diff options
Diffstat (limited to 'include/linux/usb.h')
| -rw-r--r-- | include/linux/usb.h | 85 |
1 files changed, 82 insertions, 3 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h index 94bd38a6d94..7a60946df3b 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -146,6 +146,10 @@ struct usb_interface { * active alternate setting */ unsigned num_altsetting; /* number of alternate settings */ + /* If there is an interface association descriptor then it will list + * the associated interfaces */ + struct usb_interface_assoc_descriptor *intf_assoc; + int minor; /* minor number this interface is * bound to */ enum usb_interface_condition condition; /* state of binding */ @@ -175,6 +179,7 @@ void usb_put_intf(struct usb_interface *intf); /* this maximum is arbitrary */ #define USB_MAXINTERFACES 32 +#define USB_MAXIADS USB_MAXINTERFACES/2 /** * struct usb_interface_cache - long-term representation of a device interface @@ -245,6 +250,11 @@ struct usb_host_config { struct usb_config_descriptor desc; char *string; /* iConfiguration string, if present */ + + /* List of any Interface Association Descriptors in this + * configuration. */ + struct usb_interface_assoc_descriptor *intf_assoc[USB_MAXIADS]; + /* the interfaces associated with this configuration, * stored in no particular order */ struct usb_interface *interface[USB_MAXINTERFACES]; @@ -403,6 +413,8 @@ struct usb_device { unsigned auto_pm:1; /* autosuspend/resume in progress */ unsigned do_remote_wakeup:1; /* remote wakeup should be enabled */ + unsigned reset_resume:1; /* needs reset instead of resume */ + unsigned persist_enabled:1; /* USB_PERSIST enabled for this dev */ unsigned autosuspend_disabled:1; /* autosuspend and autoresume */ unsigned autoresume_disabled:1; /* disabled by the user */ #endif @@ -729,6 +741,22 @@ static inline int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor .bcdDevice_lo = (lo), .bcdDevice_hi = (hi) /** + * USB_DEVICE_INTERFACE_PROTOCOL - macro used to describe a usb + * device with a specific interface protocol + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @pr: bInterfaceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific interface protocol of devices. + */ +#define USB_DEVICE_INTERFACE_PROTOCOL(vend,prod,pr) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceProtocol = (pr) + +/** * USB_DEVICE_INFO - macro used to describe a class of usb devices * @cl: bDeviceClass value * @sc: bDeviceSubClass value @@ -754,6 +782,28 @@ static inline int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), \ .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr) +/** + * USB_DEVICE_AND_INTERFACE_INFO - macro used to describe a specific usb device + * with a class of usb interfaces + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @cl: bInterfaceClass value + * @sc: bInterfaceSubClass value + * @pr: bInterfaceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific device with a specific class of interfaces. + * + * This is especially useful when explicitly matching devices that have + * vendor specific bDeviceClass values, but standards-compliant interfaces. + */ +#define USB_DEVICE_AND_INTERFACE_INFO(vend,prod,cl,sc,pr) \ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \ + | USB_DEVICE_ID_MATCH_DEVICE, \ + .idVendor = (vend), .idProduct = (prod), \ + .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr) + /* ----------------------------------------------------------------------- */ /* Stuff for dynamic usb ids */ @@ -800,10 +850,15 @@ struct usbdrv_wrap { * do (or don't) show up otherwise in the filesystem. * @suspend: Called when the device is going to be suspended by the system. * @resume: Called when the device is being resumed by the system. + * @reset_resume: Called when the suspended device has been reset instead + * of being resumed. * @pre_reset: Called by usb_reset_composite_device() when the device * is about to be reset. * @post_reset: Called by usb_reset_composite_device() after the device - * has been reset. + * has been reset, or in lieu of @resume following a reset-resume + * (i.e., the device is reset instead of being resumed, as might + * happen if power was lost). The second argument tells which is + * the reason. * @id_table: USB drivers use ID table to support hotplugging. * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set * or your driver's probe function will never get called. @@ -843,9 +898,10 @@ struct usb_driver { int (*suspend) (struct usb_interface *intf, pm_message_t message); int (*resume) (struct usb_interface *intf); + int (*reset_resume)(struct usb_interface *intf); - void (*pre_reset) (struct usb_interface *intf); - void (*post_reset) (struct usb_interface *intf); + int (*pre_reset)(struct usb_interface *intf); + int (*post_reset)(struct usb_interface *intf); const struct usb_device_id *id_table; @@ -948,6 +1004,7 @@ extern int usb_disabled(void); #define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ #define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt * needed */ +#define URB_FREE_BUFFER 0x0100 /* Free transfer buffer with the URB */ struct usb_iso_packet_descriptor { unsigned int offset; @@ -958,11 +1015,26 @@ struct usb_iso_packet_descriptor { struct urb; +struct usb_anchor { + struct list_head urb_list; + wait_queue_head_t wait; + spinlock_t lock; +}; + +static inline void init_usb_anchor(struct usb_anchor *anchor) +{ + INIT_LIST_HEAD(&anchor->urb_list); + init_waitqueue_head(&anchor->wait); + spin_lock_init(&anchor->lock); +} + typedef void (*usb_complete_t)(struct urb *); /** * struct urb - USB Request Block * @urb_list: For use by current owner of the URB. + * @anchor_list: membership in the list of an anchor + * @anchor: to anchor URBs to a common mooring * @pipe: Holds endpoint number, direction, type, and more. * Create these values with the eight macros available; * usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl" @@ -1135,6 +1207,8 @@ struct urb /* public: documented fields in the urb that can be used by drivers */ struct list_head urb_list; /* list head for use by the urb's * current owner */ + struct list_head anchor_list; /* the URB may be anchored by the driver */ + struct usb_anchor *anchor; struct usb_device *dev; /* (in) pointer to associated device */ unsigned int pipe; /* (in) pipe information */ int status; /* (return) non-ISO status */ @@ -1270,6 +1344,11 @@ extern struct urb *usb_get_urb(struct urb *urb); extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags); extern int usb_unlink_urb(struct urb *urb); extern void usb_kill_urb(struct urb *urb); +extern void usb_kill_anchored_urbs(struct usb_anchor *anchor); +extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor); +extern void usb_unanchor_urb(struct urb *urb); +extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor, + unsigned int timeout); void *usb_buffer_alloc (struct usb_device *dev, size_t size, gfp_t mem_flags, dma_addr_t *dma); |