diff options
Diffstat (limited to 'include/linux/serial_core.h')
| -rw-r--r-- | include/linux/serial_core.h | 110 |
1 files changed, 18 insertions, 92 deletions
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index a5c31146a33..b67305e3ad5 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -46,7 +46,8 @@ #define PORT_AR7 18 /* Texas Instruments AR7 internal UART */ #define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */ #define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */ -#define PORT_MAX_8250 20 /* max port ID */ +#define PORT_XR17D15X 21 /* Exar XR17D15x UART */ +#define PORT_MAX_8250 21 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -300,6 +301,7 @@ struct uart_port { void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); + int (*handle_irq)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int old); unsigned int irq; /* irq number */ @@ -317,9 +319,7 @@ struct uart_port { #define UPIO_MEM32 (3) #define UPIO_AU (4) /* Au1x00 type IO */ #define UPIO_TSI (5) /* Tsi108/109 type IO */ -#define UPIO_DWAPB (6) /* DesignWare APB UART */ -#define UPIO_RM9000 (7) /* RM9000 type IO */ -#define UPIO_DWAPB32 (8) /* DesignWare APB UART (32 bit accesses) */ +#define UPIO_RM9000 (6) /* RM9000 type IO */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ @@ -350,6 +350,8 @@ struct uart_port { #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) +#define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) +#define UPF_IIR_ONCE ((__force upf_t) (1 << 26)) /* The exact UART type is known and should not be probed. */ #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) @@ -384,7 +386,6 @@ struct uart_state { int pm_state; struct circ_buf xmit; - struct tasklet_struct tlet; struct uart_port *uart_port; }; @@ -483,10 +484,19 @@ static inline int uart_tx_stopped(struct uart_port *port) /* * The following are helper functions for the low level drivers. */ + +extern void uart_handle_dcd_change(struct uart_port *uport, + unsigned int status); +extern void uart_handle_cts_change(struct uart_port *uport, + unsigned int status); + +extern void uart_insert_char(struct uart_port *port, unsigned int status, + unsigned int overrun, unsigned int ch, unsigned int flag); + +#ifdef SUPPORT_SYSRQ static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) { -#ifdef SUPPORT_SYSRQ if (port->sysrq) { if (ch && time_before(jiffies, port->sysrq)) { handle_sysrq(ch); @@ -495,11 +505,10 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) } port->sysrq = 0; } -#endif return 0; } -#ifndef SUPPORT_SYSRQ -#define uart_handle_sysrq_char(port,ch) uart_handle_sysrq_char(port, 0) +#else +#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; }) #endif /* @@ -522,89 +531,6 @@ static inline int uart_handle_break(struct uart_port *port) return 0; } -/** - * uart_handle_dcd_change - handle a change of carrier detect state - * @uport: uart_port structure for the open port - * @status: new carrier detect status, nonzero if active - */ -static inline void -uart_handle_dcd_change(struct uart_port *uport, unsigned int status) -{ - struct uart_state *state = uport->state; - struct tty_port *port = &state->port; - struct tty_ldisc *ld = tty_ldisc_ref(port->tty); - struct pps_event_time ts; - - if (ld && ld->ops->dcd_change) - pps_get_ts(&ts); - - uport->icount.dcd++; -#ifdef CONFIG_HARD_PPS - if ((uport->flags & UPF_HARDPPS_CD) && status) - hardpps(); -#endif - - if (port->flags & ASYNC_CHECK_CD) { - if (status) - wake_up_interruptible(&port->open_wait); - else if (port->tty) - tty_hangup(port->tty); - } - - if (ld && ld->ops->dcd_change) - ld->ops->dcd_change(port->tty, status, &ts); - if (ld) - tty_ldisc_deref(ld); -} - -/** - * uart_handle_cts_change - handle a change of clear-to-send state - * @uport: uart_port structure for the open port - * @status: new clear to send status, nonzero if active - */ -static inline void -uart_handle_cts_change(struct uart_port *uport, unsigned int status) -{ - struct tty_port *port = &uport->state->port; - struct tty_struct *tty = port->tty; - - uport->icount.cts++; - - if (port->flags & ASYNC_CTS_FLOW) { - if (tty->hw_stopped) { - if (status) { - tty->hw_stopped = 0; - uport->ops->start_tx(uport); - uart_write_wakeup(uport); - } - } else { - if (!status) { - tty->hw_stopped = 1; - uport->ops->stop_tx(uport); - } - } - } -} - -#include <linux/tty_flip.h> - -static inline void -uart_insert_char(struct uart_port *port, unsigned int status, - unsigned int overrun, unsigned int ch, unsigned int flag) -{ - struct tty_struct *tty = port->state->port.tty; - - if ((status & port->ignore_status_mask & ~overrun) == 0) - tty_insert_flip_char(tty, ch, flag); - - /* - * Overrun is special. Since it's reported immediately, - * it doesn't affect the current character. - */ - if (status & ~port->ignore_status_mask & overrun) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); -} - /* * UART_ENABLE_MS - determine if port should enable modem status irqs */ |