diff options
Diffstat (limited to 'include/linux/regulator')
| -rw-r--r-- | include/linux/regulator/gpio-regulator.h | 87 | ||||
| -rw-r--r-- | include/linux/regulator/machine.h | 2 |
2 files changed, 88 insertions, 1 deletions
diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h new file mode 100644 index 00000000000..19fbd267406 --- /dev/null +++ b/include/linux/regulator/gpio-regulator.h @@ -0,0 +1,87 @@ +/* + * gpio-regulator.h + * + * Copyright 2011 Heiko Stuebner <heiko@sntech.de> + * + * based on fixed.h + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * Copyright (c) 2009 Nokia Corporation + * Roger Quadros <ext-roger.quadros@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + */ + +#ifndef __REGULATOR_GPIO_H +#define __REGULATOR_GPIO_H + +struct regulator_init_data; + +enum regulator_type; + +/** + * struct gpio_regulator_state - state description + * @value: microvolts or microamps + * @gpios: bitfield of gpio target-states for the value + * + * This structure describes a supported setting of the regulator + * and the necessary gpio-state to achieve it. + * + * The n-th bit in the bitfield describes the state of the n-th GPIO + * from the gpios-array defined in gpio_regulator_config below. + */ +struct gpio_regulator_state { + int value; + int gpios; +}; + +/** + * struct gpio_regulator_config - config structure + * @supply_name: Name of the regulator supply + * @enable_gpio: GPIO to use for enable control + * set to -EINVAL if not used + * @enable_high: Polarity of enable GPIO + * 1 = Active high, 0 = Active low + * @enabled_at_boot: Whether regulator has been enabled at + * boot or not. 1 = Yes, 0 = No + * This is used to keep the regulator at + * the default state + * @startup_delay: Start-up time in microseconds + * @gpios: Array containing the gpios needed to control + * the setting of the regulator + * @nr_gpios: Number of gpios + * @states: Array of gpio_regulator_state entries describing + * the gpio state for specific voltages + * @nr_states: Number of states available + * @regulator_type: either REGULATOR_CURRENT or REGULATOR_VOLTAGE + * @init_data: regulator_init_data + * + * This structure contains gpio-voltage regulator configuration + * information that must be passed by platform code to the + * gpio-voltage regulator driver. + */ +struct gpio_regulator_config { + const char *supply_name; + + int enable_gpio; + unsigned enable_high:1; + unsigned enabled_at_boot:1; + unsigned startup_delay; + + struct gpio *gpios; + int nr_gpios; + + struct gpio_regulator_state *states; + int nr_states; + + enum regulator_type type; + struct regulator_init_data *init_data; +}; + +#endif diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index ce3127a75c8..f3f13fd5868 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -95,7 +95,7 @@ struct regulator_state { */ struct regulation_constraints { - char *name; + const char *name; /* voltage output range (inclusive) - for voltage control */ int min_uV; |