3 files changed, 71 insertions, 26 deletions
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 76579f964a2..7bd73bbdfd1 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -26,7 +26,26 @@ enum ab8500_regulator_id {
 	AB8500_NUM_REGULATORS,
 };
 
-/* AB8500 register initialization */
+/* AB9450 regulators */
+enum ab9540_regulator_id {
+	AB9540_LDO_AUX1,
+	AB9540_LDO_AUX2,
+	AB9540_LDO_AUX3,
+	AB9540_LDO_AUX4,
+	AB9540_LDO_INTCORE,
+	AB9540_LDO_TVOUT,
+	AB9540_LDO_USB,
+	AB9540_LDO_AUDIO,
+	AB9540_LDO_ANAMIC1,
+	AB9540_LDO_ANAMIC2,
+	AB9540_LDO_DMIC,
+	AB9540_LDO_ANA,
+	AB9540_SYSCLKREQ_2,
+	AB9540_SYSCLKREQ_4,
+	AB9540_NUM_REGULATORS,
+};
+
+/* AB8500 and AB9540 register initialization */
 struct ab8500_regulator_reg_init {
 	int id;
 	u8 value;
@@ -71,4 +90,53 @@ enum ab8500_regulator_reg {
 	AB8500_NUM_REGULATOR_REGISTERS,
 };
 
+
+/* AB9540 registers */
+enum ab9540_regulator_reg {
+	AB9540_REGUREQUESTCTRL1,
+	AB9540_REGUREQUESTCTRL2,
+	AB9540_REGUREQUESTCTRL3,
+	AB9540_REGUREQUESTCTRL4,
+	AB9540_REGUSYSCLKREQ1HPVALID1,
+	AB9540_REGUSYSCLKREQ1HPVALID2,
+	AB9540_REGUHWHPREQ1VALID1,
+	AB9540_REGUHWHPREQ1VALID2,
+	AB9540_REGUHWHPREQ2VALID1,
+	AB9540_REGUHWHPREQ2VALID2,
+	AB9540_REGUSWHPREQVALID1,
+	AB9540_REGUSWHPREQVALID2,
+	AB9540_REGUSYSCLKREQVALID1,
+	AB9540_REGUSYSCLKREQVALID2,
+	AB9540_REGUVAUX4REQVALID,
+	AB9540_REGUMISC1,
+	AB9540_VAUDIOSUPPLY,
+	AB9540_REGUCTRL1VAMIC,
+	AB9540_VSMPS1REGU,
+	AB9540_VSMPS2REGU,
+	AB9540_VSMPS3REGU, /* NOTE! PRCMU register */
+	AB9540_VPLLVANAREGU,
+	AB9540_EXTSUPPLYREGU,
+	AB9540_VAUX12REGU,
+	AB9540_VRF1VAUX3REGU,
+	AB9540_VSMPS1SEL1,
+	AB9540_VSMPS1SEL2,
+	AB9540_VSMPS1SEL3,
+	AB9540_VSMPS2SEL1,
+	AB9540_VSMPS2SEL2,
+	AB9540_VSMPS2SEL3,
+	AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */
+	AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */
+	AB9540_VAUX1SEL,
+	AB9540_VAUX2SEL,
+	AB9540_VRF1VAUX3SEL,
+	AB9540_REGUCTRL2SPARE,
+	AB9540_VAUX4REQCTRL,
+	AB9540_VAUX4REGU,
+	AB9540_VAUX4SEL,
+	AB9540_REGUCTRLDISCH,
+	AB9540_REGUCTRLDISCH2,
+	AB9540_REGUCTRLDISCH3,
+	AB9540_NUM_REGULATOR_REGISTERS,
+};
+
 #endif
diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h
deleted file mode 100644
index a6d014005d4..00000000000
--- a/include/linux/regulator/bq24022.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
- * 1-Cell Li-Ion Charger connected via GPIOs.
- *
- * Copyright (c) 2008 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-struct regulator_init_data;
-
-/**
- * bq24022_mach_info - platform data for bq24022
- * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging
- * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA
- */
-struct bq24022_mach_info {
-	int gpio_nce;
-	int gpio_iset2;
-	struct regulator_init_data *init_data;
-};
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index b6c8d717c7e..4ed1b30ac5f 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -35,7 +35,8 @@
 #ifndef __LINUX_REGULATOR_CONSUMER_H_
 #define __LINUX_REGULATOR_CONSUMER_H_
 
-#include <linux/device.h>
+struct device;
+struct notifier_block;
 
 /*
  * Regulator operating modes.