diff options
Diffstat (limited to 'include/linux/skbuff.h')
| -rw-r--r-- | include/linux/skbuff.h | 206 |
1 files changed, 51 insertions, 155 deletions
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index bbd8d0027e2..11fd9f2c409 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -256,7 +256,10 @@ struct sk_buff { ktime_t tstamp; struct net_device *dev; - struct dst_entry *dst; + union { + struct dst_entry *dst; + struct rtable *rtable; + }; struct sec_path *sp; /* @@ -310,7 +313,10 @@ struct sk_buff { __u16 tc_verd; /* traffic control verdict */ #endif #endif - /* 2 byte hole */ +#ifdef CONFIG_IPV6_NDISC_NODETYPE + __u8 ndisc_nodetype:2; +#endif + /* 14 bit hole */ #ifdef CONFIG_NET_DMA dma_cookie_t dma_cookie; @@ -657,11 +663,21 @@ static inline void skb_queue_head_init_class(struct sk_buff_head *list, } /* - * Insert an sk_buff at the start of a list. + * Insert an sk_buff on a list. * * The "__skb_xxxx()" functions are the non-atomic ones that * can only be called with interrupts disabled. */ +extern void skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list); +static inline void __skb_insert(struct sk_buff *newsk, + struct sk_buff *prev, struct sk_buff *next, + struct sk_buff_head *list) +{ + newsk->next = next; + newsk->prev = prev; + next->prev = prev->next = newsk; + list->qlen++; +} /** * __skb_queue_after - queue a buffer at the list head @@ -678,13 +694,17 @@ static inline void __skb_queue_after(struct sk_buff_head *list, struct sk_buff *prev, struct sk_buff *newsk) { - struct sk_buff *next; - list->qlen++; + __skb_insert(newsk, prev, prev->next, list); +} - next = prev->next; - newsk->next = next; - newsk->prev = prev; - next->prev = prev->next = newsk; +extern void skb_append(struct sk_buff *old, struct sk_buff *newsk, + struct sk_buff_head *list); + +static inline void __skb_queue_before(struct sk_buff_head *list, + struct sk_buff *next, + struct sk_buff *newsk) +{ + __skb_insert(newsk, next->prev, next, list); } /** @@ -718,66 +738,7 @@ extern void skb_queue_tail(struct sk_buff_head *list, struct sk_buff *newsk); static inline void __skb_queue_tail(struct sk_buff_head *list, struct sk_buff *newsk) { - struct sk_buff *prev, *next; - - list->qlen++; - next = (struct sk_buff *)list; - prev = next->prev; - newsk->next = next; - newsk->prev = prev; - next->prev = prev->next = newsk; -} - - -/** - * __skb_dequeue - remove from the head of the queue - * @list: list to dequeue from - * - * Remove the head of the list. This function does not take any locks - * so must be used with appropriate locks held only. The head item is - * returned or %NULL if the list is empty. - */ -extern struct sk_buff *skb_dequeue(struct sk_buff_head *list); -static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list) -{ - struct sk_buff *next, *prev, *result; - - prev = (struct sk_buff *) list; - next = prev->next; - result = NULL; - if (next != prev) { - result = next; - next = next->next; - list->qlen--; - next->prev = prev; - prev->next = next; - result->next = result->prev = NULL; - } - return result; -} - - -/* - * Insert a packet on a list. - */ -extern void skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list); -static inline void __skb_insert(struct sk_buff *newsk, - struct sk_buff *prev, struct sk_buff *next, - struct sk_buff_head *list) -{ - newsk->next = next; - newsk->prev = prev; - next->prev = prev->next = newsk; - list->qlen++; -} - -/* - * Place a packet after a given packet in a list. - */ -extern void skb_append(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list); -static inline void __skb_append(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list) -{ - __skb_insert(newsk, old, old->next, list); + __skb_queue_before(list, (struct sk_buff *)list, newsk); } /* @@ -797,8 +758,22 @@ static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list) prev->next = next; } - -/* XXX: more streamlined implementation */ +/** + * __skb_dequeue - remove from the head of the queue + * @list: list to dequeue from + * + * Remove the head of the list. This function does not take any locks + * so must be used with appropriate locks held only. The head item is + * returned or %NULL if the list is empty. + */ +extern struct sk_buff *skb_dequeue(struct sk_buff_head *list); +static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list) +{ + struct sk_buff *skb = skb_peek(list); + if (skb) + __skb_unlink(skb, list); + return skb; +} /** * __skb_dequeue_tail - remove from the tail of the queue @@ -889,6 +864,7 @@ static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset) /* * Add data to an sk_buff */ +extern unsigned char *skb_put(struct sk_buff *skb, unsigned int len); static inline unsigned char *__skb_put(struct sk_buff *skb, unsigned int len) { unsigned char *tmp = skb_tail_pointer(skb); @@ -898,26 +874,7 @@ static inline unsigned char *__skb_put(struct sk_buff *skb, unsigned int len) return tmp; } -/** - * skb_put - add data to a buffer - * @skb: buffer to use - * @len: amount of data to add - * - * This function extends the used data area of the buffer. If this would - * exceed the total buffer size the kernel will panic. A pointer to the - * first byte of the extra data is returned. - */ -static inline unsigned char *skb_put(struct sk_buff *skb, unsigned int len) -{ - unsigned char *tmp = skb_tail_pointer(skb); - SKB_LINEAR_ASSERT(skb); - skb->tail += len; - skb->len += len; - if (unlikely(skb->tail > skb->end)) - skb_over_panic(skb, len, current_text_addr()); - return tmp; -} - +extern unsigned char *skb_push(struct sk_buff *skb, unsigned int len); static inline unsigned char *__skb_push(struct sk_buff *skb, unsigned int len) { skb->data -= len; @@ -925,24 +882,7 @@ static inline unsigned char *__skb_push(struct sk_buff *skb, unsigned int len) return skb->data; } -/** - * skb_push - add data to the start of a buffer - * @skb: buffer to use - * @len: amount of data to add - * - * This function extends the used data area of the buffer at the buffer - * start. If this would exceed the total buffer headroom the kernel will - * panic. A pointer to the first byte of the extra data is returned. - */ -static inline unsigned char *skb_push(struct sk_buff *skb, unsigned int len) -{ - skb->data -= len; - skb->len += len; - if (unlikely(skb->data<skb->head)) - skb_under_panic(skb, len, current_text_addr()); - return skb->data; -} - +extern unsigned char *skb_pull(struct sk_buff *skb, unsigned int len); static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len) { skb->len -= len; @@ -950,21 +890,6 @@ static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len) return skb->data += len; } -/** - * skb_pull - remove data from the start of a buffer - * @skb: buffer to use - * @len: amount of data to remove - * - * This function removes data from the start of a buffer, returning - * the memory to the headroom. A pointer to the next data in the buffer - * is returned. Once the data has been pulled future pushes will overwrite - * the old data. - */ -static inline unsigned char *skb_pull(struct sk_buff *skb, unsigned int len) -{ - return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len); -} - extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta); static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len) @@ -1205,21 +1130,7 @@ static inline void __skb_trim(struct sk_buff *skb, unsigned int len) skb_set_tail_pointer(skb, len); } -/** - * skb_trim - remove end from a buffer - * @skb: buffer to alter - * @len: new length - * - * Cut the length of a buffer down by removing data from the tail. If - * the buffer is already under the length specified it is not modified. - * The skb must be linear. - */ -static inline void skb_trim(struct sk_buff *skb, unsigned int len) -{ - if (skb->len > len) - __skb_trim(skb, len); -} - +extern void skb_trim(struct sk_buff *skb, unsigned int len); static inline int __pskb_trim(struct sk_buff *skb, unsigned int len) { @@ -1302,22 +1213,7 @@ static inline struct sk_buff *__dev_alloc_skb(unsigned int length, return skb; } -/** - * dev_alloc_skb - allocate an skbuff for receiving - * @length: length to allocate - * - * Allocate a new &sk_buff and assign it a usage count of one. The - * buffer has unspecified headroom built in. Users should allocate - * the headroom they think they need without accounting for the - * built in space. The built in space is used for optimisations. - * - * %NULL is returned if there is no free memory. Although this function - * allocates memory it can be called from an interrupt. - */ -static inline struct sk_buff *dev_alloc_skb(unsigned int length) -{ - return __dev_alloc_skb(length, GFP_ATOMIC); -} +extern struct sk_buff *dev_alloc_skb(unsigned int length); extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev, unsigned int length, gfp_t gfp_mask); |