diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/i2c-nomadik.h | 39 | ||||
| -rw-r--r-- | include/linux/platform_data/lp855x.h | 125 | ||||
| -rw-r--r-- | include/linux/platform_data/lp8727.h | 65 | ||||
| -rw-r--r-- | include/linux/platform_data/mv_usb.h | 9 |
4 files changed, 229 insertions, 9 deletions
diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h new file mode 100644 index 00000000000..c2303c3e480 --- /dev/null +++ b/include/linux/platform_data/i2c-nomadik.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ +#ifndef __PDATA_I2C_NOMADIK_H +#define __PDATA_I2C_NOMADIK_H + +enum i2c_freq_mode { + I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ + I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ + I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ + I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ +}; + +/** + * struct nmk_i2c_controller - client specific controller configuration + * @clk_freq: clock frequency for the operation mode + * @slsu: Slave data setup time in ns. + * The needed setup time for three modes of operation + * are 250ns, 100ns and 10ns respectively thus leading + * to the values of 14, 6, 2 for a 48 MHz i2c clk + * @tft: Tx FIFO Threshold in bytes + * @rft: Rx FIFO Threshold in bytes + * @timeout Slave response timeout(ms) + * @sm: speed mode + */ +struct nmk_i2c_controller { + unsigned long clk_freq; + unsigned short slsu; + unsigned char tft; + unsigned char rft; + int timeout; + enum i2c_freq_mode sm; +}; + +#endif /* __PDATA_I2C_NOMADIK_H */ diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h new file mode 100644 index 00000000000..cc76f1f18f1 --- /dev/null +++ b/include/linux/platform_data/lp855x.h @@ -0,0 +1,125 @@ +/* + * LP855x Backlight Driver + * + * Copyright (C) 2011 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP855X_H +#define _LP855X_H + +#define BL_CTL_SHFT (0) +#define BRT_MODE_SHFT (1) +#define BRT_MODE_MASK (0x06) + +/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */ +#define ENABLE_BL (1) +#define DISABLE_BL (0) + +#define I2C_CONFIG(id) id ## _I2C_CONFIG +#define PWM_CONFIG(id) id ## _PWM_CONFIG + +/* DEVICE CONTROL register - LP8550 */ +#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT) +#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8550_I2C_ONLY << BRT_MODE_SHFT)) + +/* DEVICE CONTROL register - LP8551 */ +#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8552 */ +#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8553 */ +#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8556 */ +#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) +#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) +#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8556_I2C_ONLY << BRT_MODE_SHFT)) +#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) + +enum lp855x_chip_id { + LP8550, + LP8551, + LP8552, + LP8553, + LP8556, +}; + +enum lp855x_brightness_ctrl_mode { + PWM_BASED = 1, + REGISTER_BASED, +}; + +enum lp8550_brighntess_source { + LP8550_PWM_ONLY, + LP8550_I2C_ONLY = 2, +}; + +enum lp8551_brighntess_source { + LP8551_PWM_ONLY = LP8550_PWM_ONLY, + LP8551_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8552_brighntess_source { + LP8552_PWM_ONLY = LP8550_PWM_ONLY, + LP8552_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8553_brighntess_source { + LP8553_PWM_ONLY = LP8550_PWM_ONLY, + LP8553_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8556_brightness_source { + LP8556_PWM_ONLY, + LP8556_COMBINED1, /* pwm + i2c before the shaper block */ + LP8556_I2C_ONLY, + LP8556_COMBINED2, /* pwm + i2c after the shaper block */ +}; + +struct lp855x_pwm_data { + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (int max_brightness); +}; + +struct lp855x_rom_data { + u8 addr; + u8 val; +}; + +/** + * struct lp855x_platform_data + * @name : Backlight driver name. If it is not defined, default name is set. + * @mode : brightness control by pwm or lp855x register + * @device_control : value of DEVICE CONTROL register + * @initial_brightness : initial value of backlight brightness + * @pwm_data : platform specific pwm generation functions. + Only valid when mode is PWM_BASED. + * @load_new_rom_data : + 0 : use default configuration data + 1 : update values of eeprom or eprom registers on loading driver + * @size_program : total size of lp855x_rom_data + * @rom_data : list of new eeprom/eprom registers + */ +struct lp855x_platform_data { + char *name; + enum lp855x_brightness_ctrl_mode mode; + u8 device_control; + int initial_brightness; + struct lp855x_pwm_data pwm_data; + u8 load_new_rom_data; + int size_program; + struct lp855x_rom_data *rom_data; +}; + +#endif diff --git a/include/linux/platform_data/lp8727.h b/include/linux/platform_data/lp8727.h new file mode 100644 index 00000000000..ea98c6133d3 --- /dev/null +++ b/include/linux/platform_data/lp8727.h @@ -0,0 +1,65 @@ +/* + * LP8727 Micro/Mini USB IC with integrated charger + * + * Copyright (C) 2011 Texas Instruments + * Copyright (C) 2011 National Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LP8727_H +#define _LP8727_H + +enum lp8727_eoc_level { + EOC_5P, + EOC_10P, + EOC_16P, + EOC_20P, + EOC_25P, + EOC_33P, + EOC_50P, +}; + +enum lp8727_ichg { + ICHG_90mA, + ICHG_100mA, + ICHG_400mA, + ICHG_450mA, + ICHG_500mA, + ICHG_600mA, + ICHG_700mA, + ICHG_800mA, + ICHG_900mA, + ICHG_1000mA, +}; + +/** + * struct lp8727_chg_param + * @eoc_level : end of charge level setting + * @ichg : charging current + */ +struct lp8727_chg_param { + enum lp8727_eoc_level eoc_level; + enum lp8727_ichg ichg; +}; + +/** + * struct lp8727_platform_data + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) + * @get_batt_capacity : get battery capacity (%) + * @get_batt_temp : get battery temperature + * @ac, @usb : charging parameters each charger type + */ +struct lp8727_platform_data { + u8 (*get_batt_present)(void); + u16 (*get_batt_level)(void); + u8 (*get_batt_capacity)(void); + u8 (*get_batt_temp)(void); + struct lp8727_chg_param ac; + struct lp8727_chg_param usb; +}; + +#endif diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index d94804aca76..944b01dd103 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -52,13 +52,4 @@ struct mv_usb_platform_data { int (*set_vbus)(unsigned int vbus); int (*private_init)(void __iomem *opregs, void __iomem *phyregs); }; - -#ifndef CONFIG_HAVE_CLK -/* Dummy stub for clk framework */ -#define clk_get(dev, id) NULL -#define clk_put(clock) do {} while (0) -#define clk_enable(clock) do {} while (0) -#define clk_disable(clock) do {} while (0) -#endif - #endif |