summaryrefslogtreecommitdiffstats
path: root/include/linux/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/regulator')
-rw-r--r--include/linux/regulator/consumer.h4
-rw-r--r--include/linux/regulator/driver.h6
-rw-r--r--include/linux/regulator/fixed.h2
-rw-r--r--include/linux/regulator/max8649.h44
4 files changed, 55 insertions, 1 deletions
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 030d92255c7..28c9fd020d3 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -89,8 +89,9 @@
* REGULATION_OUT Regulator output is out of regulation.
* FAIL Regulator output has failed.
* OVER_TEMP Regulator over temp.
- * FORCE_DISABLE Regulator shut down by software.
+ * FORCE_DISABLE Regulator forcibly shut down by software.
* VOLTAGE_CHANGE Regulator voltage changed.
+ * DISABLE Regulator was disabled.
*
* NOTE: These events can be OR'ed together when passed into handler.
*/
@@ -102,6 +103,7 @@
#define REGULATOR_EVENT_OVER_TEMP 0x10
#define REGULATOR_EVENT_FORCE_DISABLE 0x20
#define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40
+#define REGULATOR_EVENT_DISABLE 0x80
struct regulator;
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 31f2055eae2..592cd7c642c 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -58,6 +58,9 @@ enum regulator_status {
* @get_optimum_mode: Get the most efficient operating mode for the regulator
* when running with the specified parameters.
*
+ * @enable_time: Time taken for the regulator voltage output voltage to
+ * stabalise after being enabled, in microseconds.
+ *
* @set_suspend_voltage: Set the voltage for the regulator when the system
* is suspended.
* @set_suspend_enable: Mark the regulator as enabled when the system is
@@ -93,6 +96,9 @@ struct regulator_ops {
int (*set_mode) (struct regulator_dev *, unsigned int mode);
unsigned int (*get_mode) (struct regulator_dev *);
+ /* Time taken to enable the regulator */
+ int (*enable_time) (struct regulator_dev *);
+
/* report regulator status ... most other accessors report
* control inputs, this reports results of combining inputs
* from Linux (and other sources) with the actual load.
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index e94a4a1c7c8..ffd7d508e72 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -25,6 +25,7 @@ struct regulator_init_data;
* @microvolts: Output voltage of regulator
* @gpio: GPIO to use for enable control
* set to -EINVAL if not used
+ * @startup_delay: Start-up time in microseconds
* @enable_high: Polarity of enable GPIO
* 1 = Active high, 0 = Active low
* @enabled_at_boot: Whether regulator has been enabled at
@@ -41,6 +42,7 @@ struct fixed_voltage_config {
const char *supply_name;
int microvolts;
int gpio;
+ unsigned startup_delay;
unsigned enable_high:1;
unsigned enabled_at_boot:1;
struct regulator_init_data *init_data;
diff --git a/include/linux/regulator/max8649.h b/include/linux/regulator/max8649.h
new file mode 100644
index 00000000000..417d14ecd5c
--- /dev/null
+++ b/include/linux/regulator/max8649.h
@@ -0,0 +1,44 @@
+/*
+ * Interface of Maxim max8649
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8649_H
+#define __LINUX_REGULATOR_MAX8649_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+ MAX8649_EXTCLK_26MHZ = 0,
+ MAX8649_EXTCLK_13MHZ,
+ MAX8649_EXTCLK_19MHZ, /* 19.2MHz */
+};
+
+enum {
+ MAX8649_RAMP_32MV = 0,
+ MAX8649_RAMP_16MV,
+ MAX8649_RAMP_8MV,
+ MAX8649_RAMP_4MV,
+ MAX8649_RAMP_2MV,
+ MAX8649_RAMP_1MV,
+ MAX8649_RAMP_0_5MV,
+ MAX8649_RAMP_0_25MV,
+};
+
+struct max8649_platform_data {
+ struct regulator_init_data *regulator;
+
+ unsigned mode:2; /* bit[1:0] = VID1,VID0 */
+ unsigned extclk_freq:2;
+ unsigned extclk:1;
+ unsigned ramp_timing:3;
+ unsigned ramp_down:1;
+};
+
+#endif /* __LINUX_REGULATOR_MAX8649_H */