diff options
Diffstat (limited to 'include/linux/ssb/ssb_driver_chipcommon.h')
| -rw-r--r-- | include/linux/ssb/ssb_driver_chipcommon.h | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index 7d7e03dcf77..d3b1d18922f 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -181,6 +181,16 @@ #define SSB_CHIPCO_PROG_WAITCNT 0x0124 #define SSB_CHIPCO_FLASH_CFG 0x0128 #define SSB_CHIPCO_FLASH_WAITCNT 0x012C +#define SSB_CHIPCO_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */ +#define SSB_CHIPCO_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ +#define SSB_CHIPCO_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ +#define SSB_CHIPCO_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ +#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ +#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ +#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */ +#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */ +#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 #define SSB_CHIPCO_UART0_FCR 0x0308 @@ -197,6 +207,196 @@ #define SSB_CHIPCO_UART1_LSR 0x0414 #define SSB_CHIPCO_UART1_MSR 0x0418 #define SSB_CHIPCO_UART1_SCRATCH 0x041C +/* PMU registers (rev >= 20) */ +#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */ +#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16 +#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +#define SSB_CHIPCO_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ +#define SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT 2 +#define SSB_CHIPCO_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ +#define SSB_CHIPCO_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ +#define SSB_CHIPCO_PMU_CAP 0x0604 /* PMU capabilities */ +#define SSB_CHIPCO_PMU_CAP_REVISION 0x000000FF /* Revision mask */ +#define SSB_CHIPCO_PMU_STAT 0x0608 /* PMU status */ +#define SSB_CHIPCO_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ +#define SSB_CHIPCO_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ +#define SSB_CHIPCO_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ +#define SSB_CHIPCO_PMU_STAT_HAVEHT 0x00000004 /* HT available */ +#define SSB_CHIPCO_PMU_STAT_RESINIT 0x00000003 /* Res init */ +#define SSB_CHIPCO_PMU_RES_STAT 0x060C /* PMU res status */ +#define SSB_CHIPCO_PMU_RES_PEND 0x0610 /* PMU res pending */ +#define SSB_CHIPCO_PMU_TIMER 0x0614 /* PMU timer */ +#define SSB_CHIPCO_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ +#define SSB_CHIPCO_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ +#define SSB_CHIPCO_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ +#define SSB_CHIPCO_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ +#define SSB_CHIPCO_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ +#define SSB_CHIPCO_PMU_RES_TIMER 0x062C /* PMU res timer */ +#define SSB_CHIPCO_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ +#define SSB_CHIPCO_PMU_WATCHDOG 0x0634 /* PMU watchdog */ +#define SSB_CHIPCO_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ +#define SSB_CHIPCO_PMU_RES_REQT 0x0644 /* PMU res req timer */ +#define SSB_CHIPCO_PMU_RES_REQM 0x0648 /* PMU res req mask */ +#define SSB_CHIPCO_CHIPCTL_ADDR 0x0650 +#define SSB_CHIPCO_CHIPCTL_DATA 0x0654 +#define SSB_CHIPCO_REGCTL_ADDR 0x0658 +#define SSB_CHIPCO_REGCTL_DATA 0x065C +#define SSB_CHIPCO_PLLCTL_ADDR 0x0660 +#define SSB_CHIPCO_PLLCTL_DATA 0x0664 + + + +/** PMU PLL registers */ + +/* PMU rev 0 PLL registers */ +#define SSB_PMU0_PLLCTL0 0 +#define SSB_PMU0_PLLCTL0_PDIV_MSK 0x00000001 +#define SSB_PMU0_PLLCTL0_PDIV_FREQ 25000 /* kHz */ +#define SSB_PMU0_PLLCTL1 1 +#define SSB_PMU0_PLLCTL1_WILD_IMSK 0xF0000000 /* Wild int mask (low nibble) */ +#define SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT 28 +#define SSB_PMU0_PLLCTL1_WILD_FMSK 0x0FFFFF00 /* Wild frac mask */ +#define SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT 8 +#define SSB_PMU0_PLLCTL1_STOPMOD 0x00000040 /* Stop mod */ +#define SSB_PMU0_PLLCTL2 2 +#define SSB_PMU0_PLLCTL2_WILD_IMSKHI 0x0000000F /* Wild int mask (high nibble) */ +#define SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT 0 + +/* PMU rev 1 PLL registers */ +#define SSB_PMU1_PLLCTL0 0 +#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */ +#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20 +#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */ +#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24 +#define SSB_PMU1_PLLCTL1 1 +#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */ +#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0 +#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */ +#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8 +#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */ +#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16 +#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */ +#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24 +#define SSB_PMU1_PLLCTL2 2 +#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */ +#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0 +#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */ +#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8 +#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */ +#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17 +#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */ +#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20 +#define SSB_PMU1_PLLCTL3 3 +#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */ +#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0 +#define SSB_PMU1_PLLCTL4 4 +#define SSB_PMU1_PLLCTL5 5 +#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */ +#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8 + +/* BCM4312 PLL resource numbers. */ +#define SSB_PMURES_4312_SWITCHER_BURST 0 +#define SSB_PMURES_4312_SWITCHER_PWM 1 +#define SSB_PMURES_4312_PA_REF_LDO 2 +#define SSB_PMURES_4312_CORE_LDO_BURST 3 +#define SSB_PMURES_4312_CORE_LDO_PWM 4 +#define SSB_PMURES_4312_RADIO_LDO 5 +#define SSB_PMURES_4312_ILP_REQUEST 6 +#define SSB_PMURES_4312_BG_FILTBYP 7 +#define SSB_PMURES_4312_TX_FILTBYP 8 +#define SSB_PMURES_4312_RX_FILTBYP 9 +#define SSB_PMURES_4312_XTAL_PU 10 +#define SSB_PMURES_4312_ALP_AVAIL 11 +#define SSB_PMURES_4312_BB_PLL_FILTBYP 12 +#define SSB_PMURES_4312_RF_PLL_FILTBYP 13 +#define SSB_PMURES_4312_HT_AVAIL 14 + +/* BCM4325 PLL resource numbers. */ +#define SSB_PMURES_4325_BUCK_BOOST_BURST 0 +#define SSB_PMURES_4325_CBUCK_BURST 1 +#define SSB_PMURES_4325_CBUCK_PWM 2 +#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3 +#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4 +#define SSB_PMURES_4325_BUCK_BOOST_PWM 5 +#define SSB_PMURES_4325_ILP_REQUEST 6 +#define SSB_PMURES_4325_ABUCK_BURST 7 +#define SSB_PMURES_4325_ABUCK_PWM 8 +#define SSB_PMURES_4325_LNLDO1_PU 9 +#define SSB_PMURES_4325_LNLDO2_PU 10 +#define SSB_PMURES_4325_LNLDO3_PU 11 +#define SSB_PMURES_4325_LNLDO4_PU 12 +#define SSB_PMURES_4325_XTAL_PU 13 +#define SSB_PMURES_4325_ALP_AVAIL 14 +#define SSB_PMURES_4325_RX_PWRSW_PU 15 +#define SSB_PMURES_4325_TX_PWRSW_PU 16 +#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17 +#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18 +#define SSB_PMURES_4325_AFE_PWRSW_PU 19 +#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20 +#define SSB_PMURES_4325_HT_AVAIL 21 + +/* BCM4328 PLL resource numbers. */ +#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0 +#define SSB_PMURES_4328_BB_SWITCHER_PWM 1 +#define SSB_PMURES_4328_BB_SWITCHER_BURST 2 +#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3 +#define SSB_PMURES_4328_ILP_REQUEST 4 +#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5 +#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6 +#define SSB_PMURES_4328_ROM_SWITCH 7 +#define SSB_PMURES_4328_PA_REF_LDO 8 +#define SSB_PMURES_4328_RADIO_LDO 9 +#define SSB_PMURES_4328_AFE_LDO 10 +#define SSB_PMURES_4328_PLL_LDO 11 +#define SSB_PMURES_4328_BG_FILTBYP 12 +#define SSB_PMURES_4328_TX_FILTBYP 13 +#define SSB_PMURES_4328_RX_FILTBYP 14 +#define SSB_PMURES_4328_XTAL_PU 15 +#define SSB_PMURES_4328_XTAL_EN 16 +#define SSB_PMURES_4328_BB_PLL_FILTBYP 17 +#define SSB_PMURES_4328_RF_PLL_FILTBYP 18 +#define SSB_PMURES_4328_BB_PLL_PU 19 + +/* BCM5354 PLL resource numbers. */ +#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0 +#define SSB_PMURES_5354_BB_SWITCHER_PWM 1 +#define SSB_PMURES_5354_BB_SWITCHER_BURST 2 +#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3 +#define SSB_PMURES_5354_ILP_REQUEST 4 +#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5 +#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6 +#define SSB_PMURES_5354_ROM_SWITCH 7 +#define SSB_PMURES_5354_PA_REF_LDO 8 +#define SSB_PMURES_5354_RADIO_LDO 9 +#define SSB_PMURES_5354_AFE_LDO 10 +#define SSB_PMURES_5354_PLL_LDO 11 +#define SSB_PMURES_5354_BG_FILTBYP 12 +#define SSB_PMURES_5354_TX_FILTBYP 13 +#define SSB_PMURES_5354_RX_FILTBYP 14 +#define SSB_PMURES_5354_XTAL_PU 15 +#define SSB_PMURES_5354_XTAL_EN 16 +#define SSB_PMURES_5354_BB_PLL_FILTBYP 17 +#define SSB_PMURES_5354_RF_PLL_FILTBYP 18 +#define SSB_PMURES_5354_BB_PLL_PU 19 + + + +/** Chip specific Chip-Status register contents. */ +#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 +#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ +#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ +#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */ +#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */ +#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004 +#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2 +#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008 +#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3 +#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0 +#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 +#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ @@ -353,11 +553,20 @@ struct ssb_device; struct ssb_serial_port; +/* Data for the PMU, if available. + * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU) + */ +struct ssb_chipcommon_pmu { + u8 rev; /* PMU revision */ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + struct ssb_chipcommon { struct ssb_device *dev; u32 capabilities; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; + struct ssb_chipcommon_pmu pmu; }; static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) @@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) return (cc->dev != NULL); } +/* Register access */ +#define chipco_read32(cc, offset) ssb_read32((cc)->dev, offset) +#define chipco_write32(cc, offset, val) ssb_write32((cc)->dev, offset, val) + +#define chipco_mask32(cc, offset, mask) \ + chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask)) +#define chipco_set32(cc, offset, set) \ + chipco_write32(cc, offset, chipco_read32(cc, offset) | (set)) +#define chipco_maskset32(cc, offset, mask, set) \ + chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set)) + extern void ssb_chipcommon_init(struct ssb_chipcommon *cc); extern void ssb_chipco_suspend(struct ssb_chipcommon *cc); @@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, struct ssb_serial_port *ports); #endif /* CONFIG_SSB_SERIAL */ +/* PMU support */ +extern void ssb_pmu_init(struct ssb_chipcommon *cc); + + #endif /* LINUX_SSB_CHIPCO_H_ */ |