diff options
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/Kbuild | 1 | ||||
| -rw-r--r-- | include/linux/usb/ch11.h | 31 | ||||
| -rw-r--r-- | include/linux/usb/ch9.h | 66 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 30 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 5 | ||||
| -rw-r--r-- | include/linux/usb/r8a66597.h | 60 | ||||
| -rw-r--r-- | include/linux/usb/renesas_usbhs.h | 24 | ||||
| -rw-r--r-- | include/linux/usb/serial.h | 11 |
8 files changed, 198 insertions, 30 deletions
diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index ed91fb62674..b607f3532e8 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -7,3 +7,4 @@ header-y += gadgetfs.h header-y += midi.h header-y += g_printer.h header-y += tmc.h +header-y += video.h diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h index 4ebaf082417..31fdb4c6ee3 100644 --- a/include/linux/usb/ch11.h +++ b/include/linux/usb/ch11.h @@ -26,7 +26,6 @@ #define HUB_RESET_TT 9 #define HUB_GET_TT_STATE 10 #define HUB_STOP_TT 11 -#define HUB_SET_DEPTH 12 /* * Hub class additional requests defined by USB 3.0 spec @@ -165,11 +164,20 @@ struct usb_port_status { * wHubCharacteristics (masks) * See USB 2.0 spec Table 11-13, offset 3 */ -#define HUB_CHAR_LPSM 0x0003 /* D1 .. D0 */ -#define HUB_CHAR_COMPOUND 0x0004 /* D2 */ -#define HUB_CHAR_OCPM 0x0018 /* D4 .. D3 */ -#define HUB_CHAR_TTTT 0x0060 /* D6 .. D5 */ -#define HUB_CHAR_PORTIND 0x0080 /* D7 */ +#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ +#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ +#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ +#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ + +#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ + +#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ +#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ +#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ +#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ + +#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ +#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ struct usb_hub_status { __le16 wHubStatus; @@ -198,6 +206,17 @@ struct usb_hub_status { #define USB_DT_HUB_NONVAR_SIZE 7 #define USB_DT_SS_HUB_SIZE 12 +/* + * Hub Device descriptor + * USB Hub class device protocols + */ + +#define USB_HUB_PR_FS 0 /* Full speed hub */ +#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ +#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ +#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ +#define USB_HUB_PR_SS 3 /* Super speed hub */ + struct usb_hub_descriptor { __u8 bDescLength; __u8 bDescriptorType; diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 0fd3fbdd828..61b29057b05 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -34,6 +34,7 @@ #define __LINUX_USB_CH9_H #include <linux/types.h> /* __u8 etc */ +#include <asm/byteorder.h> /* le16_to_cpu */ /*-------------------------------------------------------------------------*/ @@ -143,6 +144,11 @@ #define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ #define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 +/* + * Suspend Options, Table 9-7 USB 3.0 spec + */ +#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) +#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ @@ -377,12 +383,6 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ #define USB_ENDPOINT_DIR_MASK 0x80 -#define USB_ENDPOINT_SYNCTYPE 0x0c -#define USB_ENDPOINT_SYNC_NONE (0 << 2) -#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) -#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) -#define USB_ENDPOINT_SYNC_SYNC (3 << 2) - #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 @@ -390,6 +390,17 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_XFER_INT 3 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + +#define USB_ENDPOINT_USAGE_MASK 0x30 +#define USB_ENDPOINT_USAGE_DATA 0x00 +#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 +#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ + /*-------------------------------------------------------------------------*/ /** @@ -570,6 +581,17 @@ static inline int usb_endpoint_is_isoc_out( return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); } +/** + * usb_endpoint_maxp - get endpoint's max packet size + * @epd: endpoint to be checked + * + * Returns @epd's max packet + */ +static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) +{ + return le16_to_cpu(epd->wMaxPacketSize); +} + /*-------------------------------------------------------------------------*/ /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ @@ -583,8 +605,26 @@ struct usb_ss_ep_comp_descriptor { } __attribute__ ((packed)); #define USB_DT_SS_EP_COMP_SIZE 6 + /* Bits 4:0 of bmAttributes if this is a bulk endpoint */ -#define USB_SS_MAX_STREAMS(p) (1 << ((p) & 0x1f)) +static inline int +usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) +{ + int max_streams; + + if (!comp) + return 0; + + max_streams = comp->bmAttributes & 0x1f; + + if (!max_streams) + return 0; + + max_streams = 1 << max_streams; + + return max_streams; +} + /* Bits 1:0 of bmAttributes if this is an isoc endpoint */ #define USB_SS_MULT(p) (1 + ((p) & 0x3)) @@ -851,6 +891,18 @@ enum usb_device_speed { USB_SPEED_SUPER, /* usb 3.0 */ }; +#ifdef __KERNEL__ + +/** + * usb_speed_string() - Returns human readable-name of the speed. + * @speed: The speed to return human-readable name for. If it's not + * any of the speeds defined in usb_device_speed enum, string for + * USB_SPEED_UNKNOWN will be returned. + */ +extern const char *usb_speed_string(enum usb_device_speed speed); + +#endif + enum usb_device_state { /* NOTATTACHED isn't in the USB spec, and this state acts * the same as ATTACHED ... but it's clearer this way. diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 087f4b93183..da653b5c713 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/slab.h> +#include <linux/scatterlist.h> #include <linux/types.h> #include <linux/usb/ch9.h> @@ -32,6 +33,9 @@ struct usb_ep; * @dma: DMA address corresponding to 'buf'. If you don't set this * field, and the usb controller needs one, it is responsible * for mapping and unmapping the buffer. + * @sg: a scatterlist for SG-capable controllers. + * @num_sgs: number of SG entries + * @num_mapped_sgs: number of SG entries mapped to DMA (internal) * @length: Length of that data * @stream_id: The stream id, when USB3.0 bulk streams are being used * @no_interrupt: If true, hints that no completion irq is needed. @@ -88,6 +92,10 @@ struct usb_request { unsigned length; dma_addr_t dma; + struct scatterlist *sg; + unsigned num_sgs; + unsigned num_mapped_sgs; + unsigned stream_id:16; unsigned no_interrupt:1; unsigned zero:1; @@ -164,7 +172,7 @@ struct usb_ep { unsigned maxpacket:16; unsigned max_streams:16; unsigned mult:2; - unsigned maxburst:4; + unsigned maxburst:5; u8 address; const struct usb_endpoint_descriptor *desc; const struct usb_ss_ep_comp_descriptor *comp_desc; @@ -437,9 +445,9 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep) struct usb_dcd_config_params { __u8 bU1devExitLat; /* U1 Device exit Latency */ -#define USB_DEFULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */ +#define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */ __le16 bU2DevExitLat; /* U2 Device exit Latency */ -#define USB_DEFULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */ +#define USB_DEFAULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */ }; @@ -477,8 +485,9 @@ struct usb_gadget_ops { * driver setup() requests * @ep_list: List of other endpoints supported by the device. * @speed: Speed of current connection to USB host. - * @is_dualspeed: True if the controller supports both high and full speed - * operation. If it does, the gadget driver must also support both. + * @max_speed: Maximal speed the UDC can handle. UDC must support this + * and all slower speeds. + * @sg_supported: true if we can handle scatter-gather * @is_otg: True if the USB device port uses a Mini-AB jack, so that the * gadget driver must provide a USB OTG descriptor. * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable @@ -518,7 +527,8 @@ struct usb_gadget { struct usb_ep *ep0; struct list_head ep_list; /* of usb_ep */ enum usb_device_speed speed; - unsigned is_dualspeed:1; + enum usb_device_speed max_speed; + unsigned sg_supported:1; unsigned is_otg:1; unsigned is_a_peripheral:1; unsigned b_hnp_enable:1; @@ -549,7 +559,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) static inline int gadget_is_dualspeed(struct usb_gadget *g) { #ifdef CONFIG_USB_GADGET_DUALSPEED - /* runtime test would check "g->is_dualspeed" ... that might be + /* runtime test would check "g->max_speed" ... that might be * useful to work around hardware bugs, but is mostly pointless */ return 1; @@ -567,7 +577,7 @@ static inline int gadget_is_superspeed(struct usb_gadget *g) { #ifdef CONFIG_USB_GADGET_SUPERSPEED /* - * runtime test would check "g->is_superspeed" ... that might be + * runtime test would check "g->max_speed" ... that might be * useful to work around hardware bugs, but is mostly pointless */ return 1; @@ -760,7 +770,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) /** * struct usb_gadget_driver - driver for usb 'slave' devices * @function: String describing the gadget's function - * @speed: Highest speed the driver handles. + * @max_speed: Highest speed the driver handles. * @setup: Invoked for ep0 control requests that aren't handled by * the hardware level driver. Most calls must be handled by * the gadget driver, including descriptor and configuration @@ -824,7 +834,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) */ struct usb_gadget_driver { char *function; - enum usb_device_speed speed; + enum usb_device_speed max_speed; void (*unbind)(struct usb_gadget *); int (*setup)(struct usb_gadget *, const struct usb_ctrlrequest *); diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 0097136ba45..b2f62f3a32a 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -99,7 +99,6 @@ struct usb_hcd { */ unsigned long flags; #define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */ -#define HCD_FLAG_SAW_IRQ 1 #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */ #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */ #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */ @@ -110,7 +109,6 @@ struct usb_hcd { * be slightly faster than test_bit(). */ #define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE)) -#define HCD_SAW_IRQ(hcd) ((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ)) #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH)) #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING)) #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) @@ -178,7 +176,7 @@ struct usb_hcd { * this structure. */ unsigned long hcd_priv[0] - __attribute__ ((aligned(sizeof(unsigned long)))); + __attribute__ ((aligned(sizeof(s64)))); }; /* 2.4 does this a bit differently ... */ @@ -343,6 +341,7 @@ struct hc_driver { * address is set */ int (*update_device)(struct usb_hcd *, struct usb_device *); + int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int); }; extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h index b6b8660d0c6..55805f9dcf2 100644 --- a/include/linux/usb/r8a66597.h +++ b/include/linux/usb/r8a66597.h @@ -48,6 +48,9 @@ struct r8a66597_platdata { /* (external controller only) set one = WR0_N shorted to WR1_N */ unsigned wr0_shorted_to_wr1:1; + + /* set one = using SUDMAC */ + unsigned sudmac:1; }; /* Register definitions */ @@ -417,5 +420,62 @@ struct r8a66597_platdata { #define USBSPD 0x00C0 #define RTPORT 0x0001 +/* SUDMAC registers */ +#define CH0CFG 0x00 +#define CH1CFG 0x04 +#define CH0BA 0x10 +#define CH1BA 0x14 +#define CH0BBC 0x18 +#define CH1BBC 0x1C +#define CH0CA 0x20 +#define CH1CA 0x24 +#define CH0CBC 0x28 +#define CH1CBC 0x2C +#define CH0DEN 0x30 +#define CH1DEN 0x34 +#define DSTSCLR 0x38 +#define DBUFCTRL 0x3C +#define DINTCTRL 0x40 +#define DINTSTS 0x44 +#define DINTSTSCLR 0x48 +#define CH0SHCTRL 0x50 +#define CH1SHCTRL 0x54 + +/* SUDMAC Configuration Registers */ +#define SENDBUFM 0x1000 /* b12: Transmit Buffer Mode */ +#define RCVENDM 0x0100 /* b8: Receive Data Transfer End Mode */ +#define LBA_WAIT 0x0030 /* b5-4: Local Bus Access Wait */ + +/* DMA Enable Registers */ +#define DEN 0x0001 /* b1: DMA Transfer Enable */ + +/* DMA Status Clear Register */ +#define CH1STCLR 0x0002 /* b2: Ch1 DMA Status Clear */ +#define CH0STCLR 0x0001 /* b1: Ch0 DMA Status Clear */ + +/* DMA Buffer Control Register */ +#define CH1BUFW 0x0200 /* b9: Ch1 DMA Buffer Data Transfer Enable */ +#define CH0BUFW 0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */ +#define CH1BUFS 0x0002 /* b2: Ch1 DMA Buffer Data Status */ +#define CH0BUFS 0x0001 /* b1: Ch0 DMA Buffer Data Status */ + +/* DMA Interrupt Control Register */ +#define CH1ERRE 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Enable */ +#define CH0ERRE 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */ +#define CH1ENDE 0x0002 /* b2: Ch1 DMA Transfer End Int Enable */ +#define CH0ENDE 0x0001 /* b1: Ch0 DMA Transfer End Int Enable */ + +/* DMA Interrupt Status Register */ +#define CH1ERRS 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Status */ +#define CH0ERRS 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */ +#define CH1ENDS 0x0002 /* b2: Ch1 DMA Transfer End Int Status */ +#define CH0ENDS 0x0001 /* b1: Ch0 DMA Transfer End Int Status */ + +/* DMA Interrupt Status Clear Register */ +#define CH1ERRC 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Stat Clear */ +#define CH0ERRC 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */ +#define CH1ENDC 0x0002 /* b2: Ch1 DMA Transfer End Int Stat Clear */ +#define CH0ENDC 0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */ + #endif /* __LINUX_USB_R8A66597_H */ diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 8977431259c..0d3f9887925 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -67,6 +67,14 @@ struct renesas_usbhs_platform_callback { /* * option: * + * for board specific clock control + */ + void (*power_ctrl)(struct platform_device *pdev, + void __iomem *base, int enable); + + /* + * option: + * * Phy reset for platform */ void (*phy_reset)(struct platform_device *pdev); @@ -82,6 +90,13 @@ struct renesas_usbhs_platform_callback { * get VBUS status function. */ int (*get_vbus)(struct platform_device *pdev); + + /* + * option: + * + * VBUS control is needed for Host + */ + int (*set_vbus)(struct platform_device *pdev, int enable); }; /* @@ -101,6 +116,8 @@ struct renesas_usbhs_driver_param { * option: * * for BUSWAIT :: BWAIT + * see + * renesas_usbhs/common.c :: usbhsc_set_buswait() * */ int buswait_bwait; @@ -109,7 +126,7 @@ struct renesas_usbhs_driver_param { * * delay time from notify_hotplug callback */ - int detection_delay; + int detection_delay; /* msec */ /* * option: @@ -127,6 +144,11 @@ struct renesas_usbhs_driver_param { * pio <--> dma border. */ int pio_dma_border; /* default is 64byte */ + + /* + * option: + */ + u32 has_otg:1; /* for controlling PWEN/EXTLP */ }; /* diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b29f70b2eca..4267a9c717b 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -58,11 +58,13 @@ enum port_dev_state { * @read_urb: pointer to the bulk in struct urb for this port. * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this * port. + * @bulk_in_buffers: pointers to the bulk in buffers for this port + * @read_urbs: pointers to the bulk in urbs for this port + * @read_urbs_free: status bitmap the for bulk in urbs * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. * @write_fifo: kfifo used to buffer outgoing data - * @write_urb_busy: port`s writing status * @bulk_out_buffers: pointers to the bulk out buffers for this port * @write_urbs: pointers to the bulk out urbs for this port * @write_urbs_free: status bitmap the for bulk out urbs @@ -99,11 +101,14 @@ struct usb_serial_port { struct urb *read_urb; __u8 bulk_in_endpointAddress; + unsigned char *bulk_in_buffers[2]; + struct urb *read_urbs[2]; + unsigned long read_urbs_free; + unsigned char *bulk_out_buffer; int bulk_out_size; struct urb *write_urb; struct kfifo write_fifo; - int write_urb_busy; unsigned char *bulk_out_buffers[2]; struct urb *write_urbs[2]; @@ -340,7 +345,7 @@ extern void usb_serial_generic_disconnect(struct usb_serial *serial); extern void usb_serial_generic_release(struct usb_serial *serial); extern int usb_serial_generic_register(int debug); extern void usb_serial_generic_deregister(void); -extern int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, +extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, gfp_t mem_flags); extern void usb_serial_generic_process_read_urb(struct urb *urb); extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, |