diff options
Diffstat (limited to 'include/linux/usb_ch9.h')
| -rw-r--r-- | include/linux/usb_ch9.h | 384 |
1 files changed, 384 insertions, 0 deletions
diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h new file mode 100644 index 00000000000..f5fe94e09a0 --- /dev/null +++ b/include/linux/usb_ch9.h @@ -0,0 +1,384 @@ +/* + * This file holds USB constants and structures that are needed for USB + * device APIs. These are used by the USB device model, which is defined + * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C + * that need these: + * + * - the master/host side Linux-USB kernel driver API; + * - the "usbfs" user space API; and + * - (eventually) a Linux "gadget" slave/device side driver API. + * + * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems + * act either as a USB master/host or as a USB slave/device. That means + * the master and slave side APIs will benefit from working well together. + */ + +#ifndef __LINUX_USB_CH9_H +#define __LINUX_USB_CH9_H + +#include <asm/types.h> /* __u8 etc */ + +/*-------------------------------------------------------------------------*/ + +/* CONTROL REQUEST SUPPORT */ + +/* + * USB directions + * + * This bit flag is used in endpoint descriptors' bEndpointAddress field. + * It's also one of three fields in control requests bRequestType. + */ +#define USB_DIR_OUT 0 /* to device */ +#define USB_DIR_IN 0x80 /* to host */ + +/* + * USB types, the second of three bRequestType fields + */ +#define USB_TYPE_MASK (0x03 << 5) +#define USB_TYPE_STANDARD (0x00 << 5) +#define USB_TYPE_CLASS (0x01 << 5) +#define USB_TYPE_VENDOR (0x02 << 5) +#define USB_TYPE_RESERVED (0x03 << 5) + +/* + * USB recipients, the third of three bRequestType fields + */ +#define USB_RECIP_MASK 0x1f +#define USB_RECIP_DEVICE 0x00 +#define USB_RECIP_INTERFACE 0x01 +#define USB_RECIP_ENDPOINT 0x02 +#define USB_RECIP_OTHER 0x03 + +/* + * Standard requests, for the bRequest field of a SETUP packet. + * + * These are qualified by the bRequestType field, so that for example + * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved + * by a GET_STATUS request. + */ +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C + +/* + * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and + * are read as a bit array returned by USB_REQ_GET_STATUS. (So there + * are at most sixteen features of each type.) + */ +#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ +#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ +#define USB_DEVICE_TEST_MODE 2 /* (high speed only) */ +#define USB_DEVICE_B_HNP_ENABLE 3 /* dev may initiate HNP */ +#define USB_DEVICE_A_HNP_SUPPORT 4 /* RH port supports HNP */ +#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* other RH port does */ +#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + +#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ + + +/** + * struct usb_ctrlrequest - SETUP data for a USB device control request + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (le16 byte order) + * @wIndex: matches the USB wIndex field (le16 byte order) + * @wLength: matches the USB wLength field (le16 byte order) + * + * This structure is used to send control requests to a USB device. It matches + * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the + * USB spec for a fuller description of the different fields, and what they are + * used for. + * + * Note that the driver for any interface can issue control requests. + * For most devices, interfaces don't coordinate with each other, so + * such requests may be made at any time. + */ +struct usb_ctrlrequest { + __u8 bRequestType; + __u8 bRequest; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or + * (rarely) accepted by SET_DESCRIPTOR. + * + * Note that all multi-byte values here are encoded in little endian + * byte order "on the wire". But when exposed through Linux-USB APIs, + * they've been converted to cpu byte order. + */ + +/* + * Descriptor types ... USB 2.0 spec table 9.5 + */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 +#define USB_DT_DEVICE_QUALIFIER 0x06 +#define USB_DT_OTHER_SPEED_CONFIG 0x07 +#define USB_DT_INTERFACE_POWER 0x08 +/* these are from a minor usb 2.0 revision (ECN) */ +#define USB_DT_OTG 0x09 +#define USB_DT_DEBUG 0x0a +#define USB_DT_INTERFACE_ASSOCIATION 0x0b + +/* conventional codes for class-specific descriptors */ +#define USB_DT_CS_DEVICE 0x21 +#define USB_DT_CS_CONFIG 0x22 +#define USB_DT_CS_STRING 0x23 +#define USB_DT_CS_INTERFACE 0x24 +#define USB_DT_CS_ENDPOINT 0x25 + +/* All standard descriptors have these 2 fields at the beginning */ +struct usb_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE: Device descriptor */ +struct usb_device_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + __u8 iManufacturer; + __u8 iProduct; + __u8 iSerialNumber; + __u8 bNumConfigurations; +} __attribute__ ((packed)); + +#define USB_DT_DEVICE_SIZE 18 + + +/* + * Device and/or Interface Class codes + * as found in bDeviceClass or bInterfaceClass + * and defined by www.usb.org documents + */ +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_AUDIO 1 +#define USB_CLASS_COMM 2 +#define USB_CLASS_HID 3 +#define USB_CLASS_PHYSICAL 5 +#define USB_CLASS_STILL_IMAGE 6 +#define USB_CLASS_PRINTER 7 +#define USB_CLASS_MASS_STORAGE 8 +#define USB_CLASS_HUB 9 +#define USB_CLASS_CDC_DATA 0x0a +#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ +#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ +#define USB_CLASS_VIDEO 0x0e +#define USB_CLASS_APP_SPEC 0xfe +#define USB_CLASS_VENDOR_SPEC 0xff + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_CONFIG: Configuration descriptor information. + * + * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the + * descriptor type is different. Highspeed-capable devices can look + * different depending on what speed they're currently running. Only + * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG + * descriptors. + */ +struct usb_config_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumInterfaces; + __u8 bConfigurationValue; + __u8 iConfiguration; + __u8 bmAttributes; + __u8 bMaxPower; +} __attribute__ ((packed)); + +#define USB_DT_CONFIG_SIZE 9 + +/* from config descriptor bmAttributes */ +#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ +#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ +#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_STRING: String descriptor */ +struct usb_string_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wData[1]; /* UTF-16LE encoded */ +} __attribute__ ((packed)); + +/* note that "string" zero is special, it holds language codes that + * the device supports, not Unicode characters. + */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE: Interface descriptor */ +struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; +} __attribute__ ((packed)); + +#define USB_DT_INTERFACE_SIZE 9 + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENDPOINT: Endpoint descriptor */ +struct usb_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; + + // NOTE: these two are _only_ in audio endpoints. + // use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. + __u8 bRefresh; + __u8 bSynchAddress; +} __attribute__ ((packed)); + +#define USB_DT_ENDPOINT_SIZE 7 +#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ + + +/* + * Endpoints + */ +#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ +#define USB_ENDPOINT_DIR_MASK 0x80 + +#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ +#define USB_ENDPOINT_XFER_CONTROL 0 +#define USB_ENDPOINT_XFER_ISOC 1 +#define USB_ENDPOINT_XFER_BULK 2 +#define USB_ENDPOINT_XFER_INT 3 + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ +struct usb_qualifier_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u8 bNumConfigurations; + __u8 bRESERVED; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_OTG (from OTG 1.0a supplement) */ +struct usb_otg_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP, etc */ +} __attribute__ ((packed)); + +/* from usb_otg_descriptor.bmAttributes */ +#define USB_OTG_SRP (1 << 0) +#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ +struct usb_debug_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + /* bulk endpoints with 8 byte maxpacket */ + __u8 bDebugInEndpoint; + __u8 bDebugOutEndpoint; +}; + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ +struct usb_interface_assoc_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bFirstInterface; + __u8 bInterfaceCount; + __u8 bFunctionClass; + __u8 bFunctionSubClass; + __u8 bFunctionProtocol; + __u8 iFunction; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB 2.0 defines three speeds, here's how Linux identifies them */ + +enum usb_device_speed { + USB_SPEED_UNKNOWN = 0, /* enumerating */ + USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ + USB_SPEED_HIGH /* usb 2.0 */ +}; + +enum usb_device_state { + /* NOTATTACHED isn't in the USB spec, and this state acts + * the same as ATTACHED ... but it's clearer this way. + */ + USB_STATE_NOTATTACHED = 0, + + /* the chapter 9 device states */ + USB_STATE_ATTACHED, + USB_STATE_POWERED, + USB_STATE_DEFAULT, /* limited function */ + USB_STATE_ADDRESS, + USB_STATE_CONFIGURED, /* most functions */ + + USB_STATE_SUSPENDED + + /* NOTE: there are actually four different SUSPENDED + * states, returning to POWERED, DEFAULT, ADDRESS, or + * CONFIGURED respectively when SOF tokens flow again. + */ +}; + +#endif /* __LINUX_USB_CH9_H */ |