diff options
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/ch9.h | 183 | ||||
| -rw-r--r-- | include/linux/usb/composite.h | 8 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 6 | ||||
| -rw-r--r-- | include/linux/usb/otg.h | 8 | ||||
| -rw-r--r-- | include/linux/usb/quirks.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/serial.h | 3 |
6 files changed, 206 insertions, 5 deletions
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 9b42baed390..b145119a90d 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -102,7 +102,7 @@ #define USB_REQ_LOOPBACK_DATA_READ 0x16 #define USB_REQ_SET_INTERFACE_DS 0x17 -/* The Link Power Mangement (LPM) ECN defines USB_REQ_TEST_AND_SET command, +/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, * used by hubs to put ports into a new L1 suspend state, except that it * forgot to define its number ... */ @@ -353,6 +353,185 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_XFER_INT 3 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 +/*-------------------------------------------------------------------------*/ + +/** + * usb_endpoint_num - get the endpoint's number + * @epd: endpoint to be checked + * + * Returns @epd's number: 0 to 15. + */ +static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) +{ + return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; +} + +/** + * usb_endpoint_type - get the endpoint's transfer type + * @epd: endpoint to be checked + * + * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according + * to @epd's transfer type. + */ +static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; +} + +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +static inline int usb_endpoint_dir_out( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_bulk( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_control - check if the endpoint has control transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type control, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_control( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_int( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_isoc( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_in( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_out( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_in( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_out( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_in( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_out( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); +} /*-------------------------------------------------------------------------*/ @@ -584,8 +763,8 @@ enum usb_device_state { /* chapter 9 and authentication (wireless) device states */ USB_STATE_ATTACHED, USB_STATE_POWERED, /* wired */ - USB_STATE_UNAUTHENTICATED, /* auth */ USB_STATE_RECONNECTING, /* auth */ + USB_STATE_UNAUTHENTICATED, /* auth */ USB_STATE_DEFAULT, /* limited function */ USB_STATE_ADDRESS, USB_STATE_CONFIGURED, /* most functions */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 935c380ffe4..acd7b0f06c8 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -244,6 +244,10 @@ int usb_add_config(struct usb_composite_dev *, * value; it should return zero on successful initialization. * @unbind: Reverses @bind(); called as a side effect of unregistering * this driver. + * @suspend: Notifies when the host stops sending USB traffic, + * after function notifications + * @resume: Notifies configuration when the host restarts USB traffic, + * before function notifications * * Devices default to reporting self powered operation. Devices which rely * on bus powered operation should report this in their @bind() method. @@ -268,6 +272,10 @@ struct usb_composite_driver { int (*bind)(struct usb_composite_dev *); int (*unbind)(struct usb_composite_dev *); + + /* global suspend hooks */ + void (*suspend)(struct usb_composite_dev *); + void (*resume)(struct usb_composite_dev *); }; extern int usb_composite_register(struct usb_composite_driver *); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 0460a746480..bbf45d500b6 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -598,6 +598,7 @@ static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget) /** * usb_gadget_vbus_connect - Notify controller that VBUS is powered * @gadget:The device which now has VBUS power. + * Context: can sleep * * This call is used by a driver for an external transceiver (or GPIO) * that detects a VBUS power session starting. Common responses include @@ -636,6 +637,7 @@ static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) /** * usb_gadget_vbus_disconnect - notify controller about VBUS session end * @gadget:the device whose VBUS supply is being described + * Context: can sleep * * This call is used by a driver for an external transceiver (or GPIO) * that detects a VBUS power session ending. Common responses include @@ -792,19 +794,20 @@ struct usb_gadget_driver { /** * usb_gadget_register_driver - register a gadget driver * @driver:the driver being registered + * Context: can sleep * * Call this in your gadget driver's module initialization function, * to tell the underlying usb controller driver about your driver. * The driver's bind() function will be called to bind it to a * gadget before this registration call returns. It's expected that * the bind() functions will be in init sections. - * This function must be called in a context that can sleep. */ int usb_gadget_register_driver(struct usb_gadget_driver *driver); /** * usb_gadget_unregister_driver - unregister a gadget driver * @driver:the driver being unregistered + * Context: can sleep * * Call this in your gadget driver's module cleanup function, * to tell the underlying usb controller that your driver is @@ -813,7 +816,6 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver); * to unbind() and clean up any device state, before this procedure * finally returns. It's expected that the unbind() functions * will in in exit sections, so may not be linked in some kernels. - * This function must be called in a context that can sleep. */ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver); diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 94df4fe6c6c..1aaa826396a 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -80,12 +80,17 @@ struct otg_transceiver { /* for board-specific init logic */ extern int otg_set_transceiver(struct otg_transceiver *); +#ifdef CONFIG_NOP_USB_XCEIV +extern void usb_nop_xceiv_register(void); +extern void usb_nop_xceiv_unregister(void); +#endif /* for usb host and peripheral controller drivers */ extern struct otg_transceiver *otg_get_transceiver(void); extern void otg_put_transceiver(struct otg_transceiver *); +/* Context: can sleep */ static inline int otg_start_hnp(struct otg_transceiver *otg) { @@ -102,6 +107,8 @@ otg_set_host(struct otg_transceiver *otg, struct usb_bus *host) /* for usb peripheral controller drivers */ + +/* Context: can sleep */ static inline int otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph) { @@ -114,6 +121,7 @@ otg_set_power(struct otg_transceiver *otg, unsigned mA) return otg->set_power(otg, mA); } +/* Context: can sleep */ static inline int otg_set_suspend(struct otg_transceiver *otg, int suspend) { diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index 7f6c603db65..2526f3bbd27 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -16,4 +16,7 @@ /* device can't handle Set-Interface requests */ #define USB_QUIRK_NO_SET_INTF 0x00000004 +/* device can't handle its Configuration or Interface strings */ +#define USB_QUIRK_CONFIG_INTF_STRINGS 0x00000008 + #endif /* __LINUX_USB_QUIRKS_H */ diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 0b8617a9176..b9584254259 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -130,7 +130,8 @@ struct usb_serial { struct usb_device *dev; struct usb_serial_driver *type; struct usb_interface *interface; - unsigned char disconnected; + unsigned char disconnected:1; + unsigned char suspending:1; unsigned char minor; unsigned char num_ports; unsigned char num_port_pointers; |