summaryrefslogtreecommitdiffstats
path: root/include/linux/serial.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/serial.h')
-rw-r--r--include/linux/serial.h119
1 files changed, 1 insertions, 118 deletions
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 861e51de476..0916107c77f 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -6,16 +6,11 @@
* Redistribution of this file is permitted under the terms of the GNU
* Public License (GPL)
*/
-
#ifndef _LINUX_SERIAL_H
#define _LINUX_SERIAL_H
-#include <linux/types.h>
-
-#include <linux/tty_flags.h>
-
-#ifdef __KERNEL__
#include <asm/page.h>
+#include <uapi/linux/serial.h>
/*
@@ -33,118 +28,6 @@ struct async_icount {
*/
#define SERIAL_XMIT_SIZE PAGE_SIZE
-#endif
-
-struct serial_struct {
- int type;
- int line;
- unsigned int port;
- int irq;
- int flags;
- int xmit_fifo_size;
- int custom_divisor;
- int baud_base;
- unsigned short close_delay;
- char io_type;
- char reserved_char[1];
- int hub6;
- unsigned short closing_wait; /* time to wait before closing */
- unsigned short closing_wait2; /* no longer used... */
- unsigned char *iomem_base;
- unsigned short iomem_reg_shift;
- unsigned int port_high;
- unsigned long iomap_base; /* cookie passed into ioremap */
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output. 65535 means don't wait at all.
- */
-#define ASYNC_CLOSING_WAIT_INF 0
-#define ASYNC_CLOSING_WAIT_NONE 65535
-
-/*
- * These are the supported serial types.
- */
-#define PORT_UNKNOWN 0
-#define PORT_8250 1
-#define PORT_16450 2
-#define PORT_16550 3
-#define PORT_16550A 4
-#define PORT_CIRRUS 5 /* usurped by cyclades.c */
-#define PORT_16650 6
-#define PORT_16650V2 7
-#define PORT_16750 8
-#define PORT_STARTECH 9 /* usurped by cyclades.c */
-#define PORT_16C950 10 /* Oxford Semiconductor */
-#define PORT_16654 11
-#define PORT_16850 12
-#define PORT_RSA 13 /* RSA-DV II/S card */
-#define PORT_MAX 13
-
-#define SERIAL_IO_PORT 0
-#define SERIAL_IO_HUB6 1
-#define SERIAL_IO_MEM 2
-
-#define UART_CLEAR_FIFO 0x01
-#define UART_USE_FIFO 0x02
-#define UART_STARTECH 0x04
-#define UART_NATSEMI 0x08
-
-
-/*
- * Multiport serial configuration structure --- external structure
- */
-struct serial_multiport_struct {
- int irq;
- int port1;
- unsigned char mask1, match1;
- int port2;
- unsigned char mask2, match2;
- int port3;
- unsigned char mask3, match3;
- int port4;
- unsigned char mask4, match4;
- int port_monitor;
- int reserved[32];
-};
-
-/*
- * Serial input interrupt line counters -- external structure
- * Four lines can interrupt: CTS, DSR, RI, DCD
- */
-struct serial_icounter_struct {
- int cts, dsr, rng, dcd;
- int rx, tx;
- int frame, overrun, parity, brk;
- int buf_overrun;
- int reserved[9];
-};
-
-/*
- * Serial interface for controlling RS485 settings on chips with suitable
- * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
- * platform. The set function returns the new state, with any unsupported bits
- * reverted appropriately.
- */
-
-struct serial_rs485 {
- __u32 flags; /* RS485 feature flags */
-#define SER_RS485_ENABLED (1 << 0) /* If enabled */
-#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for
- RTS pin when
- sending */
-#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for
- RTS pin after sent*/
-#define SER_RS485_RX_DURING_TX (1 << 4)
- __u32 delay_rts_before_send; /* Delay before send (milliseconds) */
- __u32 delay_rts_after_send; /* Delay after send (milliseconds) */
- __u32 padding[5]; /* Memory is cheap, new structs
- are a royal PITA .. */
-};
-
-#ifdef __KERNEL__
#include <linux/compiler.h>
-#endif /* __KERNEL__ */
#endif /* _LINUX_SERIAL_H */