + MIPID_TEST_FAILED, +}; + +#ifdef __KERNEL__ + +struct mipid_platform_data { + int nreset_gpio; + int data_lines; + + void (*shutdown)(struct mipid_platform_data *pdata); + void (*set_bklight_level)(struct mipid_platform_data *pdata, + int level); + int (*get_bklight_level)(struct mipid_platform_data *pdata); + int (*get_bklight_max)(struct mipid_platform_data *pdata); +}; + +#endif + +#endif diff --git a/include/linux/platform_data/leds-lm3556.h b/include/linux/platform_data/leds-lm3556.h deleted file mode 100644 index 4b4e7d6b052..00000000000 --- a/include/linux/platform_data/leds-lm3556.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03) - * Copyright (C) 2012 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __LINUX_LM3556_H -#define __LINUX_LM3556_H - -#define LM3556_NAME "leds-lm3556" - -enum lm3556_pin_polarity { - PIN_LOW_ACTIVE = 0, - PIN_HIGH_ACTIVE, -}; - -enum lm3556_pin_enable { - PIN_DISABLED = 0, - PIN_ENABLED, -}; - -enum lm3556_strobe_usuage { - STROBE_EDGE_DETECT = 0, - STROBE_LEVEL_DETECT, -}; - -enum lm3556_indic_mode { - INDIC_MODE_INTERNAL = 0, - INDIC_MODE_EXTERNAL, -}; - -struct lm3556_platform_data { - enum lm3556_pin_enable torch_pin_en; - enum lm3556_pin_polarity torch_pin_polarity; - - enum lm3556_strobe_usuage strobe_usuage; - enum lm3556_pin_enable strobe_pin_en; - enum lm3556_pin_polarity strobe_pin_polarity; - - enum lm3556_pin_enable tx_pin_en; - enum lm3556_pin_polarity tx_pin_polarity; - - enum lm3556_indic_mode indicator_mode; -}; - -#endif /* __LINUX_LM3556_H */ diff --git a/include/linux/platform_data/leds-lm355x.h b/include/linux/platform_data/leds-lm355x.h new file mode 100644 index 00000000000..b88724bb0b4 --- /dev/null +++ b/include/linux/platform_data/leds-lm355x.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Texas Instruments + * + * License Terms: GNU General Public License v2 + * + * Simple driver for Texas Instruments LM355x LED driver chip + * + * Author: G.Shark Jeong <gshark.jeong@gmail.com> + * Daniel Jeong <daniel.jeong@ti.com> + */ + +#define LM355x_NAME "leds-lm355x" +#define LM3554_NAME "leds-lm3554" +#define LM3556_NAME "leds-lm3556" + +/* lm3554 : strobe def. on */ +enum lm355x_strobe { + LM355x_PIN_STROBE_DISABLE = 0x00, + LM355x_PIN_STROBE_ENABLE = 0x01, +}; + +enum lm355x_torch { + LM355x_PIN_TORCH_DISABLE = 0, + LM3554_PIN_TORCH_ENABLE = 0x80, + LM3556_PIN_TORCH_ENABLE = 0x10, +}; + +enum lm355x_tx2 { + LM355x_PIN_TX_DISABLE = 0, + LM3554_PIN_TX_ENABLE = 0x20, + LM3556_PIN_TX_ENABLE = 0x40, +}; + +enum lm355x_ntc { + LM355x_PIN_NTC_DISABLE = 0, + LM3554_PIN_NTC_ENABLE = 0x08, + LM3556_PIN_NTC_ENABLE = 0x80, +}; + +enum lm355x_pmode { + LM355x_PMODE_DISABLE = 0, + LM355x_PMODE_ENABLE = 0x04, +}; + +/* + * struct lm3554_platform_data + * @pin_strobe: strobe input + * @pin_torch : input pin + * lm3554-tx1/torch/gpio1 + * lm3556-torch + * @pin_tx2 : input pin + * lm3554-envm/tx2/gpio2 + * lm3556-tx pin + * @ntc_pin : output pin + * lm3554-ledi/ntc + * lm3556-temp pin + * @pass_mode : pass mode + */ +struct lm355x_platform_data { + enum lm355x_strobe pin_strobe; + enum lm355x_torch pin_tx1; + enum lm355x_tx2 pin_tx2; + enum lm355x_ntc ntc_pin; + + enum lm355x_pmode pass_mode; +}; diff --git a/include/linux/platform_data/leds-lm3642.h b/include/linux/platform_data/leds-lm3642.h new file mode 100644 index 00000000000..72d6ee6ade5 --- /dev/null +++ b/include/linux/platform_data/leds-lm3642.h @@ -0,0 +1,38 @@ +/* +* Copyright (C) 2012 Texas Instruments +* +* License Terms: GNU General Public License v2 +* +* Simple driver for Texas Instruments LM3642 LED driver chip +* +* Author: G.Shark Jeong <gshark.jeong@gmail.com> +* Daniel Jeong <daniel.jeong@ti.com> +*/ + +#ifndef __LINUX_LM3642_H +#define __LINUX_LM3642_H + +#define LM3642_NAME "leds-lm3642" + +enum lm3642_torch_pin_enable { + LM3642_TORCH_PIN_DISABLE = 0x00, + LM3642_TORCH_PIN_ENABLE = 0x10, +}; + +enum lm3642_strobe_pin_enable { + LM3642_STROBE_PIN_DISABLE = 0x00, + LM3642_STROBE_PIN_ENABLE = 0x20, +}; + +enum lm3642_tx_pin_enable { + LM3642_TX_PIN_DISABLE = 0x00, + LM3642_TX_PIN_ENABLE = 0x40, +}; + +struct lm3642_platform_data { + enum lm3642_torch_pin_enable torch_pin; + enum lm3642_strobe_pin_enable strobe_pin; + enum lm3642_tx_pin_enable tx_pin; +}; + +#endif /* __LINUX_LM3642_H */ diff --git a/include/linux/platform_data/leds-pca9633.h b/include/linux/platform_data/leds-pca9633.h new file mode 100644 index 00000000000..c5bf29b6fa7 --- /dev/null +++ b/include/linux/platform_data/leds-pca9633.h @@ -0,0 +1,35 @@ +/* + * PCA9633 LED chip driver. + * + * Copyright 2012 bct electronic GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_PCA9633_H +#define __LINUX_PCA9633_H +#include <linux/leds.h> + +enum pca9633_outdrv { + PCA9633_OPEN_DRAIN, + PCA9633_TOTEM_POLE, /* aka push-pull */ +}; + +struct pca9633_platform_data { + struct led_platform_data leds; + enum pca9633_outdrv outdrv; +}; + +#endif /* __LINUX_PCA9633_H*/ diff --git a/include/linux/platform_data/lm3630_bl.h b/include/linux/platform_data/lm3630_bl.h new file mode 100644 index 00000000000..9176dd3f2d6 --- /dev/null +++ b/include/linux/platform_data/lm3630_bl.h @@ -0,0 +1,57 @@ +/* +* Simple driver for Texas Instruments LM3630 LED Flash driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +#ifndef __LINUX_LM3630_H +#define __LINUX_LM3630_H + +#define LM3630_NAME "lm3630_bl" + +enum lm3630_pwm_ctrl { + PWM_CTRL_DISABLE = 0, + PWM_CTRL_BANK_A, + PWM_CTRL_BANK_B, + PWM_CTRL_BANK_ALL, +}; + +enum lm3630_pwm_active { + PWM_ACTIVE_HIGH = 0, + PWM_ACTIVE_LOW, +}; + +enum lm3630_bank_a_ctrl { + BANK_A_CTRL_DISABLE = 0x0, + BANK_A_CTRL_LED1 = 0x4, + BANK_A_CTRL_LED2 = 0x1, + BANK_A_CTRL_ALL = 0x5, +}; + +enum lm3630_bank_b_ctrl { + BANK_B_CTRL_DISABLE = 0, + BANK_B_CTRL_LED2, +}; + +struct lm3630_platform_data { + + /* maximum brightness */ + int max_brt_led1; + int max_brt_led2; + + /* initial on brightness */ + int init_brt_led1; + int init_brt_led2; + enum lm3630_pwm_ctrl pwm_ctrl; + enum lm3630_pwm_active pwm_active; + enum lm3630_bank_a_ctrl bank_a_ctrl; + enum lm3630_bank_b_ctrl bank_b_ctrl; + unsigned int pwm_period; + void (*pwm_set_intensity) (int brightness, int max_brightness); +}; + +#endif /* __LINUX_LM3630_H */ diff --git a/include/linux/platform_data/lm3639_bl.h b/include/linux/platform_data/lm3639_bl.h new file mode 100644 index 00000000000..5234cd5ed16 --- /dev/null +++ b/include/linux/platform_data/lm3639_bl.h @@ -0,0 +1,69 @@ +/* +* Simple driver for Texas Instruments LM3630 LED Flash driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +#ifndef __LINUX_LM3639_H +#define __LINUX_LM3639_H + +#define LM3639_NAME "lm3639_bl" + +enum lm3639_pwm { + LM3639_PWM_DISABLE = 0x00, + LM3639_PWM_EN_ACTLOW = 0x48, + LM3639_PWM_EN_ACTHIGH = 0x40, +}; + +enum lm3639_strobe { + LM3639_STROBE_DISABLE = 0x00, + LM3639_STROBE_EN_ACTLOW = 0x10, + LM3639_STROBE_EN_ACTHIGH = 0x30, +}; + +enum lm3639_txpin { + LM3639_TXPIN_DISABLE = 0x00, + LM3639_TXPIN_EN_ACTLOW = 0x04, + LM3639_TXPIN_EN_ACTHIGH = 0x0C, +}; + +enum lm3639_fleds { + LM3639_FLED_DIASBLE_ALL = 0x00, + LM3639_FLED_EN_1 = 0x40, + LM3639_FLED_EN_2 = 0x20, + LM3639_FLED_EN_ALL = 0x60, +}; + +enum lm3639_bleds { + LM3639_BLED_DIASBLE_ALL = 0x00, + LM3639_BLED_EN_1 = 0x10, + LM3639_BLED_EN_2 = 0x08, + LM3639_BLED_EN_ALL = 0x18, +}; +enum lm3639_bled_mode { + LM3639_BLED_MODE_EXPONETIAL = 0x00, + LM3639_BLED_MODE_LINEAR = 0x10, +}; + +struct lm3639_platform_data { + unsigned int max_brt_led; + unsigned int init_brt_led; + + /* input pins */ + enum lm3639_pwm pin_pwm; + enum lm3639_strobe pin_strobe; + enum lm3639_txpin pin_tx; + + /* output pins */ + enum lm3639_fleds fled_pins; + enum lm3639_bleds bled_pins; + enum lm3639_bled_mode bled_mode; + + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (void); +}; +#endif /* __LINUX_LM3639_H */ diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index cc76f1f18f1..761f3175236 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -46,6 +46,8 @@ #define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ (LP8556_I2C_ONLY << BRT_MODE_SHFT)) #define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) +#define LP8556_FAST_CONFIG BIT(7) /* use it if EPROMs should be maintained + when exiting the low power mode */ enum lp855x_chip_id { LP8550, diff --git a/include/linux/platform_data/lp8727.h b/include/linux/platform_data/lp8727.h index ea98c6133d3..47128a50e04 100644 --- a/include/linux/platform_data/lp8727.h +++ b/include/linux/platform_data/lp8727.h @@ -13,32 +13,32 @@ #define _LP8727_H enum lp8727_eoc_level { - EOC_5P, - EOC_10P, - EOC_16P, - EOC_20P, - EOC_25P, - EOC_33P, - EOC_50P, + LP8727_EOC_5P, + LP8727_EOC_10P, + LP8727_EOC_16P, + LP8727_EOC_20P, + LP8727_EOC_25P, + LP8727_EOC_33P, + LP8727_EOC_50P, }; enum lp8727_ichg { - ICHG_90mA, - ICHG_100mA, - ICHG_400mA, - ICHG_450mA, - ICHG_500mA, - ICHG_600mA, - ICHG_700mA, - ICHG_800mA, - ICHG_900mA, - ICHG_1000mA, + LP8727_ICHG_90mA, + LP8727_ICHG_100mA, + LP8727_ICHG_400mA, + LP8727_ICHG_450mA, + LP8727_ICHG_500mA, + LP8727_ICHG_600mA, + LP8727_ICHG_700mA, + LP8727_ICHG_800mA, + LP8727_ICHG_900mA, + LP8727_ICHG_1000mA, }; /** * struct lp8727_chg_param * @eoc_level : end of charge level setting - * @ichg : charging current + * @ichg : charging current */ struct lp8727_chg_param { enum lp8727_eoc_level eoc_level; @@ -47,19 +47,22 @@ struct lp8727_chg_param { /** * struct lp8727_platform_data - * @get_batt_present : check battery status - exists or not - * @get_batt_level : get battery voltage (mV) + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) * @get_batt_capacity : get battery capacity (%) - * @get_batt_temp : get battery temperature - * @ac, @usb : charging parameters each charger type + * @get_batt_temp : get battery temperature + * @ac : charging parameters for AC type charger + * @usb : charging parameters for USB type charger + * @debounce_msec : interrupt debounce time */ struct lp8727_platform_data { u8 (*get_batt_present)(void); u16 (*get_batt_level)(void); u8 (*get_batt_capacity)(void); u8 (*get_batt_temp)(void); - struct lp8727_chg_param ac; - struct lp8727_chg_param usb; + struct lp8727_chg_param *ac; + struct lp8727_chg_param *usb; + unsigned int debounce_msec; }; #endif diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h new file mode 100644 index 00000000000..e2a41dd7690 --- /dev/null +++ b/include/linux/platform_data/max197.h @@ -0,0 +1,21 @@ +/* + * Maxim MAX197 A/D Converter Driver + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/max197 file. + */ + +/** + * struct max197_platform_data - MAX197 connectivity info + * @convert: Function used to start a conversion with control byte ctrl. + * It must return the raw data, or a negative error code. + */ +struct max197_platform_data { + int (*convert)(u8 ctrl); +}; diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h new file mode 100644 index 00000000000..91648bf5fc5 --- /dev/null +++ b/include/linux/platform_data/max310x.h @@ -0,0 +1,67 @@ +/* + * Maxim (Dallas) MAX3107/8 serial driver + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org> + * Based on max3110.c, by Feng Tang <feng.tang@intel.com> + * Based on max3107.c, by Aavamobile + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _MAX310X_H_ +#define _MAX310X_H_ + +/* + * Example board initialization data: + * + * static struct max310x_pdata max3107_pdata = { + * .driver_flags = MAX310X_EXT_CLK, + * .uart_flags[0] = MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL, + * .frequency = 3686400, + * .gpio_base = -1, + * }; + * + * static struct spi_board_info spi_device_max3107[] = { + * { + * .modalias = "max3107", + * .irq = IRQ_EINT3, + * .bus_num = 1, + * .chip_select = 1, + * .platform_data = &max3107_pdata, + * }, + * }; + */ + +#define MAX310X_MAX_UARTS 1 + +/* MAX310X platform data structure */ +struct max310x_pdata { + /* Flags global to driver */ + const u8 driver_flags:2; +#define MAX310X_EXT_CLK (0x00000001) /* External clock enable */ +#define MAX310X_AUTOSLEEP (0x00000002) /* Enable AutoSleep mode */ + /* Flags global to UART port */ + const u8 uart_flags[MAX310X_MAX_UARTS]; +#define MAX310X_LOOPBACK (0x00000001) /* Loopback mode enable */ +#define MAX310X_ECHO_SUPRESS (0x00000002) /* Enable echo supress */ +#define MAX310X_AUTO_DIR_CTRL (0x00000004) /* Enable Auto direction + * control (RS-485) + */ + /* Frequency (extrenal clock or crystal) */ + const int frequency; + /* GPIO base number (can be negative) */ + const int gpio_base; + /* Called during startup */ + void (*init)(void); + /* Called before finish */ + void (*exit)(void); + /* Suspend callback */ + void (*suspend)(int do_suspend); +}; + +#endif diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h new file mode 100644 index 00000000000..2a330ec9e2a --- /dev/null +++ b/include/linux/platform_data/mmp_dma.h @@ -0,0 +1,19 @@ +/* + * MMP Platform DMA Management + * + * Copyright (c) 2011 Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef MMP_DMA_H +#define MMP_DMA_H + +struct mmp_dma_platdata { + int dma_channels; +}; + +#endif /* MMP_DMA_H */ diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h new file mode 100644 index 00000000000..1a68c1e5fe5 --- /dev/null +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -0,0 +1,43 @@ +/* + * arch/arm/plat-omap/include/mach/nand.h + * + * Copyright (C) 2006 Micron Technology Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <plat/gpmc.h> +#include <linux/mtd/partitions.h> + +enum nand_io { + NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */ + NAND_OMAP_POLLED, /* polled mode, without prefetch */ + NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */ + NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */ +}; + +struct omap_nand_platform_data { + int cs; + struct mtd_partition *parts; + struct gpmc_timings *gpmc_t; + int nr_parts; + bool dev_ready; + enum nand_io xfer_type; + int devsize; + enum omap_ecc ecc_opt; + struct gpmc_nand_regs reg; +}; + +/* minimum size for IO mapping */ +#define NAND_IO_SIZE 4 + +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +extern int gpmc_nand_init(struct omap_nand_platform_data *d); +#else +static inline int gpmc_nand_init(struct omap_nand_platform_data *d) +{ + return 0; +} +#endif diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h new file mode 100644 index 00000000000..2858667d2e4 --- /dev/null +++ b/include/linux/platform_data/mtd-onenand-omap2.h @@ -0,0 +1,53 @@ +/* + * arch/arm/plat-omap/include/mach/onenand.h + * + * Copyright (C) 2006 Nokia Corporation + * Author: Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#define ONENAND_SYNC_READ (1 << 0) +#define ONENAND_SYNC_READWRITE (1 << 1) + +struct onenand_freq_info { + u16 maf_id; + u16 dev_id; + u16 ver_id; +}; + +struct omap_onenand_platform_data { + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*onenand_setup)(void __iomem *, int *freq_ptr); + int (*get_freq)(const struct onenand_freq_info *freq_info, + bool *clk_dep); + int dma_channel; + u8 flags; + u8 regulator_can_sleep; + u8 skip_initial_unlocking; +}; + +#define ONENAND_MAX_PARTITIONS 8 + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); + +#else + +#define board_onenand_data NULL + +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} + +#endif diff --git a/include/linux/platform_data/omap-twl4030.h b/include/linux/platform_data/omap-twl4030.h new file mode 100644 index 00000000000..c7bef788daa --- /dev/null +++ b/include/linux/platform_data/omap-twl4030.h @@ -0,0 +1,32 @@ +/** + * omap-twl4030.h - ASoC machine driver for TI SoC based boards with twl4030 + * codec, header. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _OMAP_TWL4030_H_ +#define _OMAP_TWL4030_H_ + +struct omap_tw4030_pdata { + const char *card_name; +}; + +#endif /* _OMAP_TWL4030_H_ */ diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h new file mode 100644 index 00000000000..881a8e92d60 --- /dev/null +++ b/include/linux/platform_data/omap1_bl.h @@ -0,0 +1,11 @@ +#ifndef __OMAP1_BL_H__ +#define __OMAP1_BL_H__ + +#include <linux/device.h> + +struct omap_backlight_config { + int default_intensity; + int (*set_power)(struct device *dev, int state); +}; + +#endif diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h new file mode 100644 index 00000000000..30dea251b83 --- /dev/null +++ b/include/linux/platform_data/pinctrl-coh901.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2007-2012 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * GPIO block resgister definitions and inline macros for + * U300 GPIO COH 901 335 or COH 901 571/3 + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#ifndef __MACH_U300_GPIO_U300_H +#define __MACH_U300_GPIO_U300_H + +/** + * struct u300_gpio_platform - U300 GPIO platform data + * @ports: number of GPIO block ports + * @gpio_base: first GPIO number for this block (use a free range) + * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) + * @pinctrl_device: pin control device to spawn as child + */ +struct u300_gpio_platform { + u8 ports; + int gpio_base; + int gpio_irq_base; + struct platform_device *pinctrl_device; +}; + +#endif /* __MACH_U300_GPIO_U300_H */ diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h index 51ad0995aba..59acd987ed3 100644 --- a/include/linux/platform_data/pxa_sdhci.h +++ b/include/linux/platform_data/pxa_sdhci.h @@ -49,6 +49,7 @@ struct sdhci_pxa_platdata { bool ext_cd_gpio_invert; unsigned int max_speed; unsigned int host_caps; + unsigned int host_caps2; unsigned int quirks; unsigned int pm_caps; }; diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h new file mode 100644 index 00000000000..3c1c6444ec4 --- /dev/null +++ b/include/linux/platform_data/remoteproc-omap.h @@ -0,0 +1,59 @@ +/* + * Remote Processor - omap-specific bits + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PLAT_REMOTEPROC_H +#define _PLAT_REMOTEPROC_H + +struct rproc_ops; +struct platform_device; + +/* + * struct omap_rproc_pdata - omap remoteproc's platform data + * @name: the remoteproc's name + * @oh_name: omap hwmod device + * @oh_name_opt: optional, secondary omap hwmod device + * @firmware: name of firmware file to load + * @mbox_name: name of omap mailbox device to use with this rproc + * @ops: start/stop rproc handlers + * @device_enable: omap-specific handler for enabling a device + * @device_shutdown: omap-specific handler for shutting down a device + * @set_bootaddr: omap-specific handler for setting the rproc boot address + */ +struct omap_rproc_pdata { + const char *name; + const char *oh_name; + const char *oh_name_opt; + const char *firmware; + const char *mbox_name; + const struct rproc_ops *ops; + int (*device_enable) (struct platform_device *pdev); + int (*device_shutdown) (struct platform_device *pdev); + void(*set_bootaddr)(u32); +}; + +#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE) + +void __init omap_rproc_reserve_cma(void); + +#else + +void __init omap_rproc_reserve_cma(void) +{ +} + +#endif + +#endif /* _PLAT_REMOTEPROC_H */ diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h new file mode 100644 index 00000000000..997b0663415 --- /dev/null +++ b/include/linux/platform_data/sc18is602.h @@ -0,0 +1,19 @@ +/* + * Platform data for NXP SC18IS602/603 + * + * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/spi/sc18is602 file. + */ + +/** + * struct sc18is602_platform_data - sc18is602 info + * @clock_frequency SC18IS603 oscillator frequency + */ +struct sc18is602_platform_data { + u32 clock_frequency; +}; diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/sccnxp.h new file mode 100644 index 00000000000..7311ccd3217 --- /dev/null +++ b/include/linux/platform_data/sccnxp.h @@ -0,0 +1,93 @@ +/* + * NXP (Philips) SCC+++(SCN+++) serial driver + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __SCCNXP_H +#define __SCCNXP_H + +#define SCCNXP_MAX_UARTS 2 + +/* Output lines */ +#define LINE_OP0 1 +#define LINE_OP1 2 +#define LINE_OP2 3 +#define LINE_OP3 4 +#define LINE_OP4 5 +#define LINE_OP5 6 +#define LINE_OP6 7 +#define LINE_OP7 8 + +/* Input lines */ +#define LINE_IP0 9 +#define LINE_IP1 10 +#define LINE_IP2 11 +#define LINE_IP3 12 +#define LINE_IP4 13 +#define LINE_IP5 14 +#define LINE_IP6 15 + +/* Signals */ +#define DTR_OP 0 /* DTR */ +#define RTS_OP 4 /* RTS */ +#define DSR_IP 8 /* DSR */ +#define CTS_IP 12 /* CTS */ +#define DCD_IP 16 /* DCD */ +#define RNG_IP 20 /* RNG */ + +#define DIR_OP 24 /* Special signal for control RS-485. + * Goes high when transmit, + * then goes low. + */ + +/* Routing control signal 'sig' to line 'line' */ +#define MCTRL_SIG(sig, line) ((line) << (sig)) + +/* + * Example board initialization data: + * + * static struct resource sc2892_resources[] = { + * DEFINE_RES_MEM(UART_PHYS_START, 0x10), + * DEFINE_RES_IRQ(IRQ_EXT2), + * }; + * + * static struct sccnxp_pdata sc2892_info = { + * .frequency = 3686400, + * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0), + * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1), + * }; + * + * static struct platform_device sc2892 = { + * .name = "sc2892", + * .id = -1, + * .resource = sc2892_resources, + * .num_resources = ARRAY_SIZE(sc2892_resources), + * .dev = { + * .platform_data = &sc2892_info, + * }, + * }; + */ + +/* SCCNXP platform data structure */ +struct sccnxp_pdata { + /* Frequency (extrenal clock or crystal) */ + int frequency; + /* Shift for A0 line */ + const u8 reg_shift; + /* Modem control lines configuration */ + const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + /* Called during startup */ + void (*init)(void); + /* Called before finish */ + void (*exit)(void); +}; + +#endif diff --git a/include/linux/platform_data/shmob_drm.h b/include/linux/platform_data/shmob_drm.h new file mode 100644 index 00000000000..7c686d335c1 --- /dev/null +++ b/include/linux/platform_data/shmob_drm.h @@ -0,0 +1,99 @@ +/* + * shmob_drm.h -- SH Mobile DRM driver + * + * Copyright (C) 2012 Renesas Corporation + * + * Laurent Pinchart (laurent.pinchart@ideasonboard.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __SHMOB_DRM_H__ +#define __SHMOB_DRM_H__ + +#include <linux/kernel.h> + +#include <drm/drm_mode.h> + +struct sh_mobile_meram_cfg; +struct sh_mobile_meram_info; + +enum shmob_drm_clk_source { + SHMOB_DRM_CLK_BUS, + SHMOB_DRM_CLK_PERIPHERAL, + SHMOB_DRM_CLK_EXTERNAL, +}; + +enum shmob_drm_interface { + SHMOB_DRM_IFACE_RGB8, /* 24bpp, 8:8:8 */ + SHMOB_DRM_IFACE_RGB9, /* 18bpp, 9:9 */ + SHMOB_DRM_IFACE_RGB12A, /* 24bpp, 12:12 */ + SHMOB_DRM_IFACE_RGB12B, /* 12bpp */ + SHMOB_DRM_IFACE_RGB16, /* 16bpp */ + SHMOB_DRM_IFACE_RGB18, /* 18bpp */ + SHMOB_DRM_IFACE_RGB24, /* 24bpp */ + SHMOB_DRM_IFACE_YUV422, /* 16bpp */ + SHMOB_DRM_IFACE_SYS8A, /* 24bpp, 8:8:8 */ + SHMOB_DRM_IFACE_SYS8B, /* 18bpp, 8:8:2 */ + SHMOB_DRM_IFACE_SYS8C, /* 18bpp, 2:8:8 */ + SHMOB_DRM_IFACE_SYS8D, /* 16bpp, 8:8 */ + SHMOB_DRM_IFACE_SYS9, /* 18bpp, 9:9 */ + SHMOB_DRM_IFACE_SYS12, /* 24bpp, 12:12 */ + SHMOB_DRM_IFACE_SYS16A, /* 16bpp */ + SHMOB_DRM_IFACE_SYS16B, /* 18bpp, 16:2 */ + SHMOB_DRM_IFACE_SYS16C, /* 18bpp, 2:16 */ + SHMOB_DRM_IFACE_SYS18, /* 18bpp */ + SHMOB_DRM_IFACE_SYS24, /* 24bpp */ +}; + +struct shmob_drm_backlight_data { + const char *name; + int max_brightness; + int (*get_brightness)(void); + int (*set_brightness)(int brightness); +}; + +struct shmob_drm_panel_data { + unsigned int width_mm; /* Panel width in mm */ + unsigned int height_mm; /* Panel height in mm */ + struct drm_mode_modeinfo mode; +}; + +struct shmob_drm_sys_interface_data { + unsigned int read_latch:6; + unsigned int read_setup:8; + unsigned int read_cycle:8; + unsigned int read_strobe:8; + unsigned int write_setup:8; + unsigned int write_cycle:8; + unsigned int write_strobe:8; + unsigned int cs_setup:3; + unsigned int vsync_active_high:1; + unsigned int vsync_dir_input:1; +}; + +#define SHMOB_DRM_IFACE_FL_DWPOL (1 << 0) /* Rising edge dot clock data latch */ +#define SHMOB_DRM_IFACE_FL_DIPOL (1 << 1) /* Active low display enable */ +#define SHMOB_DRM_IFACE_FL_DAPOL (1 << 2) /* Active low display data */ +#define SHMOB_DRM_IFACE_FL_HSCNT (1 << 3) /* Disable HSYNC during VBLANK */ +#define SHMOB_DRM_IFACE_FL_DWCNT (1 << 4) /* Disable dotclock during blanking */ + +struct shmob_drm_interface_data { + enum shmob_drm_interface interface; + struct shmob_drm_sys_interface_data sys; + unsigned int clk_div; + unsigned int flags; +}; + +struct shmob_drm_platform_data { + enum shmob_drm_clk_source clk_source; + struct shmob_drm_interface_data iface; + struct shmob_drm_panel_data panel; + struct shmob_drm_backlight_data backlight; + const struct sh_mobile_meram_cfg *meram; +}; + +#endif /* __SHMOB_DRM_H__ */ diff --git a/include/linux/platform_data/sht15.h b/include/linux/platform_data/sht15.h new file mode 100644 index 00000000000..33e0fd27225 --- /dev/null +++ b/include/linux/platform_data/sht15.h @@ -0,0 +1,33 @@ +/* + * sht15.h - support for the SHT15 Temperature and Humidity Sensor + * + * Copyright (c) 2009 Jonathan Cameron + * + * Copyright (c) 2007 Wouter Horre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/sht15 file. + */ + +/** + * struct sht15_platform_data - sht15 connectivity info + * @gpio_data: no. of gpio to which bidirectional data line is + * connected. + * @gpio_sck: no. of gpio to which the data clock is connected. + * @supply_mv: supply voltage in mv. Overridden by regulator if + * available. + * @checksum: flag to indicate the checksum should be validated. + * @no_otp_reload: flag to indicate no reload from OTP. + * @low_resolution: flag to indicate the temp/humidity resolution to use. + */ +struct sht15_platform_data { + int gpio_data; + int gpio_sck; + int supply_mv; + bool checksum; + bool no_otp_reload; + bool low_resolution; +}; diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h new file mode 100644 index 00000000000..a357eb26bd2 --- /dev/null +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -0,0 +1,23 @@ +#ifndef _OMAP2_MCSPI_H +#define _OMAP2_MCSPI_H + +#define OMAP2_MCSPI_REV 0 +#define OMAP3_MCSPI_REV 1 +#define OMAP4_MCSPI_REV 2 + +#define OMAP4_MCSPI_REG_OFFSET 0x100 + +struct omap2_mcspi_platform_config { + unsigned short num_cs; + unsigned int regs_offset; +}; + +struct omap2_mcspi_dev_attr { + unsigned short num_chipselect; +}; + +struct omap2_mcspi_device_config { + unsigned turbo_mode:1; +}; + +#endif diff --git a/include/linux/platform_data/voltage-omap.h b/include/linux/platform_data/voltage-omap.h new file mode 100644 index 00000000000..5be4d5def42 --- /dev/null +++ b/include/linux/platform_data/voltage-omap.h @@ -0,0 +1,39 @@ +/* + * OMAP Voltage Management Routines + * + * Copyright (C) 2011, Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_VOLTAGE_H +#define __ARCH_ARM_OMAP_VOLTAGE_H + +/** + * struct omap_volt_data - Omap voltage specific data. + * @voltage_nominal: The possible voltage value in uV + * @sr_efuse_offs: The offset of the efuse register(from system + * control module base address) from where to read + * the n-target value for the smartreflex module. + * @sr_errminlimit: Error min limit value for smartreflex. This value + * differs at differnet opp and thus is linked + * with voltage. + * @vp_errorgain: Error gain value for the voltage processor. This + * field also differs according to the voltage/opp. + */ +struct omap_volt_data { + u32 volt_nominal; + u32 sr_efuse_offs; + u8 sr_errminlimit; + u8 vp_errgain; +}; +struct voltagedomain; + +struct voltagedomain *voltdm_lookup(const char *name); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); +struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, + unsigned long volt); +#endif |