diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/clk-nomadik.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/clk-ux500.h | 3 | ||||
| -rw-r--r-- | include/linux/platform_data/davinci_asp.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-s3c24xx.h | 46 | ||||
| -rw-r--r-- | include/linux/platform_data/gpio-davinci.h | 60 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-lp55xx.h | 7 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-pca9685.h | 35 | ||||
| -rw-r--r-- | include/linux/platform_data/lm3630_bl.h | 57 | ||||
| -rw-r--r-- | include/linux/platform_data/lm3630a_bl.h | 65 | ||||
| -rw-r--r-- | include/linux/platform_data/lp855x.h | 19 | ||||
| -rw-r--r-- | include/linux/platform_data/mipi-csis.h | 9 | ||||
| -rw-r--r-- | include/linux/platform_data/pinctrl-adi2.h | 40 | ||||
| -rw-r--r-- | include/linux/platform_data/pinctrl-single.h | 12 | ||||
| -rw-r--r-- | include/linux/platform_data/usb-ehci-s5p.h | 21 | ||||
| -rw-r--r-- | include/linux/platform_data/usb-ohci-exynos.h | 21 | ||||
| -rw-r--r-- | include/linux/platform_data/usb-rcar-gen2-phy.h | 22 |
16 files changed, 307 insertions, 114 deletions
diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h deleted file mode 100644 index 5713c87b247..00000000000 --- a/include/linux/platform_data/clk-nomadik.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Minimal platform data header */ -void nomadik_clk_init(void); diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h index 9d98f3aaa16..97baf831e07 100644 --- a/include/linux/platform_data/clk-ux500.h +++ b/include/linux/platform_data/clk-ux500.h @@ -10,6 +10,9 @@ #ifndef __CLK_UX500_H #define __CLK_UX500_H +void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); + void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, u32 clkrst5_base, u32 clkrst6_base); void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index 8db5ae03b6e..689a856b86f 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -84,6 +84,8 @@ struct snd_platform_data { u8 version; u8 txnumevt; u8 rxnumevt; + int tx_dma_channel; + int rx_dma_channel; }; enum { diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h new file mode 100644 index 00000000000..89ba1b0c90e --- /dev/null +++ b/include/linux/platform_data/dma-s3c24xx.h @@ -0,0 +1,46 @@ +/* + * S3C24XX DMA handling + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +/* Helper to encode the source selection constraints for early s3c socs. */ +#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4) + +enum s3c24xx_dma_bus { + S3C24XX_DMA_APB, + S3C24XX_DMA_AHB, +}; + +/** + * @bus: on which bus does the peripheral reside - AHB or APB. + * @handshake: is a handshake with the peripheral necessary + * @chansel: channel selection information, depending on variant; reqsel for + * s3c2443 and later and channel-selection map for earlier SoCs + * see CHANSEL doc in s3c2443-dma.c + */ +struct s3c24xx_dma_channel { + enum s3c24xx_dma_bus bus; + bool handshake; + u16 chansel; +}; + +/** + * struct s3c24xx_dma_platdata - platform specific settings + * @num_phy_channels: number of physical channels + * @channels: array of virtual channel descriptions + * @num_channels: number of virtual channels + */ +struct s3c24xx_dma_platdata { + int num_phy_channels; + struct s3c24xx_dma_channel *channels; + int num_channels; +}; + +struct dma_chan; +bool s3c24xx_dma_filter(struct dma_chan *chan, void *param); diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h new file mode 100644 index 00000000000..6efd2026458 --- /dev/null +++ b/include/linux/platform_data/gpio-davinci.h @@ -0,0 +1,60 @@ +/* + * DaVinci GPIO Platform Related Defines + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DAVINCI_GPIO_PLATFORM_H +#define __DAVINCI_GPIO_PLATFORM_H + +#include <linux/io.h> +#include <linux/spinlock.h> + +#include <asm-generic/gpio.h> + +enum davinci_gpio_type { + GPIO_TYPE_TNETV107X = 0, +}; + +struct davinci_gpio_platform_data { + u32 ngpio; + u32 gpio_unbanked; + u32 intc_irq_num; +}; + + +struct davinci_gpio_controller { + struct gpio_chip chip; + int irq_base; + /* Serialize access to GPIO registers */ + spinlock_t lock; + void __iomem *regs; + void __iomem *set_data; + void __iomem *clr_data; + void __iomem *in_data; + int gpio_unbanked; + unsigned gpio_irq; +}; + +/* + * basic gpio routines + */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ + +/* Convert GPIO signal to GPIO pin number */ +#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) + +static inline u32 __gpio_mask(unsigned gpio) +{ + return 1 << (gpio % 32); +} +#endif diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 51a2ff579d6..624ff9edad6 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -22,6 +22,7 @@ struct lp55xx_led_config { const char *name; + const char *default_trigger; u8 chan_nr; u8 led_current; /* mA x10, 0 if led is not connected */ u8 max_current; @@ -66,10 +67,8 @@ struct lp55xx_platform_data { /* Clock configuration */ u8 clock_mode; - /* Platform specific functions */ - int (*setup_resources)(void); - void (*release_resources)(void); - void (*enable)(bool state); + /* optional enable GPIO */ + int enable_gpio; /* Predefined pattern data */ struct lp55xx_predef_pattern *patterns; diff --git a/include/linux/platform_data/leds-pca9685.h b/include/linux/platform_data/leds-pca9685.h new file mode 100644 index 00000000000..778e9e4249c --- /dev/null +++ b/include/linux/platform_data/leds-pca9685.h @@ -0,0 +1,35 @@ +/* + * Copyright 2013 Maximilian Güntner <maximilian.guentner@gmail.com> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Based on leds-pca963x.h by Peter Meerwald <p.meerwald@bct-electronic.com> + * + * LED driver for the NXP PCA9685 PWM chip + * + */ + +#ifndef __LINUX_PCA9685_H +#define __LINUX_PCA9685_H + +#include <linux/leds.h> + +enum pca9685_outdrv { + PCA9685_OPEN_DRAIN, + PCA9685_TOTEM_POLE, +}; + +enum pca9685_inverted { + PCA9685_NOT_INVERTED, + PCA9685_INVERTED, +}; + +struct pca9685_platform_data { + struct led_platform_data leds; + enum pca9685_outdrv outdrv; + enum pca9685_inverted inverted; +}; + +#endif /* __LINUX_PCA9685_H */ diff --git a/include/linux/platform_data/lm3630_bl.h b/include/linux/platform_data/lm3630_bl.h deleted file mode 100644 index 9176dd3f2d6..00000000000 --- a/include/linux/platform_data/lm3630_bl.h +++ /dev/null @@ -1,57 +0,0 @@ -/* -* Simple driver for Texas Instruments LM3630 LED Flash driver chip -* Copyright (C) 2012 Texas Instruments -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -*/ - -#ifndef __LINUX_LM3630_H -#define __LINUX_LM3630_H - -#define LM3630_NAME "lm3630_bl" - -enum lm3630_pwm_ctrl { - PWM_CTRL_DISABLE = 0, - PWM_CTRL_BANK_A, - PWM_CTRL_BANK_B, - PWM_CTRL_BANK_ALL, -}; - -enum lm3630_pwm_active { - PWM_ACTIVE_HIGH = 0, - PWM_ACTIVE_LOW, -}; - -enum lm3630_bank_a_ctrl { - BANK_A_CTRL_DISABLE = 0x0, - BANK_A_CTRL_LED1 = 0x4, - BANK_A_CTRL_LED2 = 0x1, - BANK_A_CTRL_ALL = 0x5, -}; - -enum lm3630_bank_b_ctrl { - BANK_B_CTRL_DISABLE = 0, - BANK_B_CTRL_LED2, -}; - -struct lm3630_platform_data { - - /* maximum brightness */ - int max_brt_led1; - int max_brt_led2; - - /* initial on brightness */ - int init_brt_led1; - int init_brt_led2; - enum lm3630_pwm_ctrl pwm_ctrl; - enum lm3630_pwm_active pwm_active; - enum lm3630_bank_a_ctrl bank_a_ctrl; - enum lm3630_bank_b_ctrl bank_b_ctrl; - unsigned int pwm_period; - void (*pwm_set_intensity) (int brightness, int max_brightness); -}; - -#endif /* __LINUX_LM3630_H */ diff --git a/include/linux/platform_data/lm3630a_bl.h b/include/linux/platform_data/lm3630a_bl.h new file mode 100644 index 00000000000..7538e38e270 --- /dev/null +++ b/include/linux/platform_data/lm3630a_bl.h @@ -0,0 +1,65 @@ +/* +* Simple driver for Texas Instruments LM3630A LED Flash driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +#ifndef __LINUX_LM3630A_H +#define __LINUX_LM3630A_H + +#define LM3630A_NAME "lm3630a_bl" + +enum lm3630a_pwm_ctrl { + LM3630A_PWM_DISABLE = 0x00, + LM3630A_PWM_BANK_A, + LM3630A_PWM_BANK_B, + LM3630A_PWM_BANK_ALL, + LM3630A_PWM_BANK_A_ACT_LOW = 0x05, + LM3630A_PWM_BANK_B_ACT_LOW, + LM3630A_PWM_BANK_ALL_ACT_LOW, +}; + +enum lm3630a_leda_ctrl { + LM3630A_LEDA_DISABLE = 0x00, + LM3630A_LEDA_ENABLE = 0x04, + LM3630A_LEDA_ENABLE_LINEAR = 0x14, +}; + +enum lm3630a_ledb_ctrl { + LM3630A_LEDB_DISABLE = 0x00, + LM3630A_LEDB_ON_A = 0x01, + LM3630A_LEDB_ENABLE = 0x02, + LM3630A_LEDB_ENABLE_LINEAR = 0x0A, +}; + +#define LM3630A_MAX_BRIGHTNESS 255 +/* + *@leda_init_brt : led a init brightness. 4~255 + *@leda_max_brt : led a max brightness. 4~255 + *@leda_ctrl : led a disable, enable linear, enable exponential + *@ledb_init_brt : led b init brightness. 4~255 + *@ledb_max_brt : led b max brightness. 4~255 + *@ledb_ctrl : led b disable, enable linear, enable exponential + *@pwm_period : pwm period + *@pwm_ctrl : pwm disable, bank a or b, active high or low + */ +struct lm3630a_platform_data { + + /* led a config. */ + int leda_init_brt; + int leda_max_brt; + enum lm3630a_leda_ctrl leda_ctrl; + /* led b config. */ + int ledb_init_brt; + int ledb_max_brt; + enum lm3630a_ledb_ctrl ledb_ctrl; + /* pwm config. */ + unsigned int pwm_period; + enum lm3630a_pwm_ctrl pwm_ctrl; +}; + +#endif /* __LINUX_LM3630A_H */ diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index ea3200527dd..1b2ba24e4e0 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -40,6 +40,17 @@ #define LP8553_PWM_CONFIG LP8550_PWM_CONFIG #define LP8553_I2C_CONFIG LP8550_I2C_CONFIG +/* CONFIG register - LP8555 */ +#define LP8555_PWM_STANDBY BIT(7) +#define LP8555_PWM_FILTER BIT(6) +#define LP8555_RELOAD_EPROM BIT(3) /* use it if EPROMs should be reset + when the backlight turns on */ +#define LP8555_OFF_OPENLEDS BIT(2) +#define LP8555_PWM_CONFIG LP8555_PWM_ONLY +#define LP8555_I2C_CONFIG LP8555_I2C_ONLY +#define LP8555_COMB1_CONFIG LP8555_COMBINED1 +#define LP8555_COMB2_CONFIG LP8555_COMBINED2 + /* DEVICE CONTROL register - LP8556 */ #define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) #define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) @@ -65,6 +76,7 @@ enum lp855x_chip_id { LP8551, LP8552, LP8553, + LP8555, LP8556, LP8557, }; @@ -89,6 +101,13 @@ enum lp8553_brighntess_source { LP8553_I2C_ONLY = LP8550_I2C_ONLY, }; +enum lp8555_brightness_source { + LP8555_PWM_ONLY, + LP8555_I2C_ONLY, + LP8555_COMBINED1, /* Brightness register with shaped PWM */ + LP8555_COMBINED2, /* PWM with shaped brightness register */ +}; + enum lp8556_brightness_source { LP8556_PWM_ONLY, LP8556_COMBINED1, /* pwm + i2c before the shaper block */ diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h index bf34e17cee7..c2fd9024717 100644 --- a/include/linux/platform_data/mipi-csis.h +++ b/include/linux/platform_data/mipi-csis.h @@ -25,13 +25,4 @@ struct s5p_platform_mipi_csis { u8 hs_settle; }; -/** - * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control - * @id: MIPI-CSIS harware instance index (0...1) - * @on: true to enable D-PHY and deassert its reset - * false to disable D-PHY - * @return: 0 on success, or negative error code on failure - */ -int s5p_csis_phy_enable(int id, bool on); - #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ diff --git a/include/linux/platform_data/pinctrl-adi2.h b/include/linux/platform_data/pinctrl-adi2.h new file mode 100644 index 00000000000..8f91300617e --- /dev/null +++ b/include/linux/platform_data/pinctrl-adi2.h @@ -0,0 +1,40 @@ +/* + * Pinctrl Driver for ADI GPIO2 controller + * + * Copyright 2007-2013 Analog Devices Inc. + * + * Licensed under the GPLv2 or later + */ + + +#ifndef PINCTRL_ADI2_H +#define PINCTRL_ADI2_H + +#include <linux/io.h> +#include <linux/platform_device.h> + +/** + * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data + * for ADI GPIO2 device. + * + * @port_gpio_base: Optional global GPIO index of the GPIO bank. + * 0 means driver decides. + * @port_pin_base: Pin index of the pin controller device. + * @port_width: PIN number of the GPIO bank device + * @pint_id: GPIO PINT device id that this GPIO bank should map to. + * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A + * GPIO bank can be mapped into either low 16 bits[0] or high 16 + * bits[1] of each PINT register. + * @pint_map: GIOP bank mapping code in PINT device + */ +struct adi_pinctrl_gpio_platform_data { + unsigned int port_gpio_base; + unsigned int port_pin_base; + unsigned int port_width; + u8 pinctrl_id; + u8 pint_id; + bool pint_assign; + u8 pint_map; +}; + +#endif diff --git a/include/linux/platform_data/pinctrl-single.h b/include/linux/platform_data/pinctrl-single.h new file mode 100644 index 00000000000..72eacda9b36 --- /dev/null +++ b/include/linux/platform_data/pinctrl-single.h @@ -0,0 +1,12 @@ +/** + * irq: optional wake-up interrupt + * rearm: optional soc specific rearm function + * + * Note that the irq and rearm setup should come from device + * tree except for omap where there are still some dependencies + * to the legacy PRM code. + */ +struct pcs_pdata { + int irq; + void (*rearm)(void); +}; diff --git a/include/linux/platform_data/usb-ehci-s5p.h b/include/linux/platform_data/usb-ehci-s5p.h deleted file mode 100644 index 5f28cae1858..00000000000 --- a/include/linux/platform_data/usb-ehci-s5p.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_SAMSUNG_EHCI_H -#define __PLAT_SAMSUNG_EHCI_H __FILE__ - -struct s5p_ehci_platdata { - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); - -#endif /* __PLAT_SAMSUNG_EHCI_H */ diff --git a/include/linux/platform_data/usb-ohci-exynos.h b/include/linux/platform_data/usb-ohci-exynos.h deleted file mode 100644 index c256c595be5..00000000000 --- a/include/linux/platform_data/usb-ohci-exynos.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __MACH_EXYNOS_OHCI_H -#define __MACH_EXYNOS_OHCI_H - -struct exynos4_ohci_platdata { - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd); - -#endif /* __MACH_EXYNOS_OHCI_H */ diff --git a/include/linux/platform_data/usb-rcar-gen2-phy.h b/include/linux/platform_data/usb-rcar-gen2-phy.h new file mode 100644 index 00000000000..dd3ba46c0d9 --- /dev/null +++ b/include/linux/platform_data/usb-rcar-gen2-phy.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __USB_RCAR_GEN2_PHY_H +#define __USB_RCAR_GEN2_PHY_H + +#include <linux/types.h> + +struct rcar_gen2_phy_platform_data { + /* USB channel 0 configuration */ + bool chan0_pci:1; /* true: PCI USB host 0, false: USBHS */ + /* USB channel 2 configuration */ + bool chan2_pci:1; /* true: PCI USB host 2, false: USBSS */ +}; + +#endif |