diff options
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/cdc.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/ch9.h | 183 | ||||
| -rw-r--r-- | include/linux/usb/composite.h | 8 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 6 | ||||
| -rw-r--r-- | include/linux/usb/musb.h | 5 | ||||
| -rw-r--r-- | include/linux/usb/otg.h | 8 | ||||
| -rw-r--r-- | include/linux/usb/quirks.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/rndis_host.h | 85 | ||||
| -rw-r--r-- | include/linux/usb/serial.h | 10 | ||||
| -rw-r--r-- | include/linux/usb/usbnet.h | 5 | ||||
| -rw-r--r-- | include/linux/usb/wusb.h | 3 |
11 files changed, 266 insertions, 53 deletions
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 3c86ed25a04..c24124a42ce 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -17,6 +17,7 @@ #define USB_CDC_SUBCLASS_DMM 0x09 #define USB_CDC_SUBCLASS_MDLM 0x0a #define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c #define USB_CDC_PROTO_NONE 0 @@ -28,6 +29,8 @@ #define USB_CDC_ACM_PROTO_AT_CDMA 6 #define USB_CDC_ACM_PROTO_VENDOR 0xff +#define USB_CDC_PROTO_EEM 7 + /*-------------------------------------------------------------------------*/ /* diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 9b42baed390..b145119a90d 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -102,7 +102,7 @@ #define USB_REQ_LOOPBACK_DATA_READ 0x16 #define USB_REQ_SET_INTERFACE_DS 0x17 -/* The Link Power Mangement (LPM) ECN defines USB_REQ_TEST_AND_SET command, +/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, * used by hubs to put ports into a new L1 suspend state, except that it * forgot to define its number ... */ @@ -353,6 +353,185 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_XFER_INT 3 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 +/*-------------------------------------------------------------------------*/ + +/** + * usb_endpoint_num - get the endpoint's number + * @epd: endpoint to be checked + * + * Returns @epd's number: 0 to 15. + */ +static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) +{ + return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; +} + +/** + * usb_endpoint_type - get the endpoint's transfer type + * @epd: endpoint to be checked + * + * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according + * to @epd's transfer type. + */ +static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; +} + +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +static inline int usb_endpoint_dir_out( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_bulk( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_control - check if the endpoint has control transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type control, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_control( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_int( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_isoc( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_in( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_out( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_in( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_out( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_in( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_out( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); +} /*-------------------------------------------------------------------------*/ @@ -584,8 +763,8 @@ enum usb_device_state { /* chapter 9 and authentication (wireless) device states */ USB_STATE_ATTACHED, USB_STATE_POWERED, /* wired */ - USB_STATE_UNAUTHENTICATED, /* auth */ USB_STATE_RECONNECTING, /* auth */ + USB_STATE_UNAUTHENTICATED, /* auth */ USB_STATE_DEFAULT, /* limited function */ USB_STATE_ADDRESS, USB_STATE_CONFIGURED, /* most functions */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 935c380ffe4..acd7b0f06c8 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -244,6 +244,10 @@ int usb_add_config(struct usb_composite_dev *, * value; it should return zero on successful initialization. * @unbind: Reverses @bind(); called as a side effect of unregistering * this driver. + * @suspend: Notifies when the host stops sending USB traffic, + * after function notifications + * @resume: Notifies configuration when the host restarts USB traffic, + * before function notifications * * Devices default to reporting self powered operation. Devices which rely * on bus powered operation should report this in their @bind() method. @@ -268,6 +272,10 @@ struct usb_composite_driver { int (*bind)(struct usb_composite_dev *); int (*unbind)(struct usb_composite_dev *); + + /* global suspend hooks */ + void (*suspend)(struct usb_composite_dev *); + void (*resume)(struct usb_composite_dev *); }; extern int usb_composite_register(struct usb_composite_driver *); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 0460a746480..bbf45d500b6 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -598,6 +598,7 @@ static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget) /** * usb_gadget_vbus_connect - Notify controller that VBUS is powered * @gadget:The device which now has VBUS power. + * Context: can sleep * * This call is used by a driver for an external transceiver (or GPIO) * that detects a VBUS power session starting. Common responses include @@ -636,6 +637,7 @@ static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) /** * usb_gadget_vbus_disconnect - notify controller about VBUS session end * @gadget:the device whose VBUS supply is being described + * Context: can sleep * * This call is used by a driver for an external transceiver (or GPIO) * that detects a VBUS power session ending. Common responses include @@ -792,19 +794,20 @@ struct usb_gadget_driver { /** * usb_gadget_register_driver - register a gadget driver * @driver:the driver being registered + * Context: can sleep * * Call this in your gadget driver's module initialization function, * to tell the underlying usb controller driver about your driver. * The driver's bind() function will be called to bind it to a * gadget before this registration call returns. It's expected that * the bind() functions will be in init sections. - * This function must be called in a context that can sleep. */ int usb_gadget_register_driver(struct usb_gadget_driver *driver); /** * usb_gadget_unregister_driver - unregister a gadget driver * @driver:the driver being unregistered + * Context: can sleep * * Call this in your gadget driver's module cleanup function, * to tell the underlying usb controller that your driver is @@ -813,7 +816,6 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver); * to unbind() and clean up any device state, before this procedure * finally returns. It's expected that the unbind() functions * will in in exit sections, so may not be linked in some kernels. - * This function must be called in a context that can sleep. */ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver); diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index d6aad0ea603..d4375566926 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -7,6 +7,9 @@ * key configuration differences between boards. */ +#ifndef __LINUX_USB_MUSB_H +#define __LINUX_USB_MUSB_H + /* The USB role is defined by the connector used on the board, so long as * standards are being followed. (Developer boards sometimes won't.) */ @@ -101,3 +104,5 @@ extern int __init tusb6010_setup_interface( extern int tusb6010_platform_retime(unsigned is_refclk); #endif /* OMAP2 */ + +#endif /* __LINUX_USB_MUSB_H */ diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 94df4fe6c6c..1aaa826396a 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -80,12 +80,17 @@ struct otg_transceiver { /* for board-specific init logic */ extern int otg_set_transceiver(struct otg_transceiver *); +#ifdef CONFIG_NOP_USB_XCEIV +extern void usb_nop_xceiv_register(void); +extern void usb_nop_xceiv_unregister(void); +#endif /* for usb host and peripheral controller drivers */ extern struct otg_transceiver *otg_get_transceiver(void); extern void otg_put_transceiver(struct otg_transceiver *); +/* Context: can sleep */ static inline int otg_start_hnp(struct otg_transceiver *otg) { @@ -102,6 +107,8 @@ otg_set_host(struct otg_transceiver *otg, struct usb_bus *host) /* for usb peripheral controller drivers */ + +/* Context: can sleep */ static inline int otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph) { @@ -114,6 +121,7 @@ otg_set_power(struct otg_transceiver *otg, unsigned mA) return otg->set_power(otg, mA); } +/* Context: can sleep */ static inline int otg_set_suspend(struct otg_transceiver *otg, int suspend) { diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index 7f6c603db65..2526f3bbd27 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -16,4 +16,7 @@ /* device can't handle Set-Interface requests */ #define USB_QUIRK_NO_SET_INTF 0x00000004 +/* device can't handle its Configuration or Interface strings */ +#define USB_QUIRK_CONFIG_INTF_STRINGS 0x00000008 + #endif /* __LINUX_USB_QUIRKS_H */ diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h index 0a6e6d4b929..37836b937d9 100644 --- a/include/linux/usb/rndis_host.h +++ b/include/linux/usb/rndis_host.h @@ -49,48 +49,45 @@ struct rndis_msg_hdr { */ #define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000) - -#define ccpu2 __constant_cpu_to_le32 - -#define RNDIS_MSG_COMPLETION ccpu2(0x80000000) +#define RNDIS_MSG_COMPLETION cpu_to_le32(0x80000000) /* codes for "msg_type" field of rndis messages; * only the data channel uses packet messages (maybe batched); * everything else goes on the control channel. */ -#define RNDIS_MSG_PACKET ccpu2(0x00000001) /* 1-N packets */ -#define RNDIS_MSG_INIT ccpu2(0x00000002) +#define RNDIS_MSG_PACKET cpu_to_le32(0x00000001) /* 1-N packets */ +#define RNDIS_MSG_INIT cpu_to_le32(0x00000002) #define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION) -#define RNDIS_MSG_HALT ccpu2(0x00000003) -#define RNDIS_MSG_QUERY ccpu2(0x00000004) +#define RNDIS_MSG_HALT cpu_to_le32(0x00000003) +#define RNDIS_MSG_QUERY cpu_to_le32(0x00000004) #define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION) -#define RNDIS_MSG_SET ccpu2(0x00000005) +#define RNDIS_MSG_SET cpu_to_le32(0x00000005) #define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION) -#define RNDIS_MSG_RESET ccpu2(0x00000006) +#define RNDIS_MSG_RESET cpu_to_le32(0x00000006) #define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION) -#define RNDIS_MSG_INDICATE ccpu2(0x00000007) -#define RNDIS_MSG_KEEPALIVE ccpu2(0x00000008) +#define RNDIS_MSG_INDICATE cpu_to_le32(0x00000007) +#define RNDIS_MSG_KEEPALIVE cpu_to_le32(0x00000008) #define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION) /* codes for "status" field of completion messages */ -#define RNDIS_STATUS_SUCCESS ccpu2(0x00000000) -#define RNDIS_STATUS_FAILURE ccpu2(0xc0000001) -#define RNDIS_STATUS_INVALID_DATA ccpu2(0xc0010015) -#define RNDIS_STATUS_NOT_SUPPORTED ccpu2(0xc00000bb) -#define RNDIS_STATUS_MEDIA_CONNECT ccpu2(0x4001000b) -#define RNDIS_STATUS_MEDIA_DISCONNECT ccpu2(0x4001000c) +#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000) +#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001) +#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015) +#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb) +#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b) +#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c) /* codes for OID_GEN_PHYSICAL_MEDIUM */ -#define RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED ccpu2(0x00000000) -#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN ccpu2(0x00000001) -#define RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM ccpu2(0x00000002) -#define RNDIS_PHYSICAL_MEDIUM_PHONE_LINE ccpu2(0x00000003) -#define RNDIS_PHYSICAL_MEDIUM_POWER_LINE ccpu2(0x00000004) -#define RNDIS_PHYSICAL_MEDIUM_DSL ccpu2(0x00000005) -#define RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL ccpu2(0x00000006) -#define RNDIS_PHYSICAL_MEDIUM_1394 ccpu2(0x00000007) -#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN ccpu2(0x00000008) -#define RNDIS_PHYSICAL_MEDIUM_MAX ccpu2(0x00000009) +#define RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED cpu_to_le32(0x00000000) +#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN cpu_to_le32(0x00000001) +#define RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM cpu_to_le32(0x00000002) +#define RNDIS_PHYSICAL_MEDIUM_PHONE_LINE cpu_to_le32(0x00000003) +#define RNDIS_PHYSICAL_MEDIUM_POWER_LINE cpu_to_le32(0x00000004) +#define RNDIS_PHYSICAL_MEDIUM_DSL cpu_to_le32(0x00000005) +#define RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL cpu_to_le32(0x00000006) +#define RNDIS_PHYSICAL_MEDIUM_1394 cpu_to_le32(0x00000007) +#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN cpu_to_le32(0x00000008) +#define RNDIS_PHYSICAL_MEDIUM_MAX cpu_to_le32(0x00000009) struct rndis_data_hdr { __le32 msg_type; /* RNDIS_MSG_PACKET */ @@ -228,24 +225,24 @@ struct rndis_keepalive_c { /* IN (optionally OUT) */ * there are gobs more that may optionally be supported. We'll avoid as much * of that mess as possible. */ -#define OID_802_3_PERMANENT_ADDRESS ccpu2(0x01010101) -#define OID_GEN_MAXIMUM_FRAME_SIZE ccpu2(0x00010106) -#define OID_GEN_CURRENT_PACKET_FILTER ccpu2(0x0001010e) -#define OID_GEN_PHYSICAL_MEDIUM ccpu2(0x00010202) +#define OID_802_3_PERMANENT_ADDRESS cpu_to_le32(0x01010101) +#define OID_GEN_MAXIMUM_FRAME_SIZE cpu_to_le32(0x00010106) +#define OID_GEN_CURRENT_PACKET_FILTER cpu_to_le32(0x0001010e) +#define OID_GEN_PHYSICAL_MEDIUM cpu_to_le32(0x00010202) /* packet filter bits used by OID_GEN_CURRENT_PACKET_FILTER */ -#define RNDIS_PACKET_TYPE_DIRECTED ccpu2(0x00000001) -#define RNDIS_PACKET_TYPE_MULTICAST ccpu2(0x00000002) -#define RNDIS_PACKET_TYPE_ALL_MULTICAST ccpu2(0x00000004) -#define RNDIS_PACKET_TYPE_BROADCAST ccpu2(0x00000008) -#define RNDIS_PACKET_TYPE_SOURCE_ROUTING ccpu2(0x00000010) -#define RNDIS_PACKET_TYPE_PROMISCUOUS ccpu2(0x00000020) -#define RNDIS_PACKET_TYPE_SMT ccpu2(0x00000040) -#define RNDIS_PACKET_TYPE_ALL_LOCAL ccpu2(0x00000080) -#define RNDIS_PACKET_TYPE_GROUP ccpu2(0x00001000) -#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL ccpu2(0x00002000) -#define RNDIS_PACKET_TYPE_FUNCTIONAL ccpu2(0x00004000) -#define RNDIS_PACKET_TYPE_MAC_FRAME ccpu2(0x00008000) +#define RNDIS_PACKET_TYPE_DIRECTED cpu_to_le32(0x00000001) +#define RNDIS_PACKET_TYPE_MULTICAST cpu_to_le32(0x00000002) +#define RNDIS_PACKET_TYPE_ALL_MULTICAST cpu_to_le32(0x00000004) +#define RNDIS_PACKET_TYPE_BROADCAST cpu_to_le32(0x00000008) +#define RNDIS_PACKET_TYPE_SOURCE_ROUTING cpu_to_le32(0x00000010) +#define RNDIS_PACKET_TYPE_PROMISCUOUS cpu_to_le32(0x00000020) +#define RNDIS_PACKET_TYPE_SMT cpu_to_le32(0x00000040) +#define RNDIS_PACKET_TYPE_ALL_LOCAL cpu_to_le32(0x00000080) +#define RNDIS_PACKET_TYPE_GROUP cpu_to_le32(0x00001000) +#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL cpu_to_le32(0x00002000) +#define RNDIS_PACKET_TYPE_FUNCTIONAL cpu_to_le32(0x00004000) +#define RNDIS_PACKET_TYPE_MAC_FRAME cpu_to_le32(0x00008000) /* default filter used with RNDIS devices */ #define RNDIS_DEFAULT_FILTER ( \ diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 0b8617a9176..625e9e4639c 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -29,7 +29,7 @@ /** * usb_serial_port: structure for the specific ports of a device. * @serial: pointer back to the struct usb_serial owner of this port. - * @tty: pointer to the corresponding tty for this port. + * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. * @mutex: mutex used to synchronize serial_open() and serial_close() * access for this port. @@ -44,19 +44,22 @@ * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe * for this port. * @bulk_in_buffer: pointer to the bulk in buffer for this port. + * @bulk_in_size: the size of the bulk_in_buffer, in bytes. * @read_urb: pointer to the bulk in struct urb for this port. * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this * port. * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. + * @write_urb_busy: port`s writing status * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. * @write_wait: a wait_queue_head_t used by the port. * @work: work queue entry for the line discipline waking up. - * @open_count: number of times this port has been opened. * @throttled: nonzero if the read urb is inactive to throttle the device * @throttle_req: nonzero if the tty wants to throttle us + * @console: attached usb serial console + * @dev: pointer to the serial device * * This structure is used by the usb-serial core and drivers for the specific * ports of a device. @@ -130,7 +133,8 @@ struct usb_serial { struct usb_device *dev; struct usb_serial_driver *type; struct usb_interface *interface; - unsigned char disconnected; + unsigned char disconnected:1; + unsigned char suspending:1; unsigned char minor; unsigned char num_ports; unsigned char num_port_pointers; diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 7d382224307..36fabb95c7d 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -176,6 +176,11 @@ struct skb_data { /* skb->cb is one of these */ size_t length; }; +extern int usbnet_open (struct net_device *net); +extern int usbnet_stop (struct net_device *net); +extern int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net); +extern void usbnet_tx_timeout (struct net_device *net); +extern int usbnet_change_mtu (struct net_device *net, int new_mtu); extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *); extern void usbnet_defer_kevent (struct usbnet *, int); diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h index 5f401b644ed..429c631d2aa 100644 --- a/include/linux/usb/wusb.h +++ b/include/linux/usb/wusb.h @@ -80,8 +80,7 @@ struct wusb_ckhdid { u8 data[16]; } __attribute__((packed)); -const static -struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } }; +static const struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } }; #define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1) |