diff options
Diffstat (limited to 'include/linux/serial_sci.h')
| -rw-r--r-- | include/linux/serial_sci.h | 93 |
1 files changed, 58 insertions, 35 deletions
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 22b3640c942..6c5e3bb282b 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -10,45 +10,59 @@ #define SCIx_NOT_SUPPORTED (-1) -#define SCSCR_TIE (1 << 7) -#define SCSCR_RIE (1 << 6) -#define SCSCR_TE (1 << 5) -#define SCSCR_RE (1 << 4) -#define SCSCR_REIE (1 << 3) /* not supported by all parts */ -#define SCSCR_TOIE (1 << 2) /* not supported by all parts */ -#define SCSCR_CKE1 (1 << 1) -#define SCSCR_CKE0 (1 << 0) - -/* SCxSR SCI */ -#define SCI_TDRE 0x80 -#define SCI_RDRF 0x40 -#define SCI_ORER 0x20 -#define SCI_FER 0x10 -#define SCI_PER 0x08 -#define SCI_TEND 0x04 +/* SCSMR (Serial Mode Register) */ +#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */ +#define SCSMR_PE (1 << 5) /* Parity Enable */ +#define SCSMR_ODD (1 << 4) /* Odd Parity */ +#define SCSMR_STOP (1 << 3) /* Stop Bit Length */ +#define SCSMR_CKS 0x0003 /* Clock Select */ + +/* Serial Control Register (@ = not supported by all parts) */ +#define SCSCR_TIE (1 << 7) /* Transmit Interrupt Enable */ +#define SCSCR_RIE (1 << 6) /* Receive Interrupt Enable */ +#define SCSCR_TE (1 << 5) /* Transmit Enable */ +#define SCSCR_RE (1 << 4) /* Receive Enable */ +#define SCSCR_REIE (1 << 3) /* Receive Error Interrupt Enable @ */ +#define SCSCR_TOIE (1 << 2) /* Timeout Interrupt Enable @ */ +#define SCSCR_CKE1 (1 << 1) /* Clock Enable 1 */ +#define SCSCR_CKE0 (1 << 0) /* Clock Enable 0 */ +/* SCIFA/SCIFB only */ +#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */ +#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */ + +/* SCxSR (Serial Status Register) on SCI */ +#define SCI_TDRE 0x80 /* Transmit Data Register Empty */ +#define SCI_RDRF 0x40 /* Receive Data Register Full */ +#define SCI_ORER 0x20 /* Overrun Error */ +#define SCI_FER 0x10 /* Framing Error */ +#define SCI_PER 0x08 /* Parity Error */ +#define SCI_TEND 0x04 /* Transmit End */ #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) -/* SCxSR SCIF, HSCIF */ -#define SCIF_ER 0x0080 -#define SCIF_TEND 0x0040 -#define SCIF_TDFE 0x0020 -#define SCIF_BRK 0x0010 -#define SCIF_FER 0x0008 -#define SCIF_PER 0x0004 -#define SCIF_RDF 0x0002 -#define SCIF_DR 0x0001 +/* SCxSR (Serial Status Register) on SCIF, HSCIF */ +#define SCIF_ER 0x0080 /* Receive Error */ +#define SCIF_TEND 0x0040 /* Transmission End */ +#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */ +#define SCIF_BRK 0x0010 /* Break Detect */ +#define SCIF_FER 0x0008 /* Framing Error */ +#define SCIF_PER 0x0004 /* Parity Error */ +#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */ +#define SCIF_DR 0x0001 /* Receive Data Ready */ #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) -/* SCSPTR, optional */ -#define SCSPTR_RTSIO (1 << 7) -#define SCSPTR_CTSIO (1 << 5) -#define SCSPTR_SPB2IO (1 << 1) -#define SCSPTR_SPB2DT (1 << 0) +/* SCFCR (FIFO Control Register) */ +#define SCFCR_LOOP (1 << 0) /* Loopback Test */ + +/* SCSPTR (Serial Port Register), optional */ +#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */ +#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */ +#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */ +#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */ /* HSSRR HSCIF */ -#define HSCIF_SRE 0x8000 +#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */ enum { SCIx_PROBE_REGTYPE, @@ -73,10 +87,19 @@ enum { * Not all registers will exist on all parts. */ enum { - SCSMR, SCBRR, SCSCR, SCxSR, - SCFCR, SCFDR, SCxTDR, SCxRDR, - SCLSR, SCTFDR, SCRFDR, SCSPTR, - HSSRR, + SCSMR, /* Serial Mode Register */ + SCBRR, /* Bit Rate Register */ + SCSCR, /* Serial Control Register */ + SCxSR, /* Serial Status Register */ + SCFCR, /* FIFO Control Register */ + SCFDR, /* FIFO Data Count Register */ + SCxTDR, /* Transmit (FIFO) Data Register */ + SCxRDR, /* Receive (FIFO) Data Register */ + SCLSR, /* Line Status Register */ + SCTFDR, /* Transmit FIFO Data Count Register */ + SCRFDR, /* Receive FIFO Data Count Register */ + SCSPTR, /* Serial Port Register */ + HSSRR, /* Sampling Rate Register */ SCIx_NR_REGS, }; |