diff options
Diffstat (limited to 'include/linux/spi')
| -rw-r--r-- | include/linux/spi/at86rf230.h | 14 | ||||
| -rw-r--r-- | include/linux/spi/spi-tegra.h | 40 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 8 |
3 files changed, 22 insertions, 40 deletions
diff --git a/include/linux/spi/at86rf230.h b/include/linux/spi/at86rf230.h index b2b1afbb320..aa327a8105a 100644 --- a/include/linux/spi/at86rf230.h +++ b/include/linux/spi/at86rf230.h @@ -26,6 +26,20 @@ struct at86rf230_platform_data { int rstn; int slp_tr; int dig2; + + /* Setting the irq_type will configure the driver to request + * the platform irq trigger type according to the given value + * and configure the interrupt polarity of the device to the + * corresponding polarity. + * + * Allowed values are: IRQF_TRIGGER_RISING, IRQF_TRIGGER_FALLING, + * IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW + * + * Setting it to 0, the driver does not touch the trigger type + * configuration of the interrupt and sets the interrupt polarity + * of the device to high active (the default value). + */ + int irq_type; }; #endif diff --git a/include/linux/spi/spi-tegra.h b/include/linux/spi/spi-tegra.h deleted file mode 100644 index 786932c62ed..00000000000 --- a/include/linux/spi/spi-tegra.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * spi-tegra.h: SPI interface for Nvidia Tegra20 SLINK controller. - * - * Copyright (C) 2011 NVIDIA Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef _LINUX_SPI_TEGRA_H -#define _LINUX_SPI_TEGRA_H - -struct tegra_spi_platform_data { - int dma_req_sel; - unsigned int spi_max_frequency; -}; - -/* - * Controller data from device to pass some info like - * hw based chip select can be used or not and if yes - * then CS hold and setup time. - */ -struct tegra_spi_device_controller_data { - bool is_hw_based_cs; - int cs_setup_clk_count; - int cs_hold_clk_count; -}; - -#endif /* _LINUX_SPI_TEGRA_H */ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 38c2b925923..733eb5ee31c 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -228,6 +228,11 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * every chipselect is connected to a slave. * @dma_alignment: SPI controller constraint on DMA buffers alignment. * @mode_bits: flags understood by this controller driver + * @bits_per_word_mask: A mask indicating which values of bits_per_word are + * supported by the driver. Bit n indicates that a bits_per_word n+1 is + * suported. If set, the SPI core will reject any transfer with an + * unsupported bits_per_word. If not set, this value is simply ignored, + * and it's up to the individual driver to perform any validation. * @flags: other constraints relevant to this driver * @bus_lock_spinlock: spinlock for SPI bus locking * @bus_lock_mutex: mutex for SPI bus locking @@ -301,6 +306,9 @@ struct spi_master { /* spi_device.mode flags understood by this controller driver */ u16 mode_bits; + /* bitmask of supported bits_per_word for transfers */ + u32 bits_per_word_mask; + /* other constraints relevant to this driver */ u16 flags; #define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ |