diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/nl80211.h | 34 | ||||
| -rw-r--r-- | include/linux/rfkill-regulator.h | 48 |
2 files changed, 78 insertions, 4 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 1832c27c520..216b1d8a862 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -410,6 +410,16 @@ * notification. This event is used to indicate that an unprotected * disassociation frame was dropped when MFP is in use. * + * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a + * beacon or probe response from a compatible mesh peer. This is only + * sent while no station information (sta_info) exists for the new peer + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On + * reception of this notification, userspace may decide to create a new + * station (@NL80211_CMD_NEW_STATION). To stop this notification from + * reoccurring, the userspace authentication daemon may want to create the + * new station with the AUTHENTICATED flag unset and maybe change it later + * depending on the authentication result. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -522,6 +532,8 @@ enum nl80211_commands { NL80211_CMD_UNPROT_DEAUTHENTICATE, NL80211_CMD_UNPROT_DISASSOCIATE, + NL80211_CMD_NEW_PEER_CANDIDATE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -545,6 +557,7 @@ enum nl80211_commands { /* source-level API compatibility */ #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG +#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE /** * enum nl80211_attrs - nl80211 netlink attributes @@ -886,6 +899,9 @@ enum nl80211_commands { * changed once the mesh is active. * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute * containing attributes from &enum nl80211_meshconf_params. + * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver + * allows auth frames in a mesh to be passed to userspace for processing via + * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -1074,6 +1090,8 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, + NL80211_ATTR_SUPPORT_MESH_AUTH, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1168,6 +1186,7 @@ enum nl80211_iftype { * with short barker preamble * @NL80211_STA_FLAG_WME: station is WME/QoS capable * @NL80211_STA_FLAG_MFP: station uses management frame protection + * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1177,6 +1196,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_SHORT_PREAMBLE, NL80211_STA_FLAG_WME, NL80211_STA_FLAG_MFP, + NL80211_STA_FLAG_AUTHENTICATED, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -1277,6 +1297,7 @@ enum nl80211_sta_bss_param { * attribute, like NL80211_STA_INFO_TX_BITRATE. * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute * containing info as possible, see &enum nl80211_sta_bss_param + * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1297,6 +1318,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_SIGNAL_AVG, NL80211_STA_INFO_RX_BITRATE, NL80211_STA_INFO_BSS_PARAM, + NL80211_STA_INFO_CONNECTED_TIME, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1719,9 +1741,12 @@ enum nl80211_meshconf_params { * vendor specific path metric or disable it to use the default Airtime * metric. * - * @NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE: A vendor specific information - * element that vendors will use to identify the path selection methods and - * metrics in use. + * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a + * robust security network ie, or a vendor specific information element that + * vendors will use to identify the path selection methods and metrics in use. + * + * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication + * daemon will be authenticating mesh candidates. * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use @@ -1730,7 +1755,8 @@ enum nl80211_mesh_setup_params { __NL80211_MESH_SETUP_INVALID, NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, - NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE, + NL80211_MESH_SETUP_IE, + NL80211_MESH_SETUP_USERSPACE_AUTH, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, diff --git a/include/linux/rfkill-regulator.h b/include/linux/rfkill-regulator.h new file mode 100644 index 00000000000..aca36bc8331 --- /dev/null +++ b/include/linux/rfkill-regulator.h @@ -0,0 +1,48 @@ +/* + * rfkill-regulator.c - Regulator consumer driver for rfkill + * + * Copyright (C) 2009 Guiming Zhuo <gmzhuo@gmail.com> + * Copyright (C) 2011 Antonio Ospite <ospite@studenti.unina.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_RFKILL_REGULATOR_H +#define __LINUX_RFKILL_REGULATOR_H + +/* + * Use "vrfkill" as supply id when declaring the regulator consumer: + * + * static struct regulator_consumer_supply pcap_regulator_V6_consumers [] = { + * { .dev_name = "rfkill-regulator.0", .supply = "vrfkill" }, + * }; + * + * If you have several regulator driven rfkill, you can append a numerical id to + * .dev_name as done above, and use the same id when declaring the platform + * device: + * + * static struct rfkill_regulator_platform_data ezx_rfkill_bt_data = { + * .name = "ezx-bluetooth", + * .type = RFKILL_TYPE_BLUETOOTH, + * }; + * + * static struct platform_device a910_rfkill = { + * .name = "rfkill-regulator", + * .id = 0, + * .dev = { + * .platform_data = &ezx_rfkill_bt_data, + * }, + * }; + */ + +#include <linux/rfkill.h> + +struct rfkill_regulator_platform_data { + char *name; /* the name for the rfkill switch */ + enum rfkill_type type; /* the type as specified in rfkill.h */ +}; + +#endif /* __LINUX_RFKILL_REGULATOR_H */ |