diff options
Diffstat (limited to 'include/linux/regmap.h')
| -rw-r--r-- | include/linux/regmap.h | 15 |
1 files changed, 9 insertions, 6 deletions
diff --git a/include/linux/regmap.h b/include/linux/regmap.h index e55907804d3..4149f1a9b00 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -122,9 +122,9 @@ typedef void (*regmap_unlock)(void *); * volatile_table (see below) is not, the check is performed on * such table (a register is volatile if it belongs to one of * the ranges specified by volatile_table). - * @precious_reg: Optional callback returning true if the rgister + * @precious_reg: Optional callback returning true if the register * should not be read outside of a call from the driver - * (eg, a clear on read interrupt status register). If this + * (e.g., a clear on read interrupt status register). If this * field is NULL but precious_table (see below) is not, the * check is performed on such table (a register is precious if * it belongs to one of the ranges specified by precious_table). @@ -136,9 +136,9 @@ typedef void (*regmap_unlock)(void *); * are not overridden). * @reg_read: Optional callback that if filled will be used to perform * all the reads from the registers. Should only be provided for - * devices whos read operation cannot be represented as a simple read - * operation on a bus such as SPI, I2C, etc. Most of the devices do - * not need this. + * devices whose read operation cannot be represented as a simple + * read operation on a bus such as SPI, I2C, etc. Most of the + * devices do not need this. * @reg_write: Same as above for writing. * @fast_io: Register IO is fast. Use a spinlock instead of a mutex * to perform locking. This field is ignored if custom lock/unlock @@ -497,11 +497,13 @@ struct regmap_irq { * * @status_base: Base status register address. * @mask_base: Base mask register address. - * @ack_base: Base ack address. If zero then the chip is clear on read. + * @ack_base: Base ack address. If zero then the chip is clear on read. + * Using zero value is possible with @use_ack bit. * @wake_base: Base address for wake enables. If zero unsupported. * @irq_reg_stride: Stride to use for chips where registers are not contiguous. * @init_ack_masked: Ack all masked interrupts once during initalization. * @mask_invert: Inverted mask register: cleared bits are masked out. + * @use_ack: Use @ack register even if it is zero. * @wake_invert: Inverted wake register: cleared bits are wake enabled. * @runtime_pm: Hold a runtime PM lock on the device when accessing it. * @@ -520,6 +522,7 @@ struct regmap_irq_chip { unsigned int irq_reg_stride; bool init_ack_masked:1; bool mask_invert:1; + bool use_ack:1; bool wake_invert:1; bool runtime_pm:1; |