diff options
Diffstat (limited to 'include/linux/usb/isp1301.h')
| -rw-r--r-- | include/linux/usb/isp1301.h | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/include/linux/usb/isp1301.h b/include/linux/usb/isp1301.h new file mode 100644 index 00000000000..d3a851c28b6 --- /dev/null +++ b/include/linux/usb/isp1301.h @@ -0,0 +1,80 @@ +/* + * NXP ISP1301 USB transceiver driver + * + * Copyright (C) 2012 Roland Stigge <stigge@antcom.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_USB_ISP1301_H +#define __LINUX_USB_ISP1301_H + +#include <linux/of.h> + +/* I2C Register definitions: */ + +#define ISP1301_I2C_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ + +#define MC1_SPEED_REG (1 << 0) +#define MC1_SUSPEND_REG (1 << 1) +#define MC1_DAT_SE0 (1 << 2) +#define MC1_TRANSPARENT (1 << 3) +#define MC1_BDIS_ACON_EN (1 << 4) +#define MC1_OE_INT_EN (1 << 5) +#define MC1_UART_EN (1 << 6) +#define MC1_MASK 0x7f + +#define ISP1301_I2C_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ + +#define MC2_GLOBAL_PWR_DN (1 << 0) +#define MC2_SPD_SUSP_CTRL (1 << 1) +#define MC2_BI_DI (1 << 2) +#define MC2_TRANSP_BDIR0 (1 << 3) +#define MC2_TRANSP_BDIR1 (1 << 4) +#define MC2_AUDIO_EN (1 << 5) +#define MC2_PSW_EN (1 << 6) +#define MC2_EN2V7 (1 << 7) + +#define ISP1301_I2C_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ + +#define OTG1_DP_PULLUP (1 << 0) +#define OTG1_DM_PULLUP (1 << 1) +#define OTG1_DP_PULLDOWN (1 << 2) +#define OTG1_DM_PULLDOWN (1 << 3) +#define OTG1_ID_PULLDOWN (1 << 4) +#define OTG1_VBUS_DRV (1 << 5) +#define OTG1_VBUS_DISCHRG (1 << 6) +#define OTG1_VBUS_CHRG (1 << 7) + +#define ISP1301_I2C_OTG_CONTROL_2 0x10 /* u8 readonly */ + +#define OTG_B_SESS_END (1 << 6) +#define OTG_B_SESS_VLD (1 << 7) + +#define ISP1301_I2C_INTERRUPT_SOURCE 0x8 +#define ISP1301_I2C_INTERRUPT_LATCH 0xA +#define ISP1301_I2C_INTERRUPT_FALLING 0xC +#define ISP1301_I2C_INTERRUPT_RISING 0xE + +#define INT_VBUS_VLD (1 << 0) +#define INT_SESS_VLD (1 << 1) +#define INT_DP_HI (1 << 2) +#define INT_ID_GND (1 << 3) +#define INT_DM_HI (1 << 4) +#define INT_ID_FLOAT (1 << 5) +#define INT_BDIS_ACON (1 << 6) +#define INT_CR_INT (1 << 7) + +#define ISP1301_I2C_REG_CLEAR_ADDR 1 /* Register Address Modifier */ + +struct i2c_client *isp1301_get_client(struct device_node *node); + +#endif /* __LINUX_USB_ISP1301_H */ |