diff options
Diffstat (limited to 'include/linux/usb.h')
| -rw-r--r-- | include/linux/usb.h | 42 |
1 files changed, 33 insertions, 9 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h index 0eec2689b95..7454865ad14 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -337,6 +337,7 @@ struct usb_bus { * the ep queue on a short transfer * with the URB_SHORT_NOT_OK flag set. */ + unsigned no_sg_constraint:1; /* no sg constraint */ unsigned sg_tablesize; /* 0 or largest number of sg list entries */ int devnum_next; /* Next open device number in @@ -474,7 +475,8 @@ struct usb3_lpm_parameters { * @lpm_capable: device supports LPM * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM * @usb2_hw_lpm_besl_capable: device can perform USB2 hardware BESL LPM - * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled + * @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled + * @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled * @usb3_lpm_enabled: USB3 hardware LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) @@ -547,6 +549,7 @@ struct usb_device { unsigned usb2_hw_lpm_capable:1; unsigned usb2_hw_lpm_besl_capable:1; unsigned usb2_hw_lpm_enabled:1; + unsigned usb2_hw_lpm_allowed:1; unsigned usb3_lpm_enabled:1; int string_langid; @@ -684,6 +687,11 @@ static inline bool usb_device_supports_ltm(struct usb_device *udev) return udev->bos->ss_cap->bmAttributes & USB_LTM_SUPPORT; } +static inline bool usb_device_no_sg_constraint(struct usb_device *udev) +{ + return udev && udev->bus && udev->bus->no_sg_constraint; +} + /*-------------------------------------------------------------------------*/ @@ -696,7 +704,7 @@ extern int usb_alloc_streams(struct usb_interface *interface, unsigned int num_streams, gfp_t mem_flags); /* Reverts a group of bulk endpoints back to not using stream IDs. */ -extern void usb_free_streams(struct usb_interface *interface, +extern int usb_free_streams(struct usb_interface *interface, struct usb_host_endpoint **eps, unsigned int num_eps, gfp_t mem_flags); @@ -708,7 +716,10 @@ extern int usb_driver_claim_interface(struct usb_driver *driver, * usb_interface_claimed - returns true iff an interface is claimed * @iface: the interface being checked * - * Returns true (nonzero) iff the interface is claimed, else false (zero). + * Return: %true (nonzero) iff the interface is claimed, else %false + * (zero). + * + * Note: * Callers must own the driver model's usb bus readlock. So driver * probe() entries don't need extra locking, but other call contexts * may need to explicitly claim that lock. @@ -745,8 +756,9 @@ extern struct usb_host_interface *usb_find_alt_setting( * @buf: where to put the string * @size: how big is "buf"? * - * Returns length of the string (> 0) or negative if size was too small. + * Return: Length of the string (> 0) or negative if size was too small. * + * Note: * This identifier is intended to be "stable", reflecting physical paths in * hardware such as physical bus addresses for host controllers or ports on * USB hubs. That makes it stay the same until systems are physically @@ -1199,11 +1211,13 @@ struct usb_anchor { struct list_head urb_list; wait_queue_head_t wait; spinlock_t lock; + atomic_t suspend_wakeups; unsigned int poisoned:1; }; static inline void init_usb_anchor(struct usb_anchor *anchor) { + memset(anchor, 0, sizeof(*anchor)); INIT_LIST_HEAD(&anchor->urb_list); init_waitqueue_head(&anchor->wait); spin_lock_init(&anchor->lock); @@ -1247,7 +1261,9 @@ typedef void (*usb_complete_t)(struct urb *); * the device driver is saying that it provided this DMA address, * which the host controller driver should use in preference to the * transfer_buffer. - * @sg: scatter gather buffer list + * @sg: scatter gather buffer list, the buffer size of each element in + * the list (except the last) must be divisible by the endpoint's + * max packet size if no_sg_constraint isn't set in 'struct usb_bus' * @num_mapped_sgs: (internal) number of mapped sg entries * @num_sgs: number of entries in the sg list * @transfer_buffer_length: How big is transfer_buffer. The transfer may @@ -1534,10 +1550,16 @@ static inline void usb_fill_int_urb(struct urb *urb, urb->transfer_buffer_length = buffer_length; urb->complete = complete_fn; urb->context = context; - if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) + + if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) { + /* make sure interval is within allowed range */ + interval = clamp(interval, 1, 16); + urb->interval = 1 << (interval - 1); - else + } else { urb->interval = interval; + } + urb->start_frame = -1; } @@ -1556,6 +1578,8 @@ extern void usb_kill_anchored_urbs(struct usb_anchor *anchor); extern void usb_poison_anchored_urbs(struct usb_anchor *anchor); extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor); extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor); +extern void usb_anchor_suspend_wakeups(struct usb_anchor *anchor); +extern void usb_anchor_resume_wakeups(struct usb_anchor *anchor); extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor); extern void usb_unanchor_urb(struct urb *urb); extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor, @@ -1570,7 +1594,7 @@ extern int usb_anchor_empty(struct usb_anchor *anchor); * usb_urb_dir_in - check if an URB describes an IN transfer * @urb: URB to be checked * - * Returns 1 if @urb describes an IN transfer (device-to-host), + * Return: 1 if @urb describes an IN transfer (device-to-host), * otherwise 0. */ static inline int usb_urb_dir_in(struct urb *urb) @@ -1582,7 +1606,7 @@ static inline int usb_urb_dir_in(struct urb *urb) * usb_urb_dir_out - check if an URB describes an OUT transfer * @urb: URB to be checked * - * Returns 1 if @urb describes an OUT transfer (host-to-device), + * Return: 1 if @urb describes an OUT transfer (host-to-device), * otherwise 0. */ static inline int usb_urb_dir_out(struct urb *urb) |