diff options
Diffstat (limited to 'include/linux/regulator/machine.h')
| -rw-r--r-- | include/linux/regulator/machine.h | 104 |
1 files changed, 104 insertions, 0 deletions
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h new file mode 100644 index 00000000000..11e737dbfcf --- /dev/null +++ b/include/linux/regulator/machine.h @@ -0,0 +1,104 @@ +/* + * machine.h -- SoC Regulator support, machine/board driver API. + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Regulator Machine/Board Interface. + */ + +#ifndef __LINUX_REGULATOR_MACHINE_H_ +#define __LINUX_REGULATOR_MACHINE_H_ + +#include <linux/regulator/consumer.h> +#include <linux/suspend.h> + +struct regulator; + +/* + * Regulator operation constraint flags. These flags are used to enable + * certain regulator operations and can be OR'ed together. + * + * VOLTAGE: Regulator output voltage can be changed by software on this + * board/machine. + * CURRENT: Regulator output current can be changed by software on this + * board/machine. + * MODE: Regulator operating mode can be changed by software on this + * board/machine. + * STATUS: Regulator can be enabled and disabled. + * DRMS: Dynamic Regulator Mode Switching is enabled for this regulator. + */ + +#define REGULATOR_CHANGE_VOLTAGE 0x1 +#define REGULATOR_CHANGE_CURRENT 0x2 +#define REGULATOR_CHANGE_MODE 0x4 +#define REGULATOR_CHANGE_STATUS 0x8 +#define REGULATOR_CHANGE_DRMS 0x10 + +/** + * struct regulator_state - regulator state during low power syatem states + * + * This describes a regulators state during a system wide low power state. + */ +struct regulator_state { + int uV; /* suspend voltage */ + unsigned int mode; /* suspend regulator operating mode */ + int enabled; /* is regulator enabled in this suspend state */ +}; + +/** + * struct regulation_constraints - regulator operating constraints. + * + * This struct describes regulator and board/machine specific constraints. + */ +struct regulation_constraints { + + char *name; + + /* voltage output range (inclusive) - for voltage control */ + int min_uV; + int max_uV; + + /* current output range (inclusive) - for current control */ + int min_uA; + int max_uA; + + /* valid regulator operating modes for this machine */ + unsigned int valid_modes_mask; + + /* valid operations for regulator on this machine */ + unsigned int valid_ops_mask; + + /* regulator input voltage - only if supply is another regulator */ + int input_uV; + + /* regulator suspend states for global PMIC STANDBY/HIBERNATE */ + struct regulator_state state_disk; + struct regulator_state state_mem; + struct regulator_state state_standby; + suspend_state_t initial_state; /* suspend state to set at init */ + + /* constriant flags */ + unsigned always_on:1; /* regulator never off when system is on */ + unsigned boot_on:1; /* bootloader/firmware enabled regulator */ + unsigned apply_uV:1; /* apply uV constraint iff min == max */ +}; + +int regulator_set_supply(const char *regulator, const char *regulator_supply); + +const char *regulator_get_supply(const char *regulator); + +int regulator_set_machine_constraints(const char *regulator, + struct regulation_constraints *constraints); + +int regulator_set_device_supply(const char *regulator, struct device *dev, + const char *supply); + +int regulator_suspend_prepare(suspend_state_t state); + +#endif |