diff options
Diffstat (limited to 'include/linux/ssb')
| -rw-r--r-- | include/linux/ssb/ssb.h | 108 | ||||
| -rw-r--r-- | include/linux/ssb/ssb_regs.h | 34 |
2 files changed, 127 insertions, 15 deletions
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index dcf35b0f303..d2768318002 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -16,6 +16,12 @@ struct pcmcia_device; struct ssb_bus; struct ssb_driver; +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; + u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ @@ -26,9 +32,12 @@ struct ssb_sprom { u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ u16 board_rev; /* Board revision number from SPROM. */ + u16 board_num; /* Board number from SPROM. */ + u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ - u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ - u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + char alpha2[2]; /* Country Code as two chars like EU or US */ + u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; @@ -47,10 +56,10 @@ struct ssb_sprom { u8 gpio1; /* GPIO pin 1 */ u8 gpio2; /* GPIO pin 2 */ u8 gpio3; /* GPIO pin 3 */ - u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ u8 itssi_a; /* Idle TSSI Target for A-PHY */ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ u8 tri2g; /* 2.4GHz TX isolation */ @@ -61,8 +70,8 @@ struct ssb_sprom { u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ - u8 rxpo2g; /* 2GHz RX power offset */ - u8 rxpo5g; /* 5GHz RX power offset */ + s8 rxpo2g; /* 2GHz RX power offset */ + s8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ u8 rssismc2g; u8 rssismf2g; @@ -82,16 +91,13 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ + struct ssb_sprom_core_pwr_info core_pwr_info[4]; + /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ struct { - struct { - s8 a0, a1, a2, a3; - } ghz24; /* 2.4GHz band */ - struct { - s8 a0, a1, a2, a3; - } ghz5; /* 5GHz band */ + s8 a0, a1, a2, a3; } antenna_gain; struct { @@ -103,7 +109,79 @@ struct ssb_sprom { } ghz5; } fem; - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + u16 mcs2gpo[8]; + u16 mcs5gpo[8]; + u16 mcs5glpo[8]; + u16 mcs5ghpo[8]; + u8 opo; + + u8 rxgainerr2ga[3]; + u8 rxgainerr5gla[3]; + u8 rxgainerr5gma[3]; + u8 rxgainerr5gha[3]; + u8 rxgainerr5gua[3]; + + u8 noiselvl2ga[3]; + u8 noiselvl5gla[3]; + u8 noiselvl5gma[3]; + u8 noiselvl5gha[3]; + u8 noiselvl5gua[3]; + + u8 regrev; + u8 txchain; + u8 rxchain; + u8 antswitch; + u16 cddpo; + u16 stbcpo; + u16 bw40po; + u16 bwduppo; + + u8 tempthresh; + u8 tempoffset; + u16 rawtempsense; + u8 measpower; + u8 tempsense_slope; + u8 tempcorrx; + u8 tempsense_option; + u8 freqoffset_corr; + u8 iqcal_swp_dis; + u8 hw_iqcal_en; + u8 elna2g; + u8 elna5g; + u8 phycal_tempdelta; + u8 temps_period; + u8 temps_hysteresis; + u8 measpower1; + u8 measpower2; + u8 pcieingress_war; + + /* power per rate from sromrev 9 */ + u16 cckbw202gpo; + u16 cckbw20ul2gpo; + u32 legofdmbw202gpo; + u32 legofdmbw20ul2gpo; + u32 legofdmbw205glpo; + u32 legofdmbw20ul5glpo; + u32 legofdmbw205gmpo; + u32 legofdmbw20ul5gmpo; + u32 legofdmbw205ghpo; + u32 legofdmbw20ul5ghpo; + u32 mcsbw202gpo; + u32 mcsbw20ul2gpo; + u32 mcsbw402gpo; + u32 mcsbw205glpo; + u32 mcsbw20ul5glpo; + u32 mcsbw405glpo; + u32 mcsbw205gmpo; + u32 mcsbw20ul5gmpo; + u32 mcsbw405gmpo; + u32 mcsbw205ghpo; + u32 mcsbw20ul5ghpo; + u32 mcsbw405ghpo; + u16 mcs32po; + u16 legofdm40duppo; + u8 sar2g; + u8 sar5g; }; /* Information about the PCB the circuitry is soldered on. */ diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index c814ae6eeb2..40b1ef8595e 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -449,6 +449,39 @@ #define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 #define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 #define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA + +/* There are 4 blocks with power info sharing the same layout */ +#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 +#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 +#define SSB_SROM8_PWR_INFO_CORE2 0x0100 +#define SSB_SROM8_PWR_INFO_CORE3 0x0120 + +#define SSB_SROM8_2G_MAXP_ITSSI 0x00 +#define SSB_SPROM8_2G_MAXP 0x00FF +#define SSB_SPROM8_2G_ITSSI 0xFF00 +#define SSB_SPROM8_2G_ITSSI_SHIFT 8 +#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ +#define SSB_SROM8_2G_PA_1 0x04 +#define SSB_SROM8_2G_PA_2 0x06 +#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ +#define SSB_SPROM8_5G_MAXP 0x00FF +#define SSB_SPROM8_5G_ITSSI 0xFF00 +#define SSB_SPROM8_5G_ITSSI_SHIFT 8 +#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ +#define SSB_SPROM8_5GH_MAXP 0x00FF +#define SSB_SPROM8_5GL_MAXP 0xFF00 +#define SSB_SPROM8_5GL_MAXP_SHIFT 8 +#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ +#define SSB_SROM8_5G_PA_1 0x0E +#define SSB_SROM8_5G_PA_2 0x10 +#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ +#define SSB_SROM8_5GL_PA_1 0x14 +#define SSB_SROM8_5GL_PA_2 0x16 +#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ +#define SSB_SROM8_5GH_PA_1 0x1A +#define SSB_SROM8_5GH_PA_2 0x1C + +/* TODO: Make it deprecated */ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -473,6 +506,7 @@ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ #define SSB_SPROM8_PA1HIB1 0x00DA #define SSB_SPROM8_PA1HIB2 0x00DC + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ |