diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/bfin_rotary.h | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/include/linux/platform_data/bfin_rotary.h b/include/linux/platform_data/bfin_rotary.h new file mode 100644 index 00000000000..98829370fee --- /dev/null +++ b/include/linux/platform_data/bfin_rotary.h @@ -0,0 +1,117 @@ +/* + * board initialization should put one of these structures into platform_data + * and place the bfin-rotary onto platform_bus named "bfin-rotary". + * + * Copyright 2008-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _BFIN_ROTARY_H +#define _BFIN_ROTARY_H + +/* mode bitmasks */ +#define ROT_QUAD_ENC CNTMODE_QUADENC /* quadrature/grey code encoder mode */ +#define ROT_BIN_ENC CNTMODE_BINENC /* binary encoder mode */ +#define ROT_UD_CNT CNTMODE_UDCNT /* rotary counter mode */ +#define ROT_DIR_CNT CNTMODE_DIRCNT /* direction counter mode */ + +#define ROT_DEBE DEBE /* Debounce Enable */ + +#define ROT_CDGINV CDGINV /* CDG Pin Polarity Invert */ +#define ROT_CUDINV CUDINV /* CUD Pin Polarity Invert */ +#define ROT_CZMINV CZMINV /* CZM Pin Polarity Invert */ + +struct bfin_rotary_platform_data { + /* set rotary UP KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_up_key; + /* set rotary DOWN KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_down_key; + /* set rotary BUTTON KEY_### or BTN_### */ + unsigned int rotary_button_key; + /* set rotary Relative Axis REL_### in case you prefer + * bfin-rotary to send EV_REL otherwise set 0 + */ + unsigned int rotary_rel_code; + unsigned short debounce; /* 0..17 */ + unsigned short mode; + unsigned short pm_wakeup; + unsigned short *pin_list; +}; + +/* CNT_CONFIG bitmasks */ +#define CNTE (1 << 0) /* Counter Enable */ +#define DEBE (1 << 1) /* Debounce Enable */ +#define CDGINV (1 << 4) /* CDG Pin Polarity Invert */ +#define CUDINV (1 << 5) /* CUD Pin Polarity Invert */ +#define CZMINV (1 << 6) /* CZM Pin Polarity Invert */ +#define CNTMODE_SHIFT 8 +#define CNTMODE (0x7 << CNTMODE_SHIFT) /* Counter Operating Mode */ +#define ZMZC (1 << 1) /* CZM Zeroes Counter Enable */ +#define BNDMODE_SHIFT 12 +#define BNDMODE (0x3 << BNDMODE_SHIFT) /* Boundary register Mode */ +#define INPDIS (1 << 15) /* CUG and CDG Input Disable */ + +#define CNTMODE_QUADENC (0 << CNTMODE_SHIFT) /* quadrature encoder mode */ +#define CNTMODE_BINENC (1 << CNTMODE_SHIFT) /* binary encoder mode */ +#define CNTMODE_UDCNT (2 << CNTMODE_SHIFT) /* up/down counter mode */ +#define CNTMODE_DIRCNT (4 << CNTMODE_SHIFT) /* direction counter mode */ +#define CNTMODE_DIRTMR (5 << CNTMODE_SHIFT) /* direction timer mode */ + +#define BNDMODE_COMP (0 << BNDMODE_SHIFT) /* boundary compare mode */ +#define BNDMODE_ZERO (1 << BNDMODE_SHIFT) /* boundary compare and zero mode */ +#define BNDMODE_CAPT (2 << BNDMODE_SHIFT) /* boundary capture mode */ +#define BNDMODE_AEXT (3 << BNDMODE_SHIFT) /* boundary auto-extend mode */ + +/* CNT_IMASK bitmasks */ +#define ICIE (1 << 0) /* Illegal Gray/Binary Code Interrupt Enable */ +#define UCIE (1 << 1) /* Up count Interrupt Enable */ +#define DCIE (1 << 2) /* Down count Interrupt Enable */ +#define MINCIE (1 << 3) /* Min Count Interrupt Enable */ +#define MAXCIE (1 << 4) /* Max Count Interrupt Enable */ +#define COV31IE (1 << 5) /* Bit 31 Overflow Interrupt Enable */ +#define COV15IE (1 << 6) /* Bit 15 Overflow Interrupt Enable */ +#define CZEROIE (1 << 7) /* Count to Zero Interrupt Enable */ +#define CZMIE (1 << 8) /* CZM Pin Interrupt Enable */ +#define CZMEIE (1 << 9) /* CZM Error Interrupt Enable */ +#define CZMZIE (1 << 10) /* CZM Zeroes Counter Interrupt Enable */ + +/* CNT_STATUS bitmasks */ +#define ICII (1 << 0) /* Illegal Gray/Binary Code Interrupt Identifier */ +#define UCII (1 << 1) /* Up count Interrupt Identifier */ +#define DCII (1 << 2) /* Down count Interrupt Identifier */ +#define MINCII (1 << 3) /* Min Count Interrupt Identifier */ +#define MAXCII (1 << 4) /* Max Count Interrupt Identifier */ +#define COV31II (1 << 5) /* Bit 31 Overflow Interrupt Identifier */ +#define COV15II (1 << 6) /* Bit 15 Overflow Interrupt Identifier */ +#define CZEROII (1 << 7) /* Count to Zero Interrupt Identifier */ +#define CZMII (1 << 8) /* CZM Pin Interrupt Identifier */ +#define CZMEII (1 << 9) /* CZM Error Interrupt Identifier */ +#define CZMZII (1 << 10) /* CZM Zeroes Counter Interrupt Identifier */ + +/* CNT_COMMAND bitmasks */ +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE (1 << 12) /* Enable CZM Clear Counter Once */ + +#define W1LCNT_ZERO (1 << 0) /* write 1 to load CNT_COUNTER with zero */ +#define W1LCNT_MIN (1 << 2) /* write 1 to load CNT_COUNTER from CNT_MIN */ +#define W1LCNT_MAX (1 << 3) /* write 1 to load CNT_COUNTER from CNT_MAX */ + +#define W1LMIN_ZERO (1 << 4) /* write 1 to load CNT_MIN with zero */ +#define W1LMIN_CNT (1 << 5) /* write 1 to load CNT_MIN from CNT_COUNTER */ +#define W1LMIN_MAX (1 << 7) /* write 1 to load CNT_MIN from CNT_MAX */ + +#define W1LMAX_ZERO (1 << 8) /* write 1 to load CNT_MAX with zero */ +#define W1LMAX_CNT (1 << 9) /* write 1 to load CNT_MAX from CNT_COUNTER */ +#define W1LMAX_MIN (1 << 10) /* write 1 to load CNT_MAX from CNT_MIN */ + +/* CNT_DEBOUNCE bitmasks */ +#define DPRESCALE 0xf /* Load Counter Register */ + +#endif |