diff options
Diffstat (limited to 'include/linux/ssb/ssb_regs.h')
| -rw-r--r-- | include/linux/ssb/ssb_regs.h | 38 |
1 files changed, 27 insertions, 11 deletions
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index bcebcffd448..96bba69b127 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -147,6 +147,10 @@ #define SSB_IDLOW_SSBREV 0xF0000000 /* Sonics Backplane Revision code */ #define SSB_IDLOW_SSBREV_22 0x00000000 /* <= 2.2 */ #define SSB_IDLOW_SSBREV_23 0x10000000 /* 2.3 */ +#define SSB_IDLOW_SSBREV_24 0x40000000 /* ?? Found in BCM4328 */ +#define SSB_IDLOW_SSBREV_25 0x50000000 /* ?? Not Found yet */ +#define SSB_IDLOW_SSBREV_26 0x60000000 /* ?? Found in some BCM4311/2 */ +#define SSB_IDLOW_SSBREV_27 0x70000000 /* ?? Found in some BCM4311/2 */ #define SSB_IDHIGH 0x0FFC /* SB Identification High */ #define SSB_IDHIGH_RCLO 0x0000000F /* Revision Code (low part) */ #define SSB_IDHIGH_CC 0x00008FF0 /* Core Code */ @@ -162,6 +166,10 @@ */ #define SSB_SPROMSIZE_WORDS 64 #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) +#define SSB_SPROMSIZE_WORDS_R123 64 +#define SSB_SPROMSIZE_WORDS_R4 220 +#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) +#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) #define SSB_SPROM_BASE 0x1000 #define SSB_SPROM_REVISION 0x107E #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ @@ -232,7 +240,10 @@ #define SSB_SPROM2_OPO_VALUE 0x00FF #define SSB_SPROM2_OPO_UNUSED 0xFF00 #define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ -/* SPROM Revision 3 (inherits from rev 2) */ +/* SPROM Revision 3 (inherits most data from rev 2) */ +#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ +#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */ +#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */ #define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ @@ -250,8 +261,10 @@ #define SSB_SPROM3_CCKPO_11M 0xF000 /* 11M Rate PO */ #define SSB_SPROM3_CCKPO_11M_SHIFT 12 #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ -/* SPROM Revision 4 */ +/* SPROM Revision 4 entries with ?? in comment are unknown */ #define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for b/g */ +#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */ +#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */ #define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings */ #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ @@ -263,19 +276,22 @@ #define SSB_SPROM4_ANT_BG 0x105C /* B/G Antennas */ #define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ #define SSB_SPROM4_AGAIN 0x105E /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM4_AGAIN_0 0x00FF /* Antenna 0 */ +#define SSB_SPROM4_AGAIN_1 0xFF00 /* Antenna 1 */ +#define SSB_SPROM4_AGAIN_1_SHIFT 8 #define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ -#define SSB_SPROM4_MAXP_A 0x1000 /* Max Power A */ +#define SSB_SPROM4_MAXP_A 0x1000 /* Max Power A ?? */ #define SSB_SPROM4_MAXP_A_HI 0x00FF /* Mask for Hi */ #define SSB_SPROM4_MAXP_A_LO 0xFF00 /* Mask for Lo */ #define SSB_SPROM4_MAXP_A_LO_SHIFT 16 /* Shift for Lo */ -#define SSB_SPROM4_PA1LOB0 0x1000 -#define SSB_SPROM4_PA1LOB1 0x1000 -#define SSB_SPROM4_PA1LOB2 0x1000 -#define SSB_SPROM4_PA1HIB0 0x1000 -#define SSB_SPROM4_PA1HIB1 0x1000 -#define SSB_SPROM4_PA1HIB2 0x1000 -#define SSB_SPROM4_OPO 0x1000 -#define SSB_SPROM4_OPO_VALUE 0x0000 +#define SSB_SPROM4_PA1LOB0 0x1000 /* ?? */ +#define SSB_SPROM4_PA1LOB1 0x1000 /* ?? */ +#define SSB_SPROM4_PA1LOB2 0x1000 /* ?? */ +#define SSB_SPROM4_PA1HIB0 0x1000 /* ?? */ +#define SSB_SPROM4_PA1HIB1 0x1000 /* ?? */ +#define SSB_SPROM4_PA1HIB2 0x1000 /* ?? */ +#define SSB_SPROM4_OPO 0x1000 /* ?? */ +#define SSB_SPROM4_OPO_VALUE 0x0000 /* ?? */ #define SSB_SPROM4_GPIOLDC 0x105A /* LED Powersave Duty Cycle */ #define SSB_SPROM4_GPIOLDC_OFF 0x0000FF00 /* Off Count */ #define SSB_SPROM4_GPIOLDC_OFF_SHIFT 8 |