diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/bfin_rotary.h | 117 | ||||
| -rw-r--r-- | include/linux/platform_data/cpuidle-exynos.h | 20 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-dw.h | 6 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-mmp_tdma.h | 7 | ||||
| -rw-r--r-- | include/linux/platform_data/ipmmu-vmsa.h | 24 | ||||
| -rw-r--r-- | include/linux/platform_data/irda-sa11x0.h | 20 | ||||
| -rw-r--r-- | include/linux/platform_data/mmc-omap.h | 4 | ||||
| -rw-r--r-- | include/linux/platform_data/regulator-haptic.h | 29 | ||||
| -rw-r--r-- | include/linux/platform_data/st21nfca.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/st21nfcb.h | 4 | ||||
| -rw-r--r-- | include/linux/platform_data/tpm_stm_st33.h | 39 | ||||
| -rw-r--r-- | include/linux/platform_data/vsp1.h | 27 |
12 files changed, 239 insertions, 60 deletions
diff --git a/include/linux/platform_data/bfin_rotary.h b/include/linux/platform_data/bfin_rotary.h new file mode 100644 index 00000000000..98829370fee --- /dev/null +++ b/include/linux/platform_data/bfin_rotary.h @@ -0,0 +1,117 @@ +/* + * board initialization should put one of these structures into platform_data + * and place the bfin-rotary onto platform_bus named "bfin-rotary". + * + * Copyright 2008-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _BFIN_ROTARY_H +#define _BFIN_ROTARY_H + +/* mode bitmasks */ +#define ROT_QUAD_ENC CNTMODE_QUADENC /* quadrature/grey code encoder mode */ +#define ROT_BIN_ENC CNTMODE_BINENC /* binary encoder mode */ +#define ROT_UD_CNT CNTMODE_UDCNT /* rotary counter mode */ +#define ROT_DIR_CNT CNTMODE_DIRCNT /* direction counter mode */ + +#define ROT_DEBE DEBE /* Debounce Enable */ + +#define ROT_CDGINV CDGINV /* CDG Pin Polarity Invert */ +#define ROT_CUDINV CUDINV /* CUD Pin Polarity Invert */ +#define ROT_CZMINV CZMINV /* CZM Pin Polarity Invert */ + +struct bfin_rotary_platform_data { + /* set rotary UP KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_up_key; + /* set rotary DOWN KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_down_key; + /* set rotary BUTTON KEY_### or BTN_### */ + unsigned int rotary_button_key; + /* set rotary Relative Axis REL_### in case you prefer + * bfin-rotary to send EV_REL otherwise set 0 + */ + unsigned int rotary_rel_code; + unsigned short debounce; /* 0..17 */ + unsigned short mode; + unsigned short pm_wakeup; + unsigned short *pin_list; +}; + +/* CNT_CONFIG bitmasks */ +#define CNTE (1 << 0) /* Counter Enable */ +#define DEBE (1 << 1) /* Debounce Enable */ +#define CDGINV (1 << 4) /* CDG Pin Polarity Invert */ +#define CUDINV (1 << 5) /* CUD Pin Polarity Invert */ +#define CZMINV (1 << 6) /* CZM Pin Polarity Invert */ +#define CNTMODE_SHIFT 8 +#define CNTMODE (0x7 << CNTMODE_SHIFT) /* Counter Operating Mode */ +#define ZMZC (1 << 1) /* CZM Zeroes Counter Enable */ +#define BNDMODE_SHIFT 12 +#define BNDMODE (0x3 << BNDMODE_SHIFT) /* Boundary register Mode */ +#define INPDIS (1 << 15) /* CUG and CDG Input Disable */ + +#define CNTMODE_QUADENC (0 << CNTMODE_SHIFT) /* quadrature encoder mode */ +#define CNTMODE_BINENC (1 << CNTMODE_SHIFT) /* binary encoder mode */ +#define CNTMODE_UDCNT (2 << CNTMODE_SHIFT) /* up/down counter mode */ +#define CNTMODE_DIRCNT (4 << CNTMODE_SHIFT) /* direction counter mode */ +#define CNTMODE_DIRTMR (5 << CNTMODE_SHIFT) /* direction timer mode */ + +#define BNDMODE_COMP (0 << BNDMODE_SHIFT) /* boundary compare mode */ +#define BNDMODE_ZERO (1 << BNDMODE_SHIFT) /* boundary compare and zero mode */ +#define BNDMODE_CAPT (2 << BNDMODE_SHIFT) /* boundary capture mode */ +#define BNDMODE_AEXT (3 << BNDMODE_SHIFT) /* boundary auto-extend mode */ + +/* CNT_IMASK bitmasks */ +#define ICIE (1 << 0) /* Illegal Gray/Binary Code Interrupt Enable */ +#define UCIE (1 << 1) /* Up count Interrupt Enable */ +#define DCIE (1 << 2) /* Down count Interrupt Enable */ +#define MINCIE (1 << 3) /* Min Count Interrupt Enable */ +#define MAXCIE (1 << 4) /* Max Count Interrupt Enable */ +#define COV31IE (1 << 5) /* Bit 31 Overflow Interrupt Enable */ +#define COV15IE (1 << 6) /* Bit 15 Overflow Interrupt Enable */ +#define CZEROIE (1 << 7) /* Count to Zero Interrupt Enable */ +#define CZMIE (1 << 8) /* CZM Pin Interrupt Enable */ +#define CZMEIE (1 << 9) /* CZM Error Interrupt Enable */ +#define CZMZIE (1 << 10) /* CZM Zeroes Counter Interrupt Enable */ + +/* CNT_STATUS bitmasks */ +#define ICII (1 << 0) /* Illegal Gray/Binary Code Interrupt Identifier */ +#define UCII (1 << 1) /* Up count Interrupt Identifier */ +#define DCII (1 << 2) /* Down count Interrupt Identifier */ +#define MINCII (1 << 3) /* Min Count Interrupt Identifier */ +#define MAXCII (1 << 4) /* Max Count Interrupt Identifier */ +#define COV31II (1 << 5) /* Bit 31 Overflow Interrupt Identifier */ +#define COV15II (1 << 6) /* Bit 15 Overflow Interrupt Identifier */ +#define CZEROII (1 << 7) /* Count to Zero Interrupt Identifier */ +#define CZMII (1 << 8) /* CZM Pin Interrupt Identifier */ +#define CZMEII (1 << 9) /* CZM Error Interrupt Identifier */ +#define CZMZII (1 << 10) /* CZM Zeroes Counter Interrupt Identifier */ + +/* CNT_COMMAND bitmasks */ +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE (1 << 12) /* Enable CZM Clear Counter Once */ + +#define W1LCNT_ZERO (1 << 0) /* write 1 to load CNT_COUNTER with zero */ +#define W1LCNT_MIN (1 << 2) /* write 1 to load CNT_COUNTER from CNT_MIN */ +#define W1LCNT_MAX (1 << 3) /* write 1 to load CNT_COUNTER from CNT_MAX */ + +#define W1LMIN_ZERO (1 << 4) /* write 1 to load CNT_MIN with zero */ +#define W1LMIN_CNT (1 << 5) /* write 1 to load CNT_MIN from CNT_COUNTER */ +#define W1LMIN_MAX (1 << 7) /* write 1 to load CNT_MIN from CNT_MAX */ + +#define W1LMAX_ZERO (1 << 8) /* write 1 to load CNT_MAX with zero */ +#define W1LMAX_CNT (1 << 9) /* write 1 to load CNT_MAX from CNT_COUNTER */ +#define W1LMAX_MIN (1 << 10) /* write 1 to load CNT_MAX from CNT_MIN */ + +/* CNT_DEBOUNCE bitmasks */ +#define DPRESCALE 0xf /* Load Counter Register */ + +#endif diff --git a/include/linux/platform_data/cpuidle-exynos.h b/include/linux/platform_data/cpuidle-exynos.h new file mode 100644 index 00000000000..bfa40e4c5d5 --- /dev/null +++ b/include/linux/platform_data/cpuidle-exynos.h @@ -0,0 +1,20 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __CPUIDLE_EXYNOS_H +#define __CPUIDLE_EXYNOS_H + +struct cpuidle_exynos_data { + int (*cpu0_enter_aftr)(void); + int (*cpu1_powerdown)(void); + void (*pre_enter_aftr)(void); + void (*post_enter_aftr)(void); +}; + +#endif diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index d8155c00524..87ac14c584f 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -13,10 +13,12 @@ #include <linux/device.h> +#define DW_DMA_MAX_NR_MASTERS 4 + /** * struct dw_dma_slave - Controller-specific information about a slave * - * @dma_dev: required DMA master device. Depricated. + * @dma_dev: required DMA master device * @src_id: src request line * @dst_id: dst request line * @src_master: src master for transfers on allocated channel. @@ -53,7 +55,7 @@ struct dw_dma_platform_data { unsigned char chan_priority; unsigned short block_size; unsigned char nr_masters; - unsigned char data_width[4]; + unsigned char data_width[DW_DMA_MAX_NR_MASTERS]; }; #endif /* _PLATFORM_DATA_DMA_DW_H */ diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h index 66574ea39f9..0c72886030e 100644 --- a/include/linux/platform_data/dma-mmp_tdma.h +++ b/include/linux/platform_data/dma-mmp_tdma.h @@ -28,6 +28,13 @@ struct sram_platdata { int granularity; }; +#ifdef CONFIG_ARM extern struct gen_pool *sram_get_gpool(char *pool_name); +#else +static inline struct gen_pool *sram_get_gpool(char *pool_name) +{ + return NULL; +} +#endif #endif /* __DMA_MMP_TDMA_H */ diff --git a/include/linux/platform_data/ipmmu-vmsa.h b/include/linux/platform_data/ipmmu-vmsa.h deleted file mode 100644 index 5275b3ac6d3..00000000000 --- a/include/linux/platform_data/ipmmu-vmsa.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * IPMMU VMSA Platform Data - * - * Copyright (C) 2014 Renesas Electronics Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - */ - -#ifndef __IPMMU_VMSA_H__ -#define __IPMMU_VMSA_H__ - -struct ipmmu_vmsa_master { - const char *name; - unsigned int utlb; -}; - -struct ipmmu_vmsa_platform_data { - const struct ipmmu_vmsa_master *masters; - unsigned int num_masters; -}; - -#endif /* __IPMMU_VMSA_H__ */ diff --git a/include/linux/platform_data/irda-sa11x0.h b/include/linux/platform_data/irda-sa11x0.h new file mode 100644 index 00000000000..38f77b5e56c --- /dev/null +++ b/include/linux/platform_data/irda-sa11x0.h @@ -0,0 +1,20 @@ +/* + * arch/arm/include/asm/mach/irda.h + * + * Copyright (C) 2004 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_MACH_IRDA_H +#define __ASM_ARM_MACH_IRDA_H + +struct irda_platform_data { + int (*startup)(struct device *); + void (*shutdown)(struct device *); + int (*set_power)(struct device *, unsigned int state); + void (*set_speed)(struct device *, unsigned int speed); +}; + +#endif diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 5c188f4e9be..92946929140 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -31,10 +31,6 @@ struct omap_mmc_platform_data { void (*cleanup)(struct device *dev); void (*shutdown)(struct device *dev); - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - /* Return context loss count due to PM states changing */ int (*get_context_loss_count)(struct device *dev); diff --git a/include/linux/platform_data/regulator-haptic.h b/include/linux/platform_data/regulator-haptic.h new file mode 100644 index 00000000000..5658e58e073 --- /dev/null +++ b/include/linux/platform_data/regulator-haptic.h @@ -0,0 +1,29 @@ +/* + * Regulator Haptic Platform Data + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Jaewon Kim <jaewon02.kim@samsung.com> + * Author: Hyunhee Kim <hyunhee.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _REGULATOR_HAPTIC_H +#define _REGULATOR_HAPTIC_H + +/* + * struct regulator_haptic_data - Platform device data + * + * @max_volt: maximum voltage value supplied to the haptic motor. + * <The unit of the voltage is a micro> + * @min_volt: minimum voltage value supplied to the haptic motor. + * <The unit of the voltage is a micro> + */ +struct regulator_haptic_data { + unsigned int max_volt; + unsigned int min_volt; +}; + +#endif /* _REGULATOR_HAPTIC_H */ diff --git a/include/linux/platform_data/st21nfca.h b/include/linux/platform_data/st21nfca.h index 5087fff96d8..cc2bdafb0c6 100644 --- a/include/linux/platform_data/st21nfca.h +++ b/include/linux/platform_data/st21nfca.h @@ -26,6 +26,8 @@ struct st21nfca_nfc_platform_data { unsigned int gpio_ena; unsigned int irq_polarity; + bool is_ese_present; + bool is_uicc_present; }; #endif /* _ST21NFCA_HCI_H_ */ diff --git a/include/linux/platform_data/st21nfcb.h b/include/linux/platform_data/st21nfcb.h index c3b432f5b63..b023373d987 100644 --- a/include/linux/platform_data/st21nfcb.h +++ b/include/linux/platform_data/st21nfcb.h @@ -19,8 +19,6 @@ #ifndef _ST21NFCB_NCI_H_ #define _ST21NFCB_NCI_H_ -#include <linux/i2c.h> - #define ST21NFCB_NCI_DRIVER_NAME "st21nfcb_nci" struct st21nfcb_nfc_platform_data { @@ -28,4 +26,4 @@ struct st21nfcb_nfc_platform_data { unsigned int irq_polarity; }; -#endif /* _ST21NFCA_HCI_H_ */ +#endif /* _ST21NFCB_NCI_H_ */ diff --git a/include/linux/platform_data/tpm_stm_st33.h b/include/linux/platform_data/tpm_stm_st33.h new file mode 100644 index 00000000000..ff75310c0f4 --- /dev/null +++ b/include/linux/platform_data/tpm_stm_st33.h @@ -0,0 +1,39 @@ +/* + * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 + * Copyright (C) 2009, 2010 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + * STMicroelectronics version 1.2.0, Copyright (C) 2010 + * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. + * This is free software, and you are welcome to redistribute it + * under certain conditions. + * + * @Author: Christophe RICARD tpmsupport@st.com + * + * @File: stm_st33_tpm.h + * + * @Date: 09/15/2010 + */ +#ifndef __STM_ST33_TPM_H__ +#define __STM_ST33_TPM_H__ + +#define TPM_ST33_I2C "st33zp24-i2c" +#define TPM_ST33_SPI "st33zp24-spi" + +struct st33zp24_platform_data { + int io_lpcpd; +}; + +#endif /* __STM_ST33_TPM_H__ */ diff --git a/include/linux/platform_data/vsp1.h b/include/linux/platform_data/vsp1.h deleted file mode 100644 index 63170e2614b..00000000000 --- a/include/linux/platform_data/vsp1.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * vsp1.h -- R-Car VSP1 Platform Data - * - * Copyright (C) 2013 Renesas Corporation - * - * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef __PLATFORM_VSP1_H__ -#define __PLATFORM_VSP1_H__ - -#define VSP1_HAS_LIF (1 << 0) -#define VSP1_HAS_LUT (1 << 1) -#define VSP1_HAS_SRU (1 << 2) - -struct vsp1_platform_data { - unsigned int features; - unsigned int rpf_count; - unsigned int uds_count; - unsigned int wpf_count; -}; - -#endif /* __PLATFORM_VSP1_H__ */ |