1 files changed, 0 insertions, 142 deletions
diff --git a/include/linux/serialP.h b/include/linux/serialP.h
deleted file mode 100644
index e811a615f69..00000000000
--- a/include/linux/serialP.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Private header file for the (dumb) serial driver
- *
- * Copyright (C) 1997 by Theodore Ts'o.
- * 
- * Redistribution of this file is permitted under the terms of the GNU 
- * Public License (GPL)
- */
-
-#ifndef _LINUX_SERIALP_H
-#define _LINUX_SERIALP_H
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-#include <linux/termios.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/circ_buf.h>
-#include <linux/wait.h>
-
-struct serial_state {
-	int	magic;
-	int	baud_base;
-	unsigned long	port;
-	int	irq;
-	int	flags;
-	int	hub6;
-	int	type;
-	int	line;
-	int	revision;	/* Chip revision (950) */
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	count;
-	u8	*iomem_base;
-	u16	iomem_reg_shift;
-	unsigned short	close_delay;
-	unsigned short	closing_wait; /* time to wait before closing */
-	struct async_icount	icount;	
-	int	io_type;
-	struct async_struct *info;
-	struct pci_dev	*dev;
-};
-
-struct async_struct {
-	int			magic;
-	unsigned long		port;
-	int			hub6;
-	int			flags;
-	int			xmit_fifo_size;
-	struct serial_state	*state;
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			quot;
-	int			x_char;	/* xon/xoff character */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2; /* obsolete */
-	int			IER; 	/* Interrupt Enable Register */
-	int			MCR; 	/* Modem control register */
-	int			LCR; 	/* Line control register */
-	int			ACR;	 /* 16950 Additional Control Reg. */
-	unsigned long		event;
-	unsigned long		last_active;
-	int			line;
-	int			blocked_open; /* # of blocked opens */
- 	struct circ_buf		xmit;
- 	spinlock_t		xmit_lock;
-	u8			*iomem_base;
-	u16			iomem_reg_shift;
-	int			io_type;
-	struct work_struct			work;
-	struct tasklet_struct	tlet;
-#ifdef DECLARE_WAITQUEUE
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-	wait_queue_head_t	delta_msr_wait;
-#else	
-	struct wait_queue	*open_wait;
-	struct wait_queue	*close_wait;
-	struct wait_queue	*delta_msr_wait;
-#endif	
-	struct async_struct	*next_port; /* For the linked list */
-	struct async_struct	*prev_port;
-};
-
-#define CONFIGURED_SERIAL_PORT(info) ((info)->port || ((info)->iomem_base))
-
-#define SERIAL_MAGIC 0x5301
-#define SSTATE_MAGIC 0x5302
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP	0
-
-/*
- * Multiport serial configuration structure --- internal structure
- */
-struct rs_multiport_struct {
-	int		port1;
-	unsigned char	mask1, match1;
-	int		port2;
-	unsigned char	mask2, match2;
-	int		port3;
-	unsigned char	mask3, match3;
-	int		port4;
-	unsigned char	mask4, match4;
-	int		port_monitor;
-};
-
-#if defined(__alpha__) && !defined(CONFIG_PCI)
-/*
- * Digital did something really horribly wrong with the OUT1 and OUT2
- * lines on at least some ALPHA's.  The failure mode is that if either
- * is cleared, the machine locks up with endless interrupts.
- *
- * This is still used by arch/mips/au1000/common/serial.c for some weird
- * reason (mips != alpha!)
- */
-#define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
-#elif defined(CONFIG_SBC8560)
-/*
- * WindRiver did something similarly broken on their SBC8560 board. The
- * UART tristates its IRQ output while OUT2 is clear, but they pulled
- * the interrupt line _up_ instead of down, so if we register the IRQ
- * while the UART is in that state, we die in an IRQ storm. */
-#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
-#else
-#define ALPHA_KLUDGE_MCR 0
-#endif
-
-#endif /* _LINUX_SERIAL_H */