diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/cpsw.h | 4 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-coh901318.h | 72 | ||||
| -rw-r--r-- | include/linux/platform_data/i2c-s3c2410.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/invensense_mpu6050.h | 31 | ||||
| -rw-r--r-- | include/linux/platform_data/lp8755.h | 71 | ||||
| -rw-r--r-- | include/linux/platform_data/max6697.h | 36 | ||||
| -rw-r--r-- | include/linux/platform_data/microread.h | 35 | ||||
| -rw-r--r-- | include/linux/platform_data/mtd-nand-omap2.h | 4 | ||||
| -rw-r--r-- | include/linux/platform_data/mtd-onenand-omap2.h | 3 | ||||
| -rw-r--r-- | include/linux/platform_data/s3c-hsotg.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/samsung-usbphy.h | 27 | ||||
| -rw-r--r-- | include/linux/platform_data/serial-sccnxp.h (renamed from include/linux/platform_data/sccnxp.h) | 6 | ||||
| -rw-r--r-- | include/linux/platform_data/spi-omap2-mcspi.h | 3 | ||||
| -rw-r--r-- | include/linux/platform_data/tsl2563.h | 8 | ||||
| -rw-r--r-- | include/linux/platform_data/usb3503.h | 19 |
15 files changed, 320 insertions, 3 deletions
diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h index 24368a2e8b8..798fb80b024 100644 --- a/include/linux/platform_data/cpsw.h +++ b/include/linux/platform_data/cpsw.h @@ -21,6 +21,8 @@ struct cpsw_slave_data { char phy_id[MII_BUS_ID_SIZE]; int phy_if; u8 mac_addr[ETH_ALEN]; + u16 dual_emac_res_vlan; /* Reserved VLAN for DualEMAC */ + }; struct cpsw_platform_data { @@ -35,6 +37,8 @@ struct cpsw_platform_data { u32 bd_ram_size; /*buffer descriptor ram size */ u32 rx_descs; /* Number of Rx Descriptios */ u32 mac_control; /* Mac control register */ + u16 default_vlan; /* Def VLAN for ALE lookup in VLAN aware mode*/ + bool dual_emac; /* Enable Dual EMAC mode */ }; #endif /* __CPSW_H__ */ diff --git a/include/linux/platform_data/dma-coh901318.h b/include/linux/platform_data/dma-coh901318.h new file mode 100644 index 00000000000..c4cb9590d11 --- /dev/null +++ b/include/linux/platform_data/dma-coh901318.h @@ -0,0 +1,72 @@ +/* + * Platform data for the COH901318 DMA controller + * Copyright (C) 2007-2013 ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef PLAT_COH901318_H +#define PLAT_COH901318_H + +#ifdef CONFIG_COH901318 + +/* We only support the U300 DMA channels */ +#define U300_DMA_MSL_TX_0 0 +#define U300_DMA_MSL_TX_1 1 +#define U300_DMA_MSL_TX_2 2 +#define U300_DMA_MSL_TX_3 3 +#define U300_DMA_MSL_TX_4 4 +#define U300_DMA_MSL_TX_5 5 +#define U300_DMA_MSL_TX_6 6 +#define U300_DMA_MSL_RX_0 7 +#define U300_DMA_MSL_RX_1 8 +#define U300_DMA_MSL_RX_2 9 +#define U300_DMA_MSL_RX_3 10 +#define U300_DMA_MSL_RX_4 11 +#define U300_DMA_MSL_RX_5 12 +#define U300_DMA_MSL_RX_6 13 +#define U300_DMA_MMCSD_RX_TX 14 +#define U300_DMA_MSPRO_TX 15 +#define U300_DMA_MSPRO_RX 16 +#define U300_DMA_UART0_TX 17 +#define U300_DMA_UART0_RX 18 +#define U300_DMA_APEX_TX 19 +#define U300_DMA_APEX_RX 20 +#define U300_DMA_PCM_I2S0_TX 21 +#define U300_DMA_PCM_I2S0_RX 22 +#define U300_DMA_PCM_I2S1_TX 23 +#define U300_DMA_PCM_I2S1_RX 24 +#define U300_DMA_XGAM_CDI 25 +#define U300_DMA_XGAM_PDI 26 +#define U300_DMA_SPI_TX 27 +#define U300_DMA_SPI_RX 28 +#define U300_DMA_GENERAL_PURPOSE_0 29 +#define U300_DMA_GENERAL_PURPOSE_1 30 +#define U300_DMA_GENERAL_PURPOSE_2 31 +#define U300_DMA_GENERAL_PURPOSE_3 32 +#define U300_DMA_GENERAL_PURPOSE_4 33 +#define U300_DMA_GENERAL_PURPOSE_5 34 +#define U300_DMA_GENERAL_PURPOSE_6 35 +#define U300_DMA_GENERAL_PURPOSE_7 36 +#define U300_DMA_GENERAL_PURPOSE_8 37 +#define U300_DMA_UART1_TX 38 +#define U300_DMA_UART1_RX 39 + +#define U300_DMA_DEVICE_CHANNELS 32 +#define U300_DMA_CHANNELS 40 + +/** + * coh901318_filter_id() - DMA channel filter function + * @chan: dma channel handle + * @chan_id: id of dma channel to be filter out + * + * In dma_request_channel() it specifies what channel id to be requested + */ +bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); +#else +static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id) +{ + return false; +} +#endif + +#endif /* PLAT_COH901318_H */ diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h index 51d52e767a1..2a50048c1c4 100644 --- a/include/linux/platform_data/i2c-s3c2410.h +++ b/include/linux/platform_data/i2c-s3c2410.h @@ -15,6 +15,8 @@ #define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ +struct platform_device; + /** * struct s3c2410_platform_i2c - Platform data for s3c I2C. * @bus_num: The bus number to use (if possible). diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h new file mode 100644 index 00000000000..ad3aa7b95f3 --- /dev/null +++ b/include/linux/platform_data/invensense_mpu6050.h @@ -0,0 +1,31 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef __INV_MPU6050_PLATFORM_H_ +#define __INV_MPU6050_PLATFORM_H_ + +/** + * struct inv_mpu6050_platform_data - Platform data for the mpu driver + * @orientation: Orientation matrix of the chip + * + * Contains platform specific information on how to configure the MPU6050 to + * work on this platform. The orientation matricies are 3x3 rotation matricies + * that are applied to the data to rotate from the mounting orientation to the + * platform orientation. The values must be one of 0, 1, or -1 and each row and + * column should have exactly 1 non-zero value. + */ +struct inv_mpu6050_platform_data { + __s8 orientation[9]; +}; + +#endif diff --git a/include/linux/platform_data/lp8755.h b/include/linux/platform_data/lp8755.h new file mode 100644 index 00000000000..a7fd0776c9b --- /dev/null +++ b/include/linux/platform_data/lp8755.h @@ -0,0 +1,71 @@ +/* + * LP8755 High Performance Power Management Unit Driver:System Interface Driver + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com> + * G.Shark Jeong <gshark.jeong@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP8755_H +#define _LP8755_H + +#include <linux/regulator/consumer.h> + +#define LP8755_NAME "lp8755-regulator" +/* + *PWR FAULT : power fault detected + *OCP : over current protect activated + *OVP : over voltage protect activated + *TEMP_WARN : thermal warning + *TEMP_SHDN : thermal shutdonw detected + *I_LOAD : current measured + */ +#define LP8755_EVENT_PWR_FAULT REGULATOR_EVENT_FAIL +#define LP8755_EVENT_OCP REGULATOR_EVENT_OVER_CURRENT +#define LP8755_EVENT_OVP 0x10000 +#define LP8755_EVENT_TEMP_WARN 0x2000 +#define LP8755_EVENT_TEMP_SHDN REGULATOR_EVENT_OVER_TEMP +#define LP8755_EVENT_I_LOAD 0x40000 + +enum lp8755_bucks { + LP8755_BUCK0 = 0, + LP8755_BUCK1, + LP8755_BUCK2, + LP8755_BUCK3, + LP8755_BUCK4, + LP8755_BUCK5, + LP8755_BUCK_MAX, +}; + +/** + * multiphase configuration options + */ +enum lp8755_mphase_config { + MPHASE_CONF0, + MPHASE_CONF1, + MPHASE_CONF2, + MPHASE_CONF3, + MPHASE_CONF4, + MPHASE_CONF5, + MPHASE_CONF6, + MPHASE_CONF7, + MPHASE_CONF8, + MPHASE_CONF_MAX +}; + +/** + * struct lp8755_platform_data + * @mphase_type : Multiphase Switcher Configurations. + * @buck_data : buck0~6 init voltage in uV + */ +struct lp8755_platform_data { + int mphase; + struct regulator_init_data *buck_data[LP8755_BUCK_MAX]; +}; +#endif diff --git a/include/linux/platform_data/max6697.h b/include/linux/platform_data/max6697.h new file mode 100644 index 00000000000..ed9d3b3daf0 --- /dev/null +++ b/include/linux/platform_data/max6697.h @@ -0,0 +1,36 @@ +/* + * max6697.h + * Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MAX6697_H +#define MAX6697_H + +#include <linux/types.h> + +/* + * For all bit masks: + * bit 0: local temperature + * bit 1..7: remote temperatures + */ +struct max6697_platform_data { + bool smbus_timeout_disable; /* set to disable SMBus timeouts */ + bool extended_range_enable; /* set to enable extended temp range */ + bool beta_compensation; /* set to enable beta compensation */ + u8 alert_mask; /* set bit to 1 to disable alert */ + u8 over_temperature_mask; /* set bit to 1 to disable */ + u8 resistance_cancellation; /* set bit to 0 to disable + * bit mask for MAX6581, + * boolean for other chips + */ + u8 ideality_mask; /* set bit to 0 to disable */ + u8 ideality_value; /* transistor ideality as per + * MAX6581 datasheet + */ +}; + +#endif /* MAX6697_H */ diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h new file mode 100644 index 00000000000..cfda59b226e --- /dev/null +++ b/include/linux/platform_data/microread.h @@ -0,0 +1,35 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) 2011 Tieto Poland + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _MICROREAD_H +#define _MICROREAD_H + +#include <linux/i2c.h> + +#define MICROREAD_DRIVER_NAME "microread" + +/* board config platform data for microread */ +struct microread_nfc_platform_data { + unsigned int rst_gpio; + unsigned int irq_gpio; + unsigned int ioh_gpio; +}; + +#endif /* _MICROREAD_H */ diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 24d32ca34be..6bf9ef43ddb 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -60,6 +60,8 @@ struct omap_nand_platform_data { int devsize; enum omap_ecc ecc_opt; struct gpmc_nand_regs reg; -}; + /* for passing the partitions */ + struct device_node *of_node; +}; #endif diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h index 685af7e8b12..e9a9fb188f9 100644 --- a/include/linux/platform_data/mtd-onenand-omap2.h +++ b/include/linux/platform_data/mtd-onenand-omap2.h @@ -29,5 +29,8 @@ struct omap_onenand_platform_data { u8 flags; u8 regulator_can_sleep; u8 skip_initial_unlocking; + + /* for passing the partitions */ + struct device_node *of_node; }; #endif diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h index 8b79e0967f9..3f1cbf95ec3 100644 --- a/include/linux/platform_data/s3c-hsotg.h +++ b/include/linux/platform_data/s3c-hsotg.h @@ -15,6 +15,8 @@ #ifndef __LINUX_USB_S3C_HSOTG_H #define __LINUX_USB_S3C_HSOTG_H +struct platform_device; + enum s3c_hsotg_dmamode { S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ S3C_HSOTG_DMA_ONLY, /* always use DMA */ diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h new file mode 100644 index 00000000000..1bd24cba982 --- /dev/null +++ b/include/linux/platform_data/samsung-usbphy.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * http://www.samsung.com/ + * Author: Praveen Paneri <p.paneri@samsung.com> + * + * Defines platform data for samsung usb phy driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __SAMSUNG_USBPHY_PLATFORM_H +#define __SAMSUNG_USBPHY_PLATFORM_H + +/** + * samsung_usbphy_data - Platform data for USB PHY driver. + * @pmu_isolation: Function to control usb phy isolation in PMU. + */ +struct samsung_usbphy_data { + void (*pmu_isolation)(int on); +}; + +extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd); + +#endif /* __SAMSUNG_USBPHY_PLATFORM_H */ diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index 7311ccd3217..215574d1e81 100644 --- a/include/linux/platform_data/sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -11,8 +11,8 @@ * (at your option) any later version. */ -#ifndef __SCCNXP_H -#define __SCCNXP_H +#ifndef _PLATFORM_DATA_SERIAL_SCCNXP_H_ +#define _PLATFORM_DATA_SERIAL_SCCNXP_H_ #define SCCNXP_MAX_UARTS 2 @@ -84,6 +84,8 @@ struct sccnxp_pdata { const u8 reg_shift; /* Modem control lines configuration */ const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + /* Timer value for polling mode (usecs) */ + const unsigned int poll_time_us; /* Called during startup */ void (*init)(void); /* Called before finish */ diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h index a65572d5321..c100456eab1 100644 --- a/include/linux/platform_data/spi-omap2-mcspi.h +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -22,6 +22,9 @@ struct omap2_mcspi_dev_attr { struct omap2_mcspi_device_config { unsigned turbo_mode:1; + + /* toggle chip select after every word */ + unsigned cs_per_word:1; }; #endif diff --git a/include/linux/platform_data/tsl2563.h b/include/linux/platform_data/tsl2563.h new file mode 100644 index 00000000000..c90d7a09dda --- /dev/null +++ b/include/linux/platform_data/tsl2563.h @@ -0,0 +1,8 @@ +#ifndef __LINUX_TSL2563_H +#define __LINUX_TSL2563_H + +struct tsl2563_platform_data { + int cover_comp_gain; +}; + +#endif /* __LINUX_TSL2563_H */ diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h new file mode 100644 index 00000000000..85dcc709f7e --- /dev/null +++ b/include/linux/platform_data/usb3503.h @@ -0,0 +1,19 @@ +#ifndef __USB3503_H__ +#define __USB3503_H__ + +#define USB3503_I2C_NAME "usb3503" + +enum usb3503_mode { + USB3503_MODE_UNKNOWN, + USB3503_MODE_HUB, + USB3503_MODE_STANDBY, +}; + +struct usb3503_platform_data { + enum usb3503_mode initial_mode; + int gpio_intn; + int gpio_connect; + int gpio_reset; +}; + +#endif |