diff options
Diffstat (limited to 'include/linux/usb.h')
| -rw-r--r-- | include/linux/usb.h | 156 |
1 files changed, 124 insertions, 32 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h index d2bd0c8e015..0da15b0b02b 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -19,6 +19,7 @@ #include <linux/fs.h> /* for struct file_operations */ #include <linux/completion.h> /* for struct completion */ #include <linux/sched.h> /* for current && schedule_timeout */ +#include <linux/mutex.h> /* for struct mutex */ struct usb_device; struct usb_driver; @@ -102,8 +103,13 @@ enum usb_interface_condition { * number from the USB core by calling usb_register_dev(). * @condition: binding state of the interface: not bound, binding * (in probe()), bound to a driver, or unbinding (in disconnect()) + * @is_active: flag set when the interface is bound and not suspended. + * @needs_remote_wakeup: flag set when the driver requires remote-wakeup + * capability during autosuspend. * @dev: driver model's view of this device * @class_dev: driver model's class view of this device. + * @pm_usage_cnt: PM usage counter for this interface; autosuspend is not + * allowed unless the counter is 0. * * USB device drivers attach to interfaces on a physical device. Each * interface encapsulates a single high level function, such as feeding @@ -142,8 +148,12 @@ struct usb_interface { int minor; /* minor number this interface is * bound to */ enum usb_interface_condition condition; /* state of binding */ + unsigned is_active:1; /* the interface is not suspended */ + unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ + struct device dev; /* interface specific device info */ struct class_device *class_dev; + int pm_usage_cnt; /* usage counter for autosuspend */ }; #define to_usb_interface(d) container_of(d, struct usb_interface, dev) #define interface_to_usbdev(intf) \ @@ -254,8 +264,6 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, /* ----------------------------------------------------------------------- */ -struct usb_operations; - /* USB device number allocation bitmap */ struct usb_devmap { unsigned long devicemap[128 / (8*sizeof(unsigned long))]; @@ -268,6 +276,7 @@ struct usb_bus { struct device *controller; /* host/master side hardware */ int busnum; /* Bus number (in order of reg) */ char *bus_name; /* stable id (PCI slot_name etc) */ + u8 uses_dma; /* Does the host controller use DMA? */ u8 otg_port; /* 0, or number of OTG/HNP port */ unsigned is_b_host:1; /* true during some HNP roleswitches */ unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */ @@ -276,10 +285,8 @@ struct usb_bus { * round-robin allocation */ struct usb_devmap devmap; /* device address allocation map */ - struct usb_operations *op; /* Operations (specific to the HC) */ struct usb_device *root_hub; /* Root hub */ struct list_head bus_list; /* list of busses */ - void *hcpriv; /* Host Controller private data */ int bandwidth_allocated; /* on this bus: how much of the time * reserved for periodic (intr/iso) @@ -294,8 +301,6 @@ struct usb_bus { struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */ struct class_device *class_dev; /* class device for this bus */ - struct kref kref; /* reference counting for this bus */ - void (*release)(struct usb_bus *bus); #if defined(CONFIG_USB_MON) struct mon_bus *mon_bus; /* non-null when associated */ @@ -350,6 +355,7 @@ struct usb_device { unsigned short bus_mA; /* Current available from the bus */ u8 portnum; /* Parent port number (origin 1) */ + u8 level; /* Number of USB hub ancestors */ int have_langid; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ @@ -373,6 +379,15 @@ struct usb_device { int maxchild; /* Number of ports if hub */ struct usb_device *children[USB_MAXCHILDREN]; + +#ifdef CONFIG_PM + struct work_struct autosuspend; /* for delayed autosuspends */ + struct mutex pm_mutex; /* protects PM operations */ + int pm_usage_cnt; /* usage counter for autosuspend */ + + unsigned auto_pm:1; /* autosuspend/resume in progress */ + unsigned do_remote_wakeup:1; /* remote wakeup should be enabled */ +#endif }; #define to_usb_device(d) container_of(d, struct usb_device, dev) @@ -384,7 +399,7 @@ extern void usb_put_dev(struct usb_device *dev); #define usb_unlock_device(udev) up(&(udev)->dev.sem) #define usb_trylock_device(udev) down_trylock(&(udev)->dev.sem) extern int usb_lock_device_for_reset(struct usb_device *udev, - struct usb_interface *iface); + const struct usb_interface *iface); /* USB port reset for device reinitialization */ extern int usb_reset_device(struct usb_device *dev); @@ -393,6 +408,17 @@ extern int usb_reset_composite_device(struct usb_device *dev, extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id); +/* USB autosuspend and autoresume */ +#ifdef CONFIG_USB_SUSPEND +extern int usb_autopm_get_interface(struct usb_interface *intf); +extern void usb_autopm_put_interface(struct usb_interface *intf); + +#else +#define usb_autopm_get_interface(intf) 0 +#define usb_autopm_put_interface(intf) do {} while (0) +#endif + + /*-------------------------------------------------------------------------*/ /* for drivers using iso endpoints */ @@ -423,10 +449,10 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface, extern struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor); -extern struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, +extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev, unsigned ifnum); extern struct usb_host_interface *usb_altnum_to_altsetting( - struct usb_interface *intf, unsigned int altnum); + const struct usb_interface *intf, unsigned int altnum); /** @@ -464,6 +490,20 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, /*-------------------------------------------------------------------------*/ +extern int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd); +extern int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd); + +/*-------------------------------------------------------------------------*/ + #define USB_DEVICE_ID_MATCH_DEVICE \ (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) #define USB_DEVICE_ID_MATCH_DEV_RANGE \ @@ -540,7 +580,17 @@ struct usb_dynids { }; /** - * struct usb_driver - identifies USB driver to usbcore + * struct usbdrv_wrap - wrapper for driver-model structure + * @driver: The driver-model core driver structure. + * @for_devices: Non-zero for device drivers, 0 for interface drivers. + */ +struct usbdrv_wrap { + struct device_driver driver; + int for_devices; +}; + +/** + * struct usb_driver - identifies USB interface driver to usbcore * @name: The driver name should be unique among USB drivers, * and should normally be the same as the module name. * @probe: Called to see if the driver is willing to manage a particular @@ -567,12 +617,14 @@ struct usb_dynids { * or your driver's probe function will never get called. * @dynids: used internally to hold the list of dynamically added device * ids for this driver. - * @driver: the driver model core driver structure. + * @drvwrap: Driver-model core structure wrapper. * @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be * added to this driver by preventing the sysfs file from being created. + * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend + * for interfaces bound to this driver. * - * USB drivers must provide a name, probe() and disconnect() methods, - * and an id_table. Other driver fields are optional. + * USB interface drivers must provide a name, probe() and disconnect() + * methods, and an id_table. Other driver fields are optional. * * The id_table is used in hotplugging. It holds a set of descriptors, * and specialized data may be associated with each entry. That table @@ -606,10 +658,44 @@ struct usb_driver { const struct usb_device_id *id_table; struct usb_dynids dynids; - struct device_driver driver; + struct usbdrv_wrap drvwrap; unsigned int no_dynamic_id:1; + unsigned int supports_autosuspend:1; }; -#define to_usb_driver(d) container_of(d, struct usb_driver, driver) +#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver) + +/** + * struct usb_device_driver - identifies USB device driver to usbcore + * @name: The driver name should be unique among USB drivers, + * and should normally be the same as the module name. + * @probe: Called to see if the driver is willing to manage a particular + * device. If it is, probe returns zero and uses dev_set_drvdata() + * to associate driver-specific data with the device. If unwilling + * to manage the device, return a negative errno value. + * @disconnect: Called when the device is no longer accessible, usually + * because it has been (or is being) disconnected or the driver's + * module is being unloaded. + * @suspend: Called when the device is going to be suspended by the system. + * @resume: Called when the device is being resumed by the system. + * @drvwrap: Driver-model core structure wrapper. + * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend + * for devices bound to this driver. + * + * USB drivers must provide all the fields listed above except drvwrap. + */ +struct usb_device_driver { + const char *name; + + int (*probe) (struct usb_device *udev); + void (*disconnect) (struct usb_device *udev); + + int (*suspend) (struct usb_device *udev, pm_message_t message); + int (*resume) (struct usb_device *udev); + struct usbdrv_wrap drvwrap; + unsigned int supports_autosuspend:1; +}; +#define to_usb_device_driver(d) container_of(d, struct usb_device_driver, \ + drvwrap.driver) extern struct bus_type usb_bus_type; @@ -633,13 +719,17 @@ struct usb_class_driver { * use these in module_init()/module_exit() * and don't forget MODULE_DEVICE_TABLE(usb, ...) */ -int usb_register_driver(struct usb_driver *, struct module *); +extern int usb_register_driver(struct usb_driver *, struct module *); static inline int usb_register(struct usb_driver *driver) { return usb_register_driver(driver, THIS_MODULE); } extern void usb_deregister(struct usb_driver *); +extern int usb_register_device_driver(struct usb_device_driver *, + struct module *); +extern void usb_deregister_device_driver(struct usb_device_driver *); + extern int usb_register_dev(struct usb_interface *intf, struct usb_class_driver *class_driver); extern void usb_deregister_dev(struct usb_interface *intf, @@ -885,7 +975,7 @@ struct urb * @setup_packet: pointer to the setup_packet buffer * @transfer_buffer: pointer to the transfer buffer * @buffer_length: length of the transfer buffer - * @complete: pointer to the usb_complete_t function + * @complete_fn: pointer to the usb_complete_t function * @context: what to set the urb context to. * * Initializes a control urb with the proper information needed to submit @@ -897,7 +987,7 @@ static inline void usb_fill_control_urb (struct urb *urb, unsigned char *setup_packet, void *transfer_buffer, int buffer_length, - usb_complete_t complete, + usb_complete_t complete_fn, void *context) { spin_lock_init(&urb->lock); @@ -906,7 +996,7 @@ static inline void usb_fill_control_urb (struct urb *urb, urb->setup_packet = setup_packet; urb->transfer_buffer = transfer_buffer; urb->transfer_buffer_length = buffer_length; - urb->complete = complete; + urb->complete = complete_fn; urb->context = context; } @@ -917,7 +1007,7 @@ static inline void usb_fill_control_urb (struct urb *urb, * @pipe: the endpoint pipe * @transfer_buffer: pointer to the transfer buffer * @buffer_length: length of the transfer buffer - * @complete: pointer to the usb_complete_t function + * @complete_fn: pointer to the usb_complete_t function * @context: what to set the urb context to. * * Initializes a bulk urb with the proper information needed to submit it @@ -928,7 +1018,7 @@ static inline void usb_fill_bulk_urb (struct urb *urb, unsigned int pipe, void *transfer_buffer, int buffer_length, - usb_complete_t complete, + usb_complete_t complete_fn, void *context) { spin_lock_init(&urb->lock); @@ -936,7 +1026,7 @@ static inline void usb_fill_bulk_urb (struct urb *urb, urb->pipe = pipe; urb->transfer_buffer = transfer_buffer; urb->transfer_buffer_length = buffer_length; - urb->complete = complete; + urb->complete = complete_fn; urb->context = context; } @@ -947,7 +1037,7 @@ static inline void usb_fill_bulk_urb (struct urb *urb, * @pipe: the endpoint pipe * @transfer_buffer: pointer to the transfer buffer * @buffer_length: length of the transfer buffer - * @complete: pointer to the usb_complete_t function + * @complete_fn: pointer to the usb_complete_t function * @context: what to set the urb context to. * @interval: what to set the urb interval to, encoded like * the endpoint descriptor's bInterval value. @@ -963,7 +1053,7 @@ static inline void usb_fill_int_urb (struct urb *urb, unsigned int pipe, void *transfer_buffer, int buffer_length, - usb_complete_t complete, + usb_complete_t complete_fn, void *context, int interval) { @@ -972,7 +1062,7 @@ static inline void usb_fill_int_urb (struct urb *urb, urb->pipe = pipe; urb->transfer_buffer = transfer_buffer; urb->transfer_buffer_length = buffer_length; - urb->complete = complete; + urb->complete = complete_fn; urb->context = context; if (dev->speed == USB_SPEED_HIGH) urb->interval = 1 << (interval - 1); @@ -990,7 +1080,6 @@ extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags); extern int usb_unlink_urb(struct urb *urb); extern void usb_kill_urb(struct urb *urb); -#define HAVE_USB_BUFFERS void *usb_buffer_alloc (struct usb_device *dev, size_t size, gfp_t mem_flags, dma_addr_t *dma); void usb_buffer_free (struct usb_device *dev, size_t size, @@ -1003,14 +1092,14 @@ void usb_buffer_unmap (struct urb *urb); #endif struct scatterlist; -int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe, - struct scatterlist *sg, int nents); +int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe, + struct scatterlist *sg, int nents); #if 0 -void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe, - struct scatterlist *sg, int n_hw_ents); +void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe, + struct scatterlist *sg, int n_hw_ents); #endif -void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, - struct scatterlist *sg, int n_hw_ents); +void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe, + struct scatterlist *sg, int n_hw_ents); /*-------------------------------------------------------------------* * SYNCHRONOUS CALL SUPPORT * @@ -1038,6 +1127,9 @@ extern int usb_clear_halt(struct usb_device *dev, int pipe); extern int usb_reset_configuration(struct usb_device *dev); extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); +/* this request isn't really synchronous, but it belongs with the others */ +extern int usb_driver_set_configuration(struct usb_device *udev, int config); + /* * timeouts, in milliseconds, used for sending/receiving control messages * they typically complete within a few frames (msec) after they're issued |