summaryrefslogtreecommitdiffstats
path: root/include/linux/usb
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/usb')
-rw-r--r--include/linux/usb/Kbuild1
-rw-r--r--include/linux/usb/ch11.h46
-rw-r--r--include/linux/usb/ch9.h4
-rw-r--r--include/linux/usb/ehci_def.h4
-rw-r--r--include/linux/usb/hcd.h43
-rw-r--r--include/linux/usb/msm_hsusb.h2
-rw-r--r--include/linux/usb/otg.h7
-rw-r--r--include/linux/usb/serial.h9
-rw-r--r--include/linux/usb/ulpi.h5
9 files changed, 94 insertions, 27 deletions
diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
index 51410e0200c..ed91fb62674 100644
--- a/include/linux/usb/Kbuild
+++ b/include/linux/usb/Kbuild
@@ -2,6 +2,7 @@ header-y += audio.h
header-y += cdc.h
header-y += ch9.h
header-y += ch11.h
+header-y += functionfs.h
header-y += gadgetfs.h
header-y += midi.h
header-y += g_printer.h
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 10ec0699bea..4ebaf082417 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -26,6 +26,7 @@
#define HUB_RESET_TT 9
#define HUB_GET_TT_STATE 10
#define HUB_STOP_TT 11
+#define HUB_SET_DEPTH 12
/*
* Hub class additional requests defined by USB 3.0 spec
@@ -61,6 +62,12 @@
#define USB_PORT_FEAT_TEST 21
#define USB_PORT_FEAT_INDICATOR 22
#define USB_PORT_FEAT_C_PORT_L1 23
+#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
+#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27
+#define USB_PORT_FEAT_BH_PORT_RESET 28
+#define USB_PORT_FEAT_C_BH_PORT_RESET 29
+#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
/*
* Port feature selectors added by USB 3.0 spec.
@@ -102,7 +109,6 @@ struct usb_port_status {
#define USB_PORT_STAT_TEST 0x0800
#define USB_PORT_STAT_INDICATOR 0x1000
/* bits 13 to 15 are reserved */
-#define USB_PORT_STAT_SUPER_SPEED 0x8000 /* Linux-internal */
/*
* Additions to wPortStatus bit field from USB 3.0
@@ -110,8 +116,14 @@ struct usb_port_status {
*/
#define USB_PORT_STAT_LINK_STATE 0x01e0
#define USB_SS_PORT_STAT_POWER 0x0200
+#define USB_SS_PORT_STAT_SPEED 0x1c00
#define USB_PORT_STAT_SPEED_5GBPS 0x0000
/* Valid only if port is enabled */
+/* Bits that are the same from USB 2.0 */
+#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \
+ USB_PORT_STAT_ENABLE | \
+ USB_PORT_STAT_OVERCURRENT | \
+ USB_PORT_STAT_RESET)
/*
* Definitions for PORT_LINK_STATE values
@@ -132,8 +144,8 @@ struct usb_port_status {
/*
* wPortChange bit field
- * See USB 2.0 spec Table 11-22
- * Bits 0 to 4 shown, bits 5 to 15 are reserved
+ * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
+ * Bits 0 to 5 shown, bits 6 to 15 are reserved
*/
#define USB_PORT_STAT_C_CONNECTION 0x0001
#define USB_PORT_STAT_C_ENABLE 0x0002
@@ -141,6 +153,13 @@ struct usb_port_status {
#define USB_PORT_STAT_C_OVERCURRENT 0x0008
#define USB_PORT_STAT_C_RESET 0x0010
#define USB_PORT_STAT_C_L1 0x0020
+/*
+ * USB 3.0 wPortChange bit fields
+ * See USB 3.0 spec Table 10-11
+ */
+#define USB_PORT_STAT_C_BH_RESET 0x0020
+#define USB_PORT_STAT_C_LINK_STATE 0x0040
+#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080
/*
* wHubCharacteristics (masks)
@@ -175,7 +194,9 @@ struct usb_hub_status {
*/
#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
+#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a)
#define USB_DT_HUB_NONVAR_SIZE 7
+#define USB_DT_SS_HUB_SIZE 12
struct usb_hub_descriptor {
__u8 bDescLength;
@@ -184,11 +205,22 @@ struct usb_hub_descriptor {
__le16 wHubCharacteristics;
__u8 bPwrOn2PwrGood;
__u8 bHubContrCurrent;
- /* add 1 bit for hub status change; round to bytes */
- __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
- __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
-} __attribute__ ((packed));
+ /* 2.0 and 3.0 hubs differ here */
+ union {
+ struct {
+ /* add 1 bit for hub status change; round to bytes */
+ __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
+ __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
+ } __attribute__ ((packed)) hs;
+
+ struct {
+ __u8 bHubHdrDecLat;
+ __u16 wHubDelay;
+ __u16 DeviceRemovable;
+ } __attribute__ ((packed)) ss;
+ } u;
+} __attribute__ ((packed));
/* port indicator status selectors, tables 11-7 and 11-25 */
#define HUB_LED_AUTO 0
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index ab461948b57..b72f305ce6b 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -584,7 +584,9 @@ struct usb_ss_ep_comp_descriptor {
#define USB_DT_SS_EP_COMP_SIZE 6
/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-#define USB_SS_MAX_STREAMS(p) (1 << (p & 0x1f))
+#define USB_SS_MAX_STREAMS(p) (1 << ((p) & 0x1f))
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p) (1 + ((p) & 0x3))
/*-------------------------------------------------------------------------*/
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index 2e262cb1542..65638024519 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -127,7 +127,9 @@ struct ehci_regs {
#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
/* 19:16 for port testing */
-#define PORT_TEST_PKT (0x4<<16) /* Port Test Control - packet test */
+#define PORT_TEST(x) (((x)&0xf)<<16) /* Port Test Control */
+#define PORT_TEST_PKT PORT_TEST(0x4) /* Port Test Control - packet test */
+#define PORT_TEST_FORCE PORT_TEST(0x5) /* Port Test Control - force enable */
#define PORT_LED_OFF (0<<14)
#define PORT_LED_AMBER (1<<14)
#define PORT_LED_GREEN (2<<14)
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index a854fe89484..0097136ba45 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -76,6 +76,10 @@ struct usb_hcd {
struct kref kref; /* reference counter */
const char *product_desc; /* product/vendor string */
+ int speed; /* Speed for this roothub.
+ * May be different from
+ * hcd->driver->flags & HCD_MASK
+ */
char irq_descr[24]; /* driver + bus # */
struct timer_list rh_timer; /* drives root-hub polling */
@@ -99,6 +103,8 @@ struct usb_hcd {
#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
+#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
+#define HCD_FLAG_DEAD 6 /* controller has died? */
/* The flags can be tested using these macros; they are likely to
* be slightly faster than test_bit().
@@ -108,6 +114,8 @@ struct usb_hcd {
#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
+#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
/* Flags that get set only during HCD registration or removal. */
unsigned rh_registered:1;/* is root hub registered? */
@@ -138,7 +146,9 @@ struct usb_hcd {
* bandwidth_mutex should be dropped after a successful control message
* to the device, or resetting the bandwidth after a failed attempt.
*/
- struct mutex bandwidth_mutex;
+ struct mutex *bandwidth_mutex;
+ struct usb_hcd *shared_hcd;
+ struct usb_hcd *primary_hcd;
#define HCD_BUFFER_POOLS 4
@@ -201,6 +211,7 @@ struct hc_driver {
int flags;
#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
+#define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
#define HCD_USB11 0x0010 /* USB 1.1 */
#define HCD_USB2 0x0020 /* USB 2.0 */
#define HCD_USB3 0x0040 /* USB 3.0 */
@@ -234,6 +245,19 @@ struct hc_driver {
int (*urb_dequeue)(struct usb_hcd *hcd,
struct urb *urb, int status);
+ /*
+ * (optional) these hooks allow an HCD to override the default DMA
+ * mapping and unmapping routines. In general, they shouldn't be
+ * necessary unless the host controller has special DMA requirements,
+ * such as alignment contraints. If these are not specified, the
+ * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
+ * (and it may be a good idea to call these functions in your HCD
+ * implementation)
+ */
+ int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+ void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
+
/* hw synch, freeing endpoint resources that urb_dequeue can't */
void (*endpoint_disable)(struct usb_hcd *hcd,
struct usb_host_endpoint *ep);
@@ -330,8 +354,10 @@ extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
extern int usb_hcd_unlink_urb(struct urb *urb, int status);
extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
int status);
-extern void unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
-extern void unmap_urb_for_dma(struct usb_hcd *, struct urb *);
+extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
extern void usb_hcd_flush_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
@@ -347,8 +373,12 @@ extern int usb_hcd_get_frame_number(struct usb_device *udev);
extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
struct device *dev, const char *bus_name);
+extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+ struct device *dev, const char *bus_name,
+ struct usb_hcd *shared_hcd);
extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
extern void usb_put_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
extern int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags);
extern void usb_remove_hcd(struct usb_hcd *hcd);
@@ -622,13 +652,6 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
/*-------------------------------------------------------------------------*/
-/* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
-/* bleech -- resurfaced in 2.4.11 or 2.4.12 */
-#define bitmap DeviceRemovable
-
-
-/*-------------------------------------------------------------------------*/
-
/* random stuff */
#define RUN_CONTEXT (in_irq() ? "in_irq" \
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 3675e03b153..3657403eac1 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -55,7 +55,7 @@ enum otg_control_type {
/**
* struct msm_otg_platform_data - platform device data
- * for msm72k_otg driver.
+ * for msm_otg driver.
* @phy_init_seq: PHY configuration sequence. val, reg pairs
* terminated by -1.
* @vbus_power: VBUS power on/off routine.
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index a1a1e7a73ec..6e40718f5ab 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -66,6 +66,7 @@ struct otg_transceiver {
u8 default_a;
enum usb_otg_state state;
+ enum usb_xceiv_events last_event;
struct usb_bus *host;
struct usb_gadget *gadget;
@@ -74,7 +75,7 @@ struct otg_transceiver {
void __iomem *io_priv;
/* for notification of usb_xceiv_events */
- struct blocking_notifier_head notifier;
+ struct atomic_notifier_head notifier;
/* to pass extra port status to the root hub */
u16 port_status;
@@ -234,13 +235,13 @@ otg_start_srp(struct otg_transceiver *otg)
static inline int
otg_register_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
{
- return blocking_notifier_chain_register(&otg->notifier, nb);
+ return atomic_notifier_chain_register(&otg->notifier, nb);
}
static inline void
otg_unregister_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
{
- blocking_notifier_chain_unregister(&otg->notifier, nb);
+ atomic_notifier_chain_unregister(&otg->notifier, nb);
}
/* for OTG controller drivers (and maybe other stuff) */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index c9049139a7a..b29f70b2eca 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -191,7 +191,8 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
* @id_table: pointer to a list of usb_device_id structures that define all
* of the devices this structure can support.
* @num_ports: the number of different ports this device will have.
- * @bulk_in_size: bytes to allocate for bulk-in buffer (0 = end-point size)
+ * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
+ * (0 = end-point size)
* @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
* @calc_num_ports: pointer to a function to determine how many ports this
* device has dynamically. It will be called after the probe()
@@ -260,7 +261,7 @@ struct usb_serial_driver {
const unsigned char *buf, int count);
/* Called only by the tty layer */
int (*write_room)(struct tty_struct *tty);
- int (*ioctl)(struct tty_struct *tty, struct file *file,
+ int (*ioctl)(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
void (*set_termios)(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
@@ -268,8 +269,8 @@ struct usb_serial_driver {
int (*chars_in_buffer)(struct tty_struct *tty);
void (*throttle)(struct tty_struct *tty);
void (*unthrottle)(struct tty_struct *tty);
- int (*tiocmget)(struct tty_struct *tty, struct file *file);
- int (*tiocmset)(struct tty_struct *tty, struct file *file,
+ int (*tiocmget)(struct tty_struct *tty);
+ int (*tiocmset)(struct tty_struct *tty,
unsigned int set, unsigned int clear);
int (*get_icount)(struct tty_struct *tty,
struct serial_icounter_struct *icount);
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 82b1507f473..9595796d62e 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -184,4 +184,9 @@
struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
unsigned int flags);
+#ifdef CONFIG_USB_ULPI_VIEWPORT
+/* access ops for controllers with a viewport register */
+extern struct otg_io_access_ops ulpi_viewport_access_ops;
+#endif
+
#endif /* __LINUX_USB_ULPI_H */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-19 12:53:06 +0000