diff options
Diffstat (limited to 'include/linux/ssb/ssb_regs.h')
| -rw-r--r-- | include/linux/ssb/ssb_regs.h | 83 |
1 files changed, 74 insertions, 9 deletions
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 47c7c71a5ac..ebad0bac980 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -147,6 +147,10 @@ #define SSB_IDLOW_SSBREV 0xF0000000 /* Sonics Backplane Revision code */ #define SSB_IDLOW_SSBREV_22 0x00000000 /* <= 2.2 */ #define SSB_IDLOW_SSBREV_23 0x10000000 /* 2.3 */ +#define SSB_IDLOW_SSBREV_24 0x40000000 /* ?? Found in BCM4328 */ +#define SSB_IDLOW_SSBREV_25 0x50000000 /* ?? Not Found yet */ +#define SSB_IDLOW_SSBREV_26 0x60000000 /* ?? Found in some BCM4311/2 */ +#define SSB_IDLOW_SSBREV_27 0x70000000 /* ?? Found in some BCM4311/2 */ #define SSB_IDHIGH 0x0FFC /* SB Identification High */ #define SSB_IDHIGH_RCLO 0x0000000F /* Revision Code (low part) */ #define SSB_IDHIGH_CC 0x00008FF0 /* Core Code */ @@ -162,11 +166,16 @@ */ #define SSB_SPROMSIZE_WORDS 64 #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) +#define SSB_SPROMSIZE_WORDS_R123 64 +#define SSB_SPROMSIZE_WORDS_R4 220 +#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) +#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) #define SSB_SPROM_BASE 0x1000 #define SSB_SPROM_REVISION 0x107E #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ #define SSB_SPROM_REVISION_CRC_SHIFT 8 + /* SPROM Revision 1 */ #define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ #define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ @@ -184,10 +193,10 @@ #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ #define SSB_SPROM1_BINF_CCODE_SHIFT 8 -#define SSB_SPROM1_BINF_ANTA 0x3000 /* Available A-PHY antennas */ -#define SSB_SPROM1_BINF_ANTA_SHIFT 12 -#define SSB_SPROM1_BINF_ANTBG 0xC000 /* Available B-PHY antennas */ -#define SSB_SPROM1_BINF_ANTBG_SHIFT 14 +#define SSB_SPROM1_BINF_ANTBG 0x3000 /* Available B-PHY and G-PHY antennas */ +#define SSB_SPROM1_BINF_ANTBG_SHIFT 12 +#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ +#define SSB_SPROM1_BINF_ANTA_SHIFT 14 #define SSB_SPROM1_PA0B0 0x105E #define SSB_SPROM1_PA0B1 0x1060 #define SSB_SPROM1_PA0B2 0x1062 @@ -212,10 +221,11 @@ #define SSB_SPROM1_ITSSI_A_SHIFT 8 #define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ #define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ -#define SSB_SPROM1_AGAIN_A 0x00FF /* A-PHY */ -#define SSB_SPROM1_AGAIN_BG 0xFF00 /* B-PHY and G-PHY */ -#define SSB_SPROM1_AGAIN_BG_SHIFT 8 -#define SSB_SPROM1_OEM 0x1076 /* 8 bytes OEM string (rev 1 only) */ +#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ +#define SSB_SPROM1_AGAIN_BG_SHIFT 0 +#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ +#define SSB_SPROM1_AGAIN_A_SHIFT 8 + /* SPROM Revision 2 (inherits from rev 1) */ #define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ #define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ @@ -232,7 +242,11 @@ #define SSB_SPROM2_OPO_VALUE 0x00FF #define SSB_SPROM2_OPO_UNUSED 0xFF00 #define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ -/* SPROM Revision 3 (inherits from rev 2) */ + +/* SPROM Revision 3 (inherits most data from rev 2) */ +#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ +#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */ +#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */ #define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ @@ -251,6 +265,57 @@ #define SSB_SPROM3_CCKPO_11M_SHIFT 12 #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ +/* SPROM Revision 4 */ +#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */ +#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */ +#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ +#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ +#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ +#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 +#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ +#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ +#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ +#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 +#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ +#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ +#define SSB_SPROM4_AGAIN0_SHIFT 0 +#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ +#define SSB_SPROM4_AGAIN1_SHIFT 8 +#define SSB_SPROM4_AGAIN23 0x1060 +#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ +#define SSB_SPROM4_AGAIN2_SHIFT 0 +#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ +#define SSB_SPROM4_AGAIN3_SHIFT 8 +#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ +#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ +#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ +#define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +#define SSB_SPROM4_ITSSI_BG_SHIFT 8 +#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ +#define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ +#define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ +#define SSB_SPROM4_ITSSI_A_SHIFT 8 +#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM4_GPIOA_P1_SHIFT 8 +#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM4_GPIOB_P3_SHIFT 8 +#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ +#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ +#define SSB_SPROM4_PA0B2 0x1086 +#define SSB_SPROM4_PA1B0 0x108E +#define SSB_SPROM4_PA1B1 0x1090 +#define SSB_SPROM4_PA1B2 0x1092 + /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, |