summaryrefslogtreecommitdiffstats
path: root/include/linux/usb
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/usb')
-rw-r--r--include/linux/usb/ch9.h29
-rw-r--r--include/linux/usb/gadget.h4
-rw-r--r--include/linux/usb/hcd.h3
-rw-r--r--include/linux/usb/r8a66597.h60
-rw-r--r--include/linux/usb/renesas_usbhs.h14
5 files changed, 107 insertions, 3 deletions
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index f3025359950..d5da6c68c25 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -34,6 +34,7 @@
#define __LINUX_USB_CH9_H
#include <linux/types.h> /* __u8 etc */
+#include <asm/byteorder.h> /* le16_to_cpu */
/*-------------------------------------------------------------------------*/
@@ -143,6 +144,11 @@
#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
+/*
+ * Suspend Options, Table 9-7 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
@@ -575,6 +581,17 @@ static inline int usb_endpoint_is_isoc_out(
return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
}
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+ return le16_to_cpu(epd->wMaxPacketSize);
+}
+
/*-------------------------------------------------------------------------*/
/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
@@ -856,6 +873,18 @@ enum usb_device_speed {
USB_SPEED_SUPER, /* usb 3.0 */
};
+#ifdef __KERNEL__
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for. If it's not
+ * any of the speeds defined in usb_device_speed enum, string for
+ * USB_SPEED_UNKNOWN will be returned.
+ */
+extern const char *usb_speed_string(enum usb_device_speed speed);
+
+#endif
+
enum usb_device_state {
/* NOTATTACHED isn't in the USB spec, and this state acts
* the same as ATTACHED ... but it's clearer this way.
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 087f4b93183..1d3a67523ff 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -437,9 +437,9 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep)
struct usb_dcd_config_params {
__u8 bU1devExitLat; /* U1 Device exit Latency */
-#define USB_DEFULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */
+#define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */
__le16 bU2DevExitLat; /* U2 Device exit Latency */
-#define USB_DEFULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */
+#define USB_DEFAULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */
};
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 0097136ba45..03354d557b7 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -178,7 +178,7 @@ struct usb_hcd {
* this structure.
*/
unsigned long hcd_priv[0]
- __attribute__ ((aligned(sizeof(unsigned long))));
+ __attribute__ ((aligned(sizeof(s64))));
};
/* 2.4 does this a bit differently ... */
@@ -343,6 +343,7 @@ struct hc_driver {
* address is set
*/
int (*update_device)(struct usb_hcd *, struct usb_device *);
+ int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
index b6b8660d0c6..55805f9dcf2 100644
--- a/include/linux/usb/r8a66597.h
+++ b/include/linux/usb/r8a66597.h
@@ -48,6 +48,9 @@ struct r8a66597_platdata {
/* (external controller only) set one = WR0_N shorted to WR1_N */
unsigned wr0_shorted_to_wr1:1;
+
+ /* set one = using SUDMAC */
+ unsigned sudmac:1;
};
/* Register definitions */
@@ -417,5 +420,62 @@ struct r8a66597_platdata {
#define USBSPD 0x00C0
#define RTPORT 0x0001
+/* SUDMAC registers */
+#define CH0CFG 0x00
+#define CH1CFG 0x04
+#define CH0BA 0x10
+#define CH1BA 0x14
+#define CH0BBC 0x18
+#define CH1BBC 0x1C
+#define CH0CA 0x20
+#define CH1CA 0x24
+#define CH0CBC 0x28
+#define CH1CBC 0x2C
+#define CH0DEN 0x30
+#define CH1DEN 0x34
+#define DSTSCLR 0x38
+#define DBUFCTRL 0x3C
+#define DINTCTRL 0x40
+#define DINTSTS 0x44
+#define DINTSTSCLR 0x48
+#define CH0SHCTRL 0x50
+#define CH1SHCTRL 0x54
+
+/* SUDMAC Configuration Registers */
+#define SENDBUFM 0x1000 /* b12: Transmit Buffer Mode */
+#define RCVENDM 0x0100 /* b8: Receive Data Transfer End Mode */
+#define LBA_WAIT 0x0030 /* b5-4: Local Bus Access Wait */
+
+/* DMA Enable Registers */
+#define DEN 0x0001 /* b1: DMA Transfer Enable */
+
+/* DMA Status Clear Register */
+#define CH1STCLR 0x0002 /* b2: Ch1 DMA Status Clear */
+#define CH0STCLR 0x0001 /* b1: Ch0 DMA Status Clear */
+
+/* DMA Buffer Control Register */
+#define CH1BUFW 0x0200 /* b9: Ch1 DMA Buffer Data Transfer Enable */
+#define CH0BUFW 0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */
+#define CH1BUFS 0x0002 /* b2: Ch1 DMA Buffer Data Status */
+#define CH0BUFS 0x0001 /* b1: Ch0 DMA Buffer Data Status */
+
+/* DMA Interrupt Control Register */
+#define CH1ERRE 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Enable */
+#define CH0ERRE 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */
+#define CH1ENDE 0x0002 /* b2: Ch1 DMA Transfer End Int Enable */
+#define CH0ENDE 0x0001 /* b1: Ch0 DMA Transfer End Int Enable */
+
+/* DMA Interrupt Status Register */
+#define CH1ERRS 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Status */
+#define CH0ERRS 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */
+#define CH1ENDS 0x0002 /* b2: Ch1 DMA Transfer End Int Status */
+#define CH0ENDS 0x0001 /* b1: Ch0 DMA Transfer End Int Status */
+
+/* DMA Interrupt Status Clear Register */
+#define CH1ERRC 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Stat Clear */
+#define CH0ERRC 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */
+#define CH1ENDC 0x0002 /* b2: Ch1 DMA Transfer End Int Stat Clear */
+#define CH0ENDC 0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */
+
#endif /* __LINUX_USB_R8A66597_H */
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 8977431259c..e5a40c31854 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -82,6 +82,13 @@ struct renesas_usbhs_platform_callback {
* get VBUS status function.
*/
int (*get_vbus)(struct platform_device *pdev);
+
+ /*
+ * option:
+ *
+ * VBUS control is needed for Host
+ */
+ int (*set_vbus)(struct platform_device *pdev, int enable);
};
/*
@@ -101,6 +108,8 @@ struct renesas_usbhs_driver_param {
* option:
*
* for BUSWAIT :: BWAIT
+ * see
+ * renesas_usbhs/common.c :: usbhsc_set_buswait()
* */
int buswait_bwait;
@@ -127,6 +136,11 @@ struct renesas_usbhs_driver_param {
* pio <--> dma border.
*/
int pio_dma_border; /* default is 64byte */
+
+ /*
+ * option:
+ */
+ u32 has_otg:1; /* for controlling PWEN/EXTLP */
};
/*
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 12:29:34 +0000