diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/i2c-cbus-gpio.h | 27 | ||||
| -rw-r--r-- | include/linux/platform_data/iommu-omap.h | 9 | ||||
| -rw-r--r-- | include/linux/platform_data/lp855x.h | 9 | ||||
| -rw-r--r-- | include/linux/platform_data/mtd-nomadik-nand.h | 16 | ||||
| -rw-r--r-- | include/linux/platform_data/serial-omap.h | 51 | ||||
| -rw-r--r-- | include/linux/platform_data/ti_am335x_adc.h | 14 | ||||
| -rw-r--r-- | include/linux/platform_data/usb-omap.h | 3 |
7 files changed, 104 insertions, 25 deletions
diff --git a/include/linux/platform_data/i2c-cbus-gpio.h b/include/linux/platform_data/i2c-cbus-gpio.h new file mode 100644 index 00000000000..6faa992a950 --- /dev/null +++ b/include/linux/platform_data/i2c-cbus-gpio.h @@ -0,0 +1,27 @@ +/* + * i2c-cbus-gpio.h - CBUS I2C platform_data definition + * + * Copyright (C) 2004-2009 Nokia Corporation + * + * Written by Felipe Balbi and Aaro Koskinen. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __INCLUDE_LINUX_I2C_CBUS_GPIO_H +#define __INCLUDE_LINUX_I2C_CBUS_GPIO_H + +struct i2c_cbus_platform_data { + int dat_gpio; + int clk_gpio; + int sel_gpio; +}; + +#endif /* __INCLUDE_LINUX_I2C_CBUS_GPIO_H */ diff --git a/include/linux/platform_data/iommu-omap.h b/include/linux/platform_data/iommu-omap.h index c677b9f2fef..5b429c43a29 100644 --- a/include/linux/platform_data/iommu-omap.h +++ b/include/linux/platform_data/iommu-omap.h @@ -10,6 +10,8 @@ * published by the Free Software Foundation. */ +#include <linux/platform_device.h> + #define MMU_REG_SIZE 256 /** @@ -42,8 +44,11 @@ struct omap_mmu_dev_attr { struct iommu_platform_data { const char *name; - const char *clk_name; - const int nr_tlb_entries; + const char *reset_name; + int nr_tlb_entries; u32 da_start; u32 da_end; + + int (*assert_reset)(struct platform_device *pdev, const char *name); + int (*deassert_reset)(struct platform_device *pdev, const char *name); }; diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index 761f3175236..e81f62d24ee 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -89,11 +89,6 @@ enum lp8556_brightness_source { LP8556_COMBINED2, /* pwm + i2c after the shaper block */ }; -struct lp855x_pwm_data { - void (*pwm_set_intensity) (int brightness, int max_brightness); - int (*pwm_get_intensity) (int max_brightness); -}; - struct lp855x_rom_data { u8 addr; u8 val; @@ -105,7 +100,7 @@ struct lp855x_rom_data { * @mode : brightness control by pwm or lp855x register * @device_control : value of DEVICE CONTROL register * @initial_brightness : initial value of backlight brightness - * @pwm_data : platform specific pwm generation functions. + * @period_ns : platform specific pwm period value. unit is nano. Only valid when mode is PWM_BASED. * @load_new_rom_data : 0 : use default configuration data @@ -118,7 +113,7 @@ struct lp855x_platform_data { enum lp855x_brightness_ctrl_mode mode; u8 device_control; int initial_brightness; - struct lp855x_pwm_data pwm_data; + unsigned int period_ns; u8 load_new_rom_data; int size_program; struct lp855x_rom_data *rom_data; diff --git a/include/linux/platform_data/mtd-nomadik-nand.h b/include/linux/platform_data/mtd-nomadik-nand.h deleted file mode 100644 index c3c8254c22a..00000000000 --- a/include/linux/platform_data/mtd-nomadik-nand.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_ARCH_NAND_H -#define __ASM_ARCH_NAND_H - -struct nomadik_nand_platform_data { - struct mtd_partition *parts; - int nparts; - int options; - int (*init) (void); - int (*exit) (void); -}; - -#define NAND_IO_DATA 0x40000000 -#define NAND_IO_CMD 0x40800000 -#define NAND_IO_ADDR 0x41000000 - -#endif /* __ASM_ARCH_NAND_H */ diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h new file mode 100644 index 00000000000..ff9b0aab528 --- /dev/null +++ b/include/linux/platform_data/serial-omap.h @@ -0,0 +1,51 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R <govindraj.raja@ti.com> + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __OMAP_SERIAL_H__ +#define __OMAP_SERIAL_H__ + +#include <linux/serial_core.h> +#include <linux/device.h> +#include <linux/pm_qos.h> + +#define DRIVER_NAME "omap_uart" + +/* + * Use tty device name as ttyO, [O -> OMAP] + * in bootargs we specify as console=ttyO0 if uart1 + * is used as console uart. + */ +#define OMAP_SERIAL_NAME "ttyO" + +struct omap_uart_port_info { + bool dma_enabled; /* To specify DMA Mode */ + unsigned int uartclk; /* UART clock rate */ + upf_t flags; /* UPF_* flags */ + unsigned int dma_rx_buf_size; + unsigned int dma_rx_timeout; + unsigned int autosuspend_timeout; + unsigned int dma_rx_poll_rate; + int DTR_gpio; + int DTR_inverted; + int DTR_present; + + int (*get_context_loss_count)(struct device *); + void (*set_forceidle)(struct device *); + void (*set_noidle)(struct device *); + void (*enable_wakeup)(struct device *, bool); +}; + +#endif /* __OMAP_SERIAL_H__ */ diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h new file mode 100644 index 00000000000..e41d5834cb8 --- /dev/null +++ b/include/linux/platform_data/ti_am335x_adc.h @@ -0,0 +1,14 @@ +#ifndef __LINUX_TI_AM335X_ADC_H +#define __LINUX_TI_AM335X_ADC_H + +/** + * struct adc_data ADC Input information + * @adc_channels: Number of analog inputs + * available for ADC. + */ + +struct adc_data { + unsigned int adc_channels; +}; + +#endif diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h index 8570bcfe631..ef65b67c56c 100644 --- a/include/linux/platform_data/usb-omap.h +++ b/include/linux/platform_data/usb-omap.h @@ -59,6 +59,9 @@ struct usbhs_omap_platform_data { struct ehci_hcd_omap_platform_data *ehci_data; struct ohci_hcd_omap_platform_data *ohci_data; + + /* OMAP3 <= ES2.1 have a single ulpi bypass control bit */ + unsigned single_ulpi_bypass:1; }; /*-------------------------------------------------------------------------*/ |