diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/brcmfmac-sdio.h | 5 | ||||
| -rw-r--r-- | include/linux/platform_data/cyttsp4.h | 76 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-atmel.h | 4 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-imx.h | 6 | ||||
| -rw-r--r-- | include/linux/platform_data/keypad-pxa27x.h | 3 | ||||
| -rw-r--r-- | include/linux/platform_data/mmc-esdhc-imx.h | 1 | ||||
| -rw-r--r-- | include/linux/platform_data/mmc-pxamci.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/net-cw1200.h | 81 | ||||
| -rw-r--r-- | include/linux/platform_data/pwm-renesas-tpu.h | 16 | ||||
| -rw-r--r-- | include/linux/platform_data/rcar-du.h | 54 | ||||
| -rw-r--r-- | include/linux/platform_data/remoteproc-omap.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/ti_am335x_adc.h | 14 |
12 files changed, 242 insertions, 22 deletions
diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h index 1ade657d5fc..b7174998c24 100644 --- a/include/linux/platform_data/brcmfmac-sdio.h +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -90,6 +90,10 @@ void __init brcmfmac_init_pdata(void) * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are * used for registering the irq using request_irq function. * + * broken_sg_support: flag for broken sg list support of SDIO host controller. + * Set this to true if the SDIO host controller has higher align requirement + * than 32 bytes for each scatterlist item. + * * power_on: This function is called by the brcmfmac when the module gets * loaded. This can be particularly useful for low power devices. The platform * spcific routine may for example decide to power up the complete device. @@ -116,6 +120,7 @@ struct brcmfmac_sdio_platform_data { bool oob_irq_supported; unsigned int oob_irq_nr; unsigned long oob_irq_flags; + bool broken_sg_support; void (*power_on)(void); void (*power_off)(void); void (*reset)(void); diff --git a/include/linux/platform_data/cyttsp4.h b/include/linux/platform_data/cyttsp4.h new file mode 100644 index 00000000000..6eba54aff1d --- /dev/null +++ b/include/linux/platform_data/cyttsp4.h @@ -0,0 +1,76 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) + * + */ +#ifndef _CYTTSP4_H_ +#define _CYTTSP4_H_ + +#define CYTTSP4_MT_NAME "cyttsp4_mt" +#define CYTTSP4_I2C_NAME "cyttsp4_i2c_adapter" +#define CYTTSP4_SPI_NAME "cyttsp4_spi_adapter" + +#define CY_TOUCH_SETTINGS_MAX 32 + +struct touch_framework { + const uint16_t *abs; + uint8_t size; + uint8_t enable_vkeys; +} __packed; + +struct cyttsp4_mt_platform_data { + struct touch_framework *frmwrk; + unsigned short flags; + char const *inp_dev_name; +}; + +struct touch_settings { + const uint8_t *data; + uint32_t size; + uint8_t tag; +} __packed; + +struct cyttsp4_core_platform_data { + int irq_gpio; + int rst_gpio; + int level_irq_udelay; + int (*xres)(struct cyttsp4_core_platform_data *pdata, + struct device *dev); + int (*init)(struct cyttsp4_core_platform_data *pdata, + int on, struct device *dev); + int (*power)(struct cyttsp4_core_platform_data *pdata, + int on, struct device *dev, atomic_t *ignore_irq); + int (*irq_stat)(struct cyttsp4_core_platform_data *pdata, + struct device *dev); + struct touch_settings *sett[CY_TOUCH_SETTINGS_MAX]; +}; + +struct cyttsp4_platform_data { + struct cyttsp4_core_platform_data *core_pdata; + struct cyttsp4_mt_platform_data *mt_pdata; +}; + +#endif /* _CYTTSP4_H_ */ diff --git a/include/linux/platform_data/dma-atmel.h b/include/linux/platform_data/dma-atmel.h index cab0997be3d..e95f19c6587 100644 --- a/include/linux/platform_data/dma-atmel.h +++ b/include/linux/platform_data/dma-atmel.h @@ -35,16 +35,20 @@ struct at_dma_slave { /* Platform-configurable bits in CFG */ +#define ATC_PER_MSB(h) ((0x30U & (h)) >> 4) /* Extract most significant bits of a handshaking identifier */ + #define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ #define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ #define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ #define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ #define ATC_SRC_H2SEL_SW (0x0 << 9) #define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_SRC_PER_MSB(h) (ATC_PER_MSB(h) << 10) /* Channel src rq (most significant bits) */ #define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ #define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ #define ATC_DST_H2SEL_SW (0x0 << 13) #define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_DST_PER_MSB(h) (ATC_PER_MSB(h) << 14) /* Channel dst rq (most significant bits) */ #define ATC_SOD (0x1 << 16) /* Stop On Done */ #define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ #define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index f6d30cc1cb7..beac6b8b6a7 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -60,10 +60,8 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { - return strstr(dev_name(chan->device->dev), "sdma") || - !strcmp(dev_name(chan->device->dev), "imx1-dma") || - !strcmp(dev_name(chan->device->dev), "imx21-dma") || - !strcmp(dev_name(chan->device->dev), "imx27-dma"); + return !strcmp(chan->device->dev->driver->name, "imx-sdma") || + !strcmp(chan->device->dev->driver->name, "imx-dma"); } #endif diff --git a/include/linux/platform_data/keypad-pxa27x.h b/include/linux/platform_data/keypad-pxa27x.h index 5ce8d5e6ea5..24625569d16 100644 --- a/include/linux/platform_data/keypad-pxa27x.h +++ b/include/linux/platform_data/keypad-pxa27x.h @@ -36,10 +36,9 @@ struct pxa27x_keypad_platform_data { /* code map for the matrix keys */ + const struct matrix_keymap_data *matrix_keymap_data; unsigned int matrix_key_rows; unsigned int matrix_key_cols; - unsigned int *matrix_key_map; - int matrix_key_map_size; /* direct keys */ int direct_key_num; diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index b4a0521ce41..d44912d8157 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -40,5 +40,6 @@ struct esdhc_platform_data { enum wp_types wp_type; enum cd_types cd_type; int max_bus_width; + unsigned int f_max; }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h index 9eb515bb799..1706b3597ce 100644 --- a/include/linux/platform_data/mmc-pxamci.h +++ b/include/linux/platform_data/mmc-pxamci.h @@ -12,7 +12,7 @@ struct pxamci_platform_data { unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */ int (*init)(struct device *, irq_handler_t , void *); int (*get_ro)(struct device *); - void (*setpower)(struct device *, unsigned int); + int (*setpower)(struct device *, unsigned int); void (*exit)(struct device *, void *); int gpio_card_detect; /* gpio detecting card insertion */ int gpio_card_ro; /* gpio detecting read only toggle */ diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h new file mode 100644 index 00000000000..c6fbc3ce4ab --- /dev/null +++ b/include/linux/platform_data/net-cw1200.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CW1200_PLAT_H_INCLUDED +#define CW1200_PLAT_H_INCLUDED + +struct cw1200_platform_data_spi { + u8 spi_bits_per_word; /* REQUIRED */ + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +struct cw1200_platform_data_sdio { + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int irq; /* IRQ line or 0 to use SDIO IRQ */ + int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); + +#endif /* CW1200_PLAT_H_INCLUDED */ diff --git a/include/linux/platform_data/pwm-renesas-tpu.h b/include/linux/platform_data/pwm-renesas-tpu.h new file mode 100644 index 00000000000..a7220b10dda --- /dev/null +++ b/include/linux/platform_data/pwm-renesas-tpu.h @@ -0,0 +1,16 @@ +#ifndef __PWM_RENESAS_TPU_H__ +#define __PWM_RENESAS_TPU_H__ + +#include <linux/pwm.h> + +#define TPU_CHANNEL_MAX 4 + +struct tpu_pwm_channel_data { + enum pwm_polarity polarity; +}; + +struct tpu_pwm_platform_data { + struct tpu_pwm_channel_data channels[TPU_CHANNEL_MAX]; +}; + +#endif /* __PWM_RENESAS_TPU_H__ */ diff --git a/include/linux/platform_data/rcar-du.h b/include/linux/platform_data/rcar-du.h new file mode 100644 index 00000000000..80587fdbba3 --- /dev/null +++ b/include/linux/platform_data/rcar-du.h @@ -0,0 +1,54 @@ +/* + * rcar_du.h -- R-Car Display Unit DRM driver + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __RCAR_DU_H__ +#define __RCAR_DU_H__ + +#include <drm/drm_mode.h> + +enum rcar_du_encoder_type { + RCAR_DU_ENCODER_UNUSED = 0, + RCAR_DU_ENCODER_VGA, + RCAR_DU_ENCODER_LVDS, +}; + +struct rcar_du_panel_data { + unsigned int width_mm; /* Panel width in mm */ + unsigned int height_mm; /* Panel height in mm */ + struct drm_mode_modeinfo mode; +}; + +struct rcar_du_encoder_lvds_data { + struct rcar_du_panel_data panel; +}; + +struct rcar_du_encoder_vga_data { + /* TODO: Add DDC information for EDID retrieval */ +}; + +struct rcar_du_encoder_data { + enum rcar_du_encoder_type encoder; + unsigned int output; + + union { + struct rcar_du_encoder_lvds_data lvds; + struct rcar_du_encoder_vga_data vga; + } u; +}; + +struct rcar_du_platform_data { + struct rcar_du_encoder_data *encoders; + unsigned int num_encoders; +}; + +#endif /* __RCAR_DU_H__ */ diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h index 3c1c6444ec4..bfbd12b4116 100644 --- a/include/linux/platform_data/remoteproc-omap.h +++ b/include/linux/platform_data/remoteproc-omap.h @@ -50,7 +50,7 @@ void __init omap_rproc_reserve_cma(void); #else -void __init omap_rproc_reserve_cma(void) +static inline void __init omap_rproc_reserve_cma(void) { } diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h deleted file mode 100644 index e41d5834cb8..00000000000 --- a/include/linux/platform_data/ti_am335x_adc.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __LINUX_TI_AM335X_ADC_H -#define __LINUX_TI_AM335X_ADC_H - -/** - * struct adc_data ADC Input information - * @adc_channels: Number of analog inputs - * available for ADC. - */ - -struct adc_data { - unsigned int adc_channels; -}; - -#endif |