diff options
Diffstat (limited to 'include/linux/usb/gadget.h')
| -rw-r--r-- | include/linux/usb/gadget.h | 26 |
1 files changed, 18 insertions, 8 deletions
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 1d3a67523ff..da653b5c713 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/slab.h> +#include <linux/scatterlist.h> #include <linux/types.h> #include <linux/usb/ch9.h> @@ -32,6 +33,9 @@ struct usb_ep; * @dma: DMA address corresponding to 'buf'. If you don't set this * field, and the usb controller needs one, it is responsible * for mapping and unmapping the buffer. + * @sg: a scatterlist for SG-capable controllers. + * @num_sgs: number of SG entries + * @num_mapped_sgs: number of SG entries mapped to DMA (internal) * @length: Length of that data * @stream_id: The stream id, when USB3.0 bulk streams are being used * @no_interrupt: If true, hints that no completion irq is needed. @@ -88,6 +92,10 @@ struct usb_request { unsigned length; dma_addr_t dma; + struct scatterlist *sg; + unsigned num_sgs; + unsigned num_mapped_sgs; + unsigned stream_id:16; unsigned no_interrupt:1; unsigned zero:1; @@ -164,7 +172,7 @@ struct usb_ep { unsigned maxpacket:16; unsigned max_streams:16; unsigned mult:2; - unsigned maxburst:4; + unsigned maxburst:5; u8 address; const struct usb_endpoint_descriptor *desc; const struct usb_ss_ep_comp_descriptor *comp_desc; @@ -477,8 +485,9 @@ struct usb_gadget_ops { * driver setup() requests * @ep_list: List of other endpoints supported by the device. * @speed: Speed of current connection to USB host. - * @is_dualspeed: True if the controller supports both high and full speed - * operation. If it does, the gadget driver must also support both. + * @max_speed: Maximal speed the UDC can handle. UDC must support this + * and all slower speeds. + * @sg_supported: true if we can handle scatter-gather * @is_otg: True if the USB device port uses a Mini-AB jack, so that the * gadget driver must provide a USB OTG descriptor. * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable @@ -518,7 +527,8 @@ struct usb_gadget { struct usb_ep *ep0; struct list_head ep_list; /* of usb_ep */ enum usb_device_speed speed; - unsigned is_dualspeed:1; + enum usb_device_speed max_speed; + unsigned sg_supported:1; unsigned is_otg:1; unsigned is_a_peripheral:1; unsigned b_hnp_enable:1; @@ -549,7 +559,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) static inline int gadget_is_dualspeed(struct usb_gadget *g) { #ifdef CONFIG_USB_GADGET_DUALSPEED - /* runtime test would check "g->is_dualspeed" ... that might be + /* runtime test would check "g->max_speed" ... that might be * useful to work around hardware bugs, but is mostly pointless */ return 1; @@ -567,7 +577,7 @@ static inline int gadget_is_superspeed(struct usb_gadget *g) { #ifdef CONFIG_USB_GADGET_SUPERSPEED /* - * runtime test would check "g->is_superspeed" ... that might be + * runtime test would check "g->max_speed" ... that might be * useful to work around hardware bugs, but is mostly pointless */ return 1; @@ -760,7 +770,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) /** * struct usb_gadget_driver - driver for usb 'slave' devices * @function: String describing the gadget's function - * @speed: Highest speed the driver handles. + * @max_speed: Highest speed the driver handles. * @setup: Invoked for ep0 control requests that aren't handled by * the hardware level driver. Most calls must be handled by * the gadget driver, including descriptor and configuration @@ -824,7 +834,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) */ struct usb_gadget_driver { char *function; - enum usb_device_speed speed; + enum usb_device_speed max_speed; void (*unbind)(struct usb_gadget *); int (*setup)(struct usb_gadget *, const struct usb_ctrlrequest *); |