summaryrefslogtreecommitdiffstats
path: root/include/linux/usb.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/usb.h')
-rw-r--r--include/linux/usb.h79
1 files changed, 66 insertions, 13 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 73b68d1f2cb..dea39dc551d 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -351,10 +351,6 @@ struct usb_bus {
int bandwidth_int_reqs; /* number of Interrupt requests */
int bandwidth_isoc_reqs; /* number of Isoc. requests */
-#ifdef CONFIG_USB_DEVICEFS
- struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
-#endif
-
#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
struct mon_bus *mon_bus; /* non-null when associated */
int monitored; /* non-zero when monitored */
@@ -382,6 +378,45 @@ enum usb_device_removable {
USB_DEVICE_FIXED,
};
+/*
+ * USB 3.0 Link Power Management (LPM) parameters.
+ *
+ * PEL and SEL are USB 3.0 Link PM latencies for device-initiated LPM exit.
+ * MEL is the USB 3.0 Link PM latency for host-initiated LPM exit.
+ * All three are stored in nanoseconds.
+ */
+struct usb3_lpm_parameters {
+ /*
+ * Maximum exit latency (MEL) for the host to send a packet to the
+ * device (either a Ping for isoc endpoints, or a data packet for
+ * interrupt endpoints), the hubs to decode the packet, and for all hubs
+ * in the path to transition the links to U0.
+ */
+ unsigned int mel;
+ /*
+ * Maximum exit latency for a device-initiated LPM transition to bring
+ * all links into U0. Abbreviated as "PEL" in section 9.4.12 of the USB
+ * 3.0 spec, with no explanation of what "P" stands for. "Path"?
+ */
+ unsigned int pel;
+
+ /*
+ * The System Exit Latency (SEL) includes PEL, and three other
+ * latencies. After a device initiates a U0 transition, it will take
+ * some time from when the device sends the ERDY to when it will finally
+ * receive the data packet. Basically, SEL should be the worse-case
+ * latency from when a device starts initiating a U0 transition to when
+ * it will get data.
+ */
+ unsigned int sel;
+ /*
+ * The idle timeout value that is currently programmed into the parent
+ * hub for this device. When the timer counts to zero, the parent hub
+ * will initiate an LPM transition to either U1 or U2.
+ */
+ int timeout;
+};
+
/**
* struct usb_device - kernel's representation of a USB device
* @devnum: device number; address on a USB bus
@@ -439,6 +474,12 @@ enum usb_device_removable {
* specific data for the device.
* @slot_id: Slot ID assigned by xHCI
* @removable: Device can be physically removed from this port
+ * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout.
+ * @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout.
+ * @lpm_disable_count: Ref count used by usb_disable_lpm() and usb_enable_lpm()
+ * to keep track of the number of functions that require USB 3.0 Link Power
+ * Management to be disabled for this usb_device. This count should only
+ * be manipulated by those functions, with the bandwidth_mutex is held.
*
* Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use
@@ -485,6 +526,7 @@ struct usb_device {
unsigned lpm_capable:1;
unsigned usb2_hw_lpm_capable:1;
unsigned usb2_hw_lpm_enabled:1;
+ unsigned usb3_lpm_enabled:1;
int string_langid;
/* static strings from the device */
@@ -493,12 +535,6 @@ struct usb_device {
char *serial;
struct list_head filelist;
-#ifdef CONFIG_USB_DEVICE_CLASS
- struct device *usb_classdev;
-#endif
-#ifdef CONFIG_USB_DEVICEFS
- struct dentry *usbfs_dentry;
-#endif
int maxchild;
struct usb_device **children;
@@ -517,6 +553,10 @@ struct usb_device {
struct wusb_dev *wusb_dev;
int slot_id;
enum usb_device_removable removable;
+ struct usb3_lpm_parameters u1_params;
+ struct usb3_lpm_parameters u2_params;
+ unsigned lpm_disable_count;
+ unsigned hub_initiated_lpm_disable_count;
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
@@ -583,6 +623,12 @@ static inline void usb_mark_last_busy(struct usb_device *udev)
{ }
#endif
+extern int usb_disable_lpm(struct usb_device *udev);
+extern void usb_enable_lpm(struct usb_device *udev);
+/* Same as above, but these functions lock/unlock the bandwidth_mutex. */
+extern int usb_unlocked_disable_lpm(struct usb_device *udev);
+extern void usb_unlocked_enable_lpm(struct usb_device *udev);
+
/*-------------------------------------------------------------------------*/
/* for drivers using iso endpoints */
@@ -800,6 +846,8 @@ extern ssize_t usb_store_new_id(struct usb_dynids *dynids,
struct device_driver *driver,
const char *buf, size_t count);
+extern ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf);
+
/**
* struct usbdrv_wrap - wrapper for driver-model structure
* @driver: The driver-model core driver structure.
@@ -850,6 +898,9 @@ struct usbdrv_wrap {
* for interfaces bound to this driver.
* @soft_unbind: if set to 1, the USB core will not kill URBs and disable
* endpoints before calling the driver's disconnect method.
+ * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs
+ * to initiate lower power link state transitions when an idle timeout
+ * occurs. Device-initiated USB 3.0 link PM will still be allowed.
*
* USB interface drivers must provide a name, probe() and disconnect()
* methods, and an id_table. Other driver fields are optional.
@@ -890,6 +941,7 @@ struct usb_driver {
struct usbdrv_wrap drvwrap;
unsigned int no_dynamic_id:1;
unsigned int supports_autosuspend:1;
+ unsigned int disable_hub_initiated_lpm:1;
unsigned int soft_unbind:1;
};
#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
@@ -1379,6 +1431,7 @@ extern int usb_unlink_urb(struct urb *urb);
extern void usb_kill_urb(struct urb *urb);
extern void usb_poison_urb(struct urb *urb);
extern void usb_unpoison_urb(struct urb *urb);
+extern void usb_block_urb(struct urb *urb);
extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
@@ -1391,6 +1444,8 @@ extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor);
extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor);
extern int usb_anchor_empty(struct usb_anchor *anchor);
+#define usb_unblock_urb usb_unpoison_urb
+
/**
* usb_urb_dir_in - check if an URB describes an IN transfer
* @urb: URB to be checked
@@ -1627,6 +1682,7 @@ static inline int usb_translate_errors(int error_code)
case 0:
case -ENOMEM:
case -ENODEV:
+ case -EOPNOTSUPP:
return error_code;
default:
return -EIO;
@@ -1652,9 +1708,6 @@ do { \
} while (0)
#endif
-#define err(format, arg...) \
- printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg)
-
/* debugfs stuff */
extern struct dentry *usb_debug_root;