summaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/bio.h10
-rw-r--r--include/linux/blkdev.h3
-rw-r--r--include/linux/ceph/osd_client.h8
-rw-r--r--include/linux/clocksource.h12
-rw-r--r--include/linux/compat.h9
-rw-r--r--include/linux/dcache.h3
-rw-r--r--include/linux/devfreq.h2
-rw-r--r--include/linux/device.h7
-rw-r--r--include/linux/dma_remapping.h2
-rw-r--r--include/linux/fs.h4
-rw-r--r--include/linux/ftrace_event.h2
-rw-r--r--include/linux/genhd.h4
-rw-r--r--include/linux/hugetlb.h5
-rw-r--r--include/linux/hwspinlock.h1
-rw-r--r--include/linux/i2c.h3
-rw-r--r--include/linux/inet_diag.h3
-rw-r--r--include/linux/init_task.h5
-rw-r--r--include/linux/kvm.h2
-rw-r--r--include/linux/lglock.h36
-rw-r--r--include/linux/log2.h1
-rw-r--r--include/linux/mfd/tps65910.h3
-rw-r--r--include/linux/mfd/wm8994/registers.h15
-rw-r--r--include/linux/mm.h1
-rw-r--r--include/linux/mmc/card.h6
-rw-r--r--include/linux/netdevice.h2
-rw-r--r--include/linux/nfs_fs.h3
-rw-r--r--include/linux/nfs_xdr.h1
-rw-r--r--include/linux/pci-ats.h6
-rw-r--r--include/linux/pci.h2
-rw-r--r--include/linux/pci_ids.h6
-rw-r--r--include/linux/perf_event.h1
-rw-r--r--include/linux/pinctrl/pinctrl.h1
-rw-r--r--include/linux/pkt_sched.h6
-rw-r--r--include/linux/pm.h231
-rw-r--r--include/linux/pm_runtime.h6
-rw-r--r--include/linux/pstore.h4
-rw-r--r--include/linux/sched.h1
-rw-r--r--include/linux/security.h2
-rw-r--r--include/linux/serial.h14
-rw-r--r--include/linux/serial_sci.h1
-rw-r--r--include/linux/sh_clk.h4
-rw-r--r--include/linux/sh_pfc.h76
-rw-r--r--include/linux/shrinker.h2
-rw-r--r--include/linux/sigma.h13
-rw-r--r--include/linux/virtio_config.h2
-rw-r--r--include/linux/virtio_mmio.h2
-rw-r--r--include/linux/vmalloc.h2
47 files changed, 367 insertions, 168 deletions
diff --git a/include/linux/bio.h b/include/linux/bio.h
index a3c071c9e18..847994aef0e 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -211,8 +211,8 @@ extern void bio_pair_release(struct bio_pair *dbio);
extern struct bio_set *bioset_create(unsigned int, unsigned int);
extern void bioset_free(struct bio_set *);
-extern struct bio *bio_alloc(gfp_t, int);
-extern struct bio *bio_kmalloc(gfp_t, int);
+extern struct bio *bio_alloc(gfp_t, unsigned int);
+extern struct bio *bio_kmalloc(gfp_t, unsigned int);
extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
extern void bio_put(struct bio *);
extern void bio_free(struct bio *, struct bio_set *);
@@ -519,7 +519,11 @@ extern void bio_integrity_init(void);
#define bioset_integrity_create(a, b) (0)
#define bio_integrity_prep(a) (0)
#define bio_integrity_enabled(a) (0)
-#define bio_integrity_clone(a, b, c, d) (0)
+static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+ gfp_t gfp_mask, struct bio_set *bs)
+{
+ return 0;
+}
#define bioset_integrity_free(a) do { } while (0)
#define bio_integrity_free(a, b) do { } while (0)
#define bio_integrity_endio(a, b) do { } while (0)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index c7a6d3b5bc7..94acd8172b5 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -805,9 +805,6 @@ extern void blk_unprep_request(struct request *);
*/
extern struct request_queue *blk_init_queue_node(request_fn_proc *rfn,
spinlock_t *lock, int node_id);
-extern struct request_queue *blk_init_allocated_queue_node(struct request_queue *,
- request_fn_proc *,
- spinlock_t *, int node_id);
extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *);
extern struct request_queue *blk_init_allocated_queue(struct request_queue *,
request_fn_proc *, spinlock_t *);
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
index f88eacb111d..7c05ac202d9 100644
--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -10,6 +10,12 @@
#include "osdmap.h"
#include "messenger.h"
+/*
+ * Maximum object name size
+ * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100)
+ */
+#define MAX_OBJ_NAME_SIZE 100
+
struct ceph_msg;
struct ceph_snap_context;
struct ceph_osd_request;
@@ -75,7 +81,7 @@ struct ceph_osd_request {
struct inode *r_inode; /* for use by callbacks */
void *r_priv; /* ditto */
- char r_oid[40]; /* object name */
+ char r_oid[MAX_OBJ_NAME_SIZE]; /* object name */
int r_oid_len;
unsigned long r_stamp; /* send OR check time */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 139c4db55f1..081147da056 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -71,7 +71,7 @@ struct timecounter {
/**
* cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
- * @tc: Pointer to cycle counter.
+ * @cc: Pointer to cycle counter.
* @cycles: Cycles
*
* XXX - This could use some mult_lxl_ll() asm optimization. Same code
@@ -114,7 +114,7 @@ extern u64 timecounter_read(struct timecounter *tc);
* time base as values returned by
* timecounter_read()
* @tc: Pointer to time counter.
- * @cycle: a value returned by tc->cc->read()
+ * @cycle_tstamp: a value returned by tc->cc->read()
*
* Cycle counts that are converted correctly as long as they
* fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
@@ -156,10 +156,12 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
+ * @maxadj: maximum adjustment value to mult (~11%)
* @flags: flags describing special properties
* @archdata: arch-specific data
* @suspend: suspend function for the clocksource, if necessary
* @resume: resume function for the clocksource, if necessary
+ * @cycle_last: most recent cycle counter value seen by ::read()
*/
struct clocksource {
/*
@@ -172,7 +174,7 @@ struct clocksource {
u32 mult;
u32 shift;
u64 max_idle_ns;
-
+ u32 maxadj;
#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
struct arch_clocksource_data archdata;
#endif
@@ -186,6 +188,7 @@ struct clocksource {
void (*suspend)(struct clocksource *cs);
void (*resume)(struct clocksource *cs);
+ /* private: */
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
/* Watchdog related data, used by the framework */
struct list_head wd_list;
@@ -260,6 +263,9 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
/**
* clocksource_cyc2ns - converts clocksource cycles to nanoseconds
+ * @cycles: cycles
+ * @mult: cycle to nanosecond multiplier
+ * @shift: cycle to nanosecond divisor (power of two)
*
* Converts cycles to nanoseconds, using the given mult and shift.
*
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 154bf568301..66ed067fb72 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -552,5 +552,14 @@ extern ssize_t compat_rw_copy_check_uvector(int type,
extern void __user *compat_alloc_user_space(unsigned long len);
+asmlinkage ssize_t compat_sys_process_vm_readv(compat_pid_t pid,
+ const struct compat_iovec __user *lvec,
+ unsigned long liovcnt, const struct compat_iovec __user *rvec,
+ unsigned long riovcnt, unsigned long flags);
+asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid,
+ const struct compat_iovec __user *lvec,
+ unsigned long liovcnt, const struct compat_iovec __user *rvec,
+ unsigned long riovcnt, unsigned long flags);
+
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 4df92619936..ed9f74f6c51 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -339,7 +339,8 @@ extern int d_validate(struct dentry *, struct dentry *);
*/
extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...);
-extern char *__d_path(const struct path *path, struct path *root, char *, int);
+extern char *__d_path(const struct path *, const struct path *, char *, int);
+extern char *d_absolute_path(const struct path *, char *, int);
extern char *d_path(const struct path *, char *, int);
extern char *d_path_with_unreachable(const struct path *, char *, int);
extern char *dentry_path_raw(struct dentry *, char *, int);
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index afb94583960..98ce8124b1c 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -41,7 +41,7 @@ struct devfreq_dev_status {
unsigned long total_time;
unsigned long busy_time;
unsigned long current_frequency;
- void *private_date;
+ void *private_data;
};
/**
diff --git a/include/linux/device.h b/include/linux/device.h
index acf505e4fe9..96acef8dd91 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -71,7 +71,7 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
* @resume: Called to bring a device on this bus out of sleep mode.
* @pm: Power management operations of this bus, callback the specific
* device driver's pm-ops.
- * @iommu_ops IOMMU specific operations for this bus, used to attach IOMMU
+ * @iommu_ops: IOMMU specific operations for this bus, used to attach IOMMU
* driver implementations to a bus and allow the driver to do
* bus-specific setup
* @p: The private data of the driver core, only the driver core can
@@ -755,6 +755,11 @@ static inline bool device_async_suspend_enabled(struct device *dev)
return !!dev->power.async_suspend;
}
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+ dev->power.ignore_children = enable;
+}
+
static inline void device_lock(struct device *dev)
{
mutex_lock(&dev->mutex);
diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h
index ef90cbd8e17..57c9a8ae4f2 100644
--- a/include/linux/dma_remapping.h
+++ b/include/linux/dma_remapping.h
@@ -31,6 +31,7 @@ extern void free_dmar_iommu(struct intel_iommu *iommu);
extern int iommu_calculate_agaw(struct intel_iommu *iommu);
extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu);
extern int dmar_disabled;
+extern int intel_iommu_enabled;
#else
static inline int iommu_calculate_agaw(struct intel_iommu *iommu)
{
@@ -44,6 +45,7 @@ static inline void free_dmar_iommu(struct intel_iommu *iommu)
{
}
#define dmar_disabled (1)
+#define intel_iommu_enabled (0)
#endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0c4df261af7..e0bc4ffb8e7 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -393,8 +393,8 @@ struct inodes_stat_t {
#include <linux/semaphore.h>
#include <linux/fiemap.h>
#include <linux/rculist_bl.h>
-#include <linux/shrinker.h>
#include <linux/atomic.h>
+#include <linux/shrinker.h>
#include <asm/byteorder.h>
@@ -1886,6 +1886,7 @@ extern struct dentry *mount_single(struct file_system_type *fs_type,
extern struct dentry *mount_nodev(struct file_system_type *fs_type,
int flags, void *data,
int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path);
void generic_shutdown_super(struct super_block *sb);
void kill_block_super(struct super_block *sb);
void kill_anon_super(struct super_block *sb);
@@ -1941,6 +1942,7 @@ extern int fd_statfs(int, struct kstatfs *);
extern int statfs_by_dentry(struct dentry *, struct kstatfs *);
extern int freeze_super(struct super_block *super);
extern int thaw_super(struct super_block *super);
+extern bool our_mnt(struct vfsmount *mnt);
extern int current_umask(void);
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 96efa6794ea..c3da42dd22b 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -172,6 +172,7 @@ enum {
TRACE_EVENT_FL_FILTERED_BIT,
TRACE_EVENT_FL_RECORDED_CMD_BIT,
TRACE_EVENT_FL_CAP_ANY_BIT,
+ TRACE_EVENT_FL_NO_SET_FILTER_BIT,
};
enum {
@@ -179,6 +180,7 @@ enum {
TRACE_EVENT_FL_FILTERED = (1 << TRACE_EVENT_FL_FILTERED_BIT),
TRACE_EVENT_FL_RECORDED_CMD = (1 << TRACE_EVENT_FL_RECORDED_CMD_BIT),
TRACE_EVENT_FL_CAP_ANY = (1 << TRACE_EVENT_FL_CAP_ANY_BIT),
+ TRACE_EVENT_FL_NO_SET_FILTER = (1 << TRACE_EVENT_FL_NO_SET_FILTER_BIT),
};
struct ftrace_event_call {
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 9de31bc98c8..6d18f3531f1 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -21,8 +21,6 @@
#define dev_to_part(device) container_of((device), struct hd_struct, __dev)
#define disk_to_dev(disk) (&(disk)->part0.__dev)
#define part_to_dev(part) (&((part)->__dev))
-#define alias_name(disk) ((disk)->alias ? (disk)->alias : \
- (disk)->disk_name)
extern struct device_type part_type;
extern struct kobject *block_depr;
@@ -60,7 +58,6 @@ enum {
#define DISK_MAX_PARTS 256
#define DISK_NAME_LEN 32
-#define ALIAS_LEN 256
#include <linux/major.h>
#include <linux/device.h>
@@ -166,7 +163,6 @@ struct gendisk {
* disks that can't be partitioned. */
char disk_name[DISK_NAME_LEN]; /* name of major driver */
- char *alias; /* alias name of disk */
char *(*devnode)(struct gendisk *gd, mode_t *mode);
unsigned int events; /* supported events */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 19644e0016b..d9d6c868b86 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -110,11 +110,6 @@ static inline void copy_huge_page(struct page *dst, struct page *src)
#define hugetlb_change_protection(vma, address, end, newprot)
-#ifndef HPAGE_MASK
-#define HPAGE_MASK PAGE_MASK /* Keep the compiler happy */
-#define HPAGE_SIZE PAGE_SIZE
-#endif
-
#endif /* !CONFIG_HUGETLB_PAGE */
#define HUGETLB_ANON_FILE "anon_hugepage"
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
index 08a2fee4065..aad6bd4b3ef 100644
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -118,7 +118,6 @@ int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
static inline
void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
{
- return 0;
}
static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 7e92854fe9c..8e25a9167f1 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -432,9 +432,6 @@ void i2c_unlock_adapter(struct i2c_adapter *);
/* Internal numbers to terminate lists */
#define I2C_CLIENT_END 0xfffeU
-/* The numbers to use to set I2C bus address */
-#define ANY_I2C_BUS 0xffff
-
/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
#define I2C_ADDRS(addr, addrs...) \
((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index 80b480c9753..abf5028db98 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -98,9 +98,10 @@ enum {
INET_DIAG_VEGASINFO,
INET_DIAG_CONG,
INET_DIAG_TOS,
+ INET_DIAG_TCLASS,
};
-#define INET_DIAG_MAX INET_DIAG_TOS
+#define INET_DIAG_MAX INET_DIAG_TCLASS
/* INET_DIAG_MEM */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 08ffab01e76..32574eef939 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -126,6 +126,8 @@ extern struct cred init_cred;
# define INIT_PERF_EVENTS(tsk)
#endif
+#define INIT_TASK_COMM "swapper"
+
/*
* INIT_TASK is used to set up the first task table, touch at
* your own risk!. Base=0, limit=0x1fffff (=2MB)
@@ -162,7 +164,7 @@ extern struct cred init_cred;
.group_leader = &tsk, \
RCU_INIT_POINTER(.real_cred, &init_cred), \
RCU_INIT_POINTER(.cred, &init_cred), \
- .comm = "swapper", \
+ .comm = INIT_TASK_COMM, \
.thread = INIT_THREAD, \
.fs = &init_fs, \
.files = &init_files, \
@@ -184,7 +186,6 @@ extern struct cred init_cred;
[PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \
}, \
.thread_group = LIST_HEAD_INIT(tsk.thread_group), \
- .dirties = INIT_PROP_LOCAL_SINGLE(dirties), \
INIT_IDS \
INIT_PERF_EVENTS(tsk) \
INIT_TRACE_IRQFLAGS \
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index f47fcd30273..68e67e50d02 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -555,9 +555,9 @@ struct kvm_ppc_pvinfo {
#define KVM_CAP_PPC_SMT 64
#define KVM_CAP_PPC_RMA 65
#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */
-#define KVM_CAP_PPC_HIOR 67
#define KVM_CAP_PPC_PAPR 68
#define KVM_CAP_S390_GMAP 71
+#define KVM_CAP_TSC_DEADLINE_TIMER 72
#ifdef KVM_CAP_IRQ_ROUTING
diff --git a/include/linux/lglock.h b/include/linux/lglock.h
index f549056fb20..87f402ccec5 100644
--- a/include/linux/lglock.h
+++ b/include/linux/lglock.h
@@ -22,6 +22,7 @@
#include <linux/spinlock.h>
#include <linux/lockdep.h>
#include <linux/percpu.h>
+#include <linux/cpu.h>
/* can make br locks by using local lock for read side, global lock for write */
#define br_lock_init(name) name##_lock_init()
@@ -72,9 +73,31 @@
#define DEFINE_LGLOCK(name) \
\
+ DEFINE_SPINLOCK(name##_cpu_lock); \
+ cpumask_t name##_cpus __read_mostly; \
DEFINE_PER_CPU(arch_spinlock_t, name##_lock); \
DEFINE_LGLOCK_LOCKDEP(name); \
\
+ static int \
+ name##_lg_cpu_callback(struct notifier_block *nb, \
+ unsigned long action, void *hcpu) \
+ { \
+ switch (action & ~CPU_TASKS_FROZEN) { \
+ case CPU_UP_PREPARE: \
+ spin_lock(&name##_cpu_lock); \
+ cpu_set((unsigned long)hcpu, name##_cpus); \
+ spin_unlock(&name##_cpu_lock); \
+ break; \
+ case CPU_UP_CANCELED: case CPU_DEAD: \
+ spin_lock(&name##_cpu_lock); \
+ cpu_clear((unsigned long)hcpu, name##_cpus); \
+ spin_unlock(&name##_cpu_lock); \
+ } \
+ return NOTIFY_OK; \
+ } \
+ static struct notifier_block name##_lg_cpu_notifier = { \
+ .notifier_call = name##_lg_cpu_callback, \
+ }; \
void name##_lock_init(void) { \
int i; \
LOCKDEP_INIT_MAP(&name##_lock_dep_map, #name, &name##_lock_key, 0); \
@@ -83,6 +106,11 @@
lock = &per_cpu(name##_lock, i); \
*lock = (arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED; \
} \
+ register_hotcpu_notifier(&name##_lg_cpu_notifier); \
+ get_online_cpus(); \
+ for_each_online_cpu(i) \
+ cpu_set(i, name##_cpus); \
+ put_online_cpus(); \
} \
EXPORT_SYMBOL(name##_lock_init); \
\
@@ -124,9 +152,9 @@
\
void name##_global_lock_online(void) { \
int i; \
- preempt_disable(); \
+ spin_lock(&name##_cpu_lock); \
rwlock_acquire(&name##_lock_dep_map, 0, 0, _RET_IP_); \
- for_each_online_cpu(i) { \
+ for_each_cpu(i, &name##_cpus) { \
arch_spinlock_t *lock; \
lock = &per_cpu(name##_lock, i); \
arch_spin_lock(lock); \
@@ -137,12 +165,12 @@
void name##_global_unlock_online(void) { \
int i; \
rwlock_release(&name##_lock_dep_map, 1, _RET_IP_); \
- for_each_online_cpu(i) { \
+ for_each_cpu(i, &name##_cpus) { \
arch_spinlock_t *lock; \
lock = &per_cpu(name##_lock, i); \
arch_spin_unlock(lock); \
} \
- preempt_enable(); \
+ spin_unlock(&name##_cpu_lock); \
} \
EXPORT_SYMBOL(name##_global_unlock_online); \
\
diff --git a/include/linux/log2.h b/include/linux/log2.h
index 25b808631cd..fd7ff3d91e6 100644
--- a/include/linux/log2.h
+++ b/include/linux/log2.h
@@ -185,7 +185,6 @@ unsigned long __rounddown_pow_of_two(unsigned long n)
#define rounddown_pow_of_two(n) \
( \
__builtin_constant_p(n) ? ( \
- (n == 1) ? 0 : \
(1UL << ilog2(n))) : \
__rounddown_pow_of_two(n) \
)
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 82b4c8801a4..8bf2cb9502d 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -243,7 +243,8 @@
/*Registers VDD1, VDD2 voltage values definitions */
-#define VDD1_2_NUM_VOLTS 73
+#define VDD1_2_NUM_VOLT_FINE 73
+#define VDD1_2_NUM_VOLT_COARSE 3
#define VDD1_2_MIN_VOLT 6000
#define VDD1_2_OFFSET 125
diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h
index fae295048a8..83a9caec0e4 100644
--- a/include/linux/mfd/wm8994/registers.h
+++ b/include/linux/mfd/wm8994/registers.h
@@ -1963,6 +1963,21 @@
#define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */
/*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */
+#define WM8958_MICD_STS 0x0001 /* MICD_STS */
+#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */
+
+/*
* R76 (0x4C) - Charge Pump (1)
*/
#define WM8994_CP_ENA 0x8000 /* CP_ENA */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 3dc3a8c2c48..4baadd18f4a 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -10,6 +10,7 @@
#include <linux/mmzone.h>
#include <linux/rbtree.h>
#include <linux/prio_tree.h>
+#include <linux/atomic.h>
#include <linux/debug_locks.h>
#include <linux/mm_types.h>
#include <linux/range.h>
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 415f2db414e..c8ef9bc54d5 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -218,6 +218,7 @@ struct mmc_card {
#define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */
#define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */
#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */
+#define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */
/* byte mode */
unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */
#define MMC_NO_POWER_NOTIFICATION 0
@@ -433,6 +434,11 @@ static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c)
return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512;
}
+static inline int mmc_card_long_read_time(const struct mmc_card *c)
+{
+ return c->quirks & MMC_QUIRK_LONG_READ_TIME;
+}
+
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) (dev_name(&(c)->dev))
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index cbeb5867cff..a82ad4dd306 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2536,6 +2536,8 @@ extern void net_disable_timestamp(void);
extern void *dev_seq_start(struct seq_file *seq, loff_t *pos);
extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos);
extern void dev_seq_stop(struct seq_file *seq, void *v);
+extern int dev_seq_open_ops(struct inode *inode, struct file *file,
+ const struct seq_operations *ops);
#endif
extern int netdev_class_create_file(struct class_attribute *class_attr);
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index ab2c6343361..92ecf5585fa 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -410,6 +410,9 @@ extern const struct inode_operations nfs_file_inode_operations;
extern const struct inode_operations nfs3_file_inode_operations;
#endif /* CONFIG_NFS_V3 */
extern const struct file_operations nfs_file_operations;
+#ifdef CONFIG_NFS_V4
+extern const struct file_operations nfs4_file_operations;
+#endif /* CONFIG_NFS_V4 */
extern const struct address_space_operations nfs_file_aops;
extern const struct address_space_operations nfs_dir_aops;
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index c74595ba709..2a7c533be5d 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1192,6 +1192,7 @@ struct nfs_rpc_ops {
const struct dentry_operations *dentry_ops;
const struct inode_operations *dir_inode_ops;
const struct inode_operations *file_inode_ops;
+ const struct file_operations *file_ops;
int (*getroot) (struct nfs_server *, struct nfs_fh *,
struct nfs_fsinfo *);
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index e3d0b389024..7ef68724f0f 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -12,7 +12,7 @@ struct pci_ats {
unsigned int is_enabled:1; /* Enable bit is set */
};
-#ifdef CONFIG_PCI_IOV
+#ifdef CONFIG_PCI_ATS
extern int pci_enable_ats(struct pci_dev *dev, int ps);
extern void pci_disable_ats(struct pci_dev *dev);
@@ -29,7 +29,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev)
return dev->ats && dev->ats->is_enabled;
}
-#else /* CONFIG_PCI_IOV */
+#else /* CONFIG_PCI_ATS */
static inline int pci_enable_ats(struct pci_dev *dev, int ps)
{
@@ -50,7 +50,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev)
return 0;
}
-#endif /* CONFIG_PCI_IOV */
+#endif /* CONFIG_PCI_ATS */
#ifdef CONFIG_PCI_PRI
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 337df0d5d5f..7cda65b5f79 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -338,7 +338,7 @@ struct pci_dev {
struct list_head msi_list;
#endif
struct pci_vpd *vpd;
-#ifdef CONFIG_PCI_IOV
+#ifdef CONFIG_PCI_ATS
union {
struct pci_sriov *sriov; /* SR-IOV capability related */
struct pci_dev *physfn; /* the PF this VF is associated with */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3fdf251389d..2aaee0ca9da 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -517,8 +517,12 @@
#define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302
#define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303
#define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304
+#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600
+#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
+#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
#define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603
#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604
+#define PCI_DEVICE_ID_AMD_15H_NB_F5 0x1605
#define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703
#define PCI_DEVICE_ID_AMD_LANCE 0x2000
#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
@@ -2405,6 +2409,8 @@
#define PCI_VENDOR_ID_AZWAVE 0x1a3b
+#define PCI_VENDOR_ID_ASMEDIA 0x1b21
+
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 1e9ebe5e009..b1f89122bf6 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -822,6 +822,7 @@ struct perf_event {
int mmap_locked;
struct user_struct *mmap_user;
struct ring_buffer *rb;
+ struct list_head rb_entry;
/* poll related */
wait_queue_head_t waitq;
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 3605e947fa9..04c011038f3 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -121,6 +121,7 @@ extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
#else
+struct pinctrl_dev;
/* Sufficiently stupid default function when pinctrl is not in use */
static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index c5336705921..7281d5acf2f 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -30,7 +30,7 @@
*/
struct tc_stats {
- __u64 bytes; /* NUmber of enqueues bytes */
+ __u64 bytes; /* Number of enqueued bytes */
__u32 packets; /* Number of enqueued packets */
__u32 drops; /* Packets dropped because of lack of resources */
__u32 overlimits; /* Number of throttle events when this
@@ -297,7 +297,7 @@ struct tc_htb_glob {
__u32 debug; /* debug flags */
/* stats */
- __u32 direct_pkts; /* count of non shapped packets */
+ __u32 direct_pkts; /* count of non shaped packets */
};
enum {
TCA_HTB_UNSPEC,
@@ -503,7 +503,7 @@ enum {
};
#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1)
-/* State transition probablities for 4 state model */
+/* State transition probabilities for 4 state model */
struct tc_netem_gimodel {
__u32 p13;
__u32 p31;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index f15acb64681..3f3ed83a9aa 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -54,118 +54,145 @@ typedef struct pm_message {
/**
* struct dev_pm_ops - device PM callbacks
*
- * Several driver power state transitions are externally visible, affecting
+ * Several device power state transitions are externally visible, affecting
* the state of pending I/O queues and (for drivers that touch hardware)
* interrupts, wakeups, DMA, and other hardware state. There may also be
- * internal transitions to various low power modes, which are transparent
+ * internal transitions to various low-power modes which are transparent
* to the rest of the driver stack (such as a driver that's ON gating off
* clocks which are not in active use).
*
- * The externally visible transitions are handled with the help of the following
- * callbacks included in this structure:
- *
- * @prepare: Prepare the device for the upcoming transition, but do NOT change
- * its hardware state. Prevent new children of the device from being
- * registered after @prepare() returns (the driver's subsystem and
- * generally the rest of the kernel is supposed to prevent new calls to the
- * probe method from being made too once @prepare() has succeeded). If
- * @prepare() detects a situation it cannot handle (e.g. registration of a
- * child already in progress), it may return -EAGAIN, so that the PM core
- * can execute it once again (e.g. after the new child has been registered)
- * to recover from the race condition. This method is executed for all
- * kinds of suspend transitions and is followed by one of the suspend
- * callbacks: @suspend(), @freeze(), or @poweroff().
- * The PM core executes @prepare() for all devices before starting to
- * execute suspend callbacks for any of them, so drivers may assume all of
- * the other devices to be present and functional while @prepare() is being
- * executed. In particular, it is safe to make GFP_KERNEL memory
- * allocations from within @prepare(). However, drivers may NOT assume
- * anything about the availability of the user space at that time and it
- * is not correct to request firmware from within @prepare() (it's too
- * late to do that). [To work around this limitation, drivers may
- * register suspend and hibernation notifiers that are executed before the
- * freezing of tasks.]
+ * The externally visible transitions are handled with the help of callbacks
+ * included in this structure in such a way that two levels of callbacks are
+ * involved. First, the PM core executes callbacks provided by PM domains,
+ * device types, classes and bus types. They are the subsystem-level callbacks
+ * supposed to execute callbacks provided by device drivers, although they may
+ * choose not to do that. If the driver callbacks are executed, they have to
+ * collaborate with the subsystem-level callbacks to achieve the goals
+ * appropriate for the given system transition, given transition phase and the
+ * subsystem the device belongs to.
+ *
+ * @prepare: The principal role of this callback is to prevent new children of
+ * the device from being registered after it has returned (the driver's
+ * subsystem and generally the rest of the kernel is supposed to prevent
+ * new calls to the probe method from being made too once @prepare() has
+ * succeeded). If @prepare() detects a situation it cannot handle (e.g.
+ * registration of a child already in progress), it may return -EAGAIN, so
+ * that the PM core can execute it once again (e.g. after a new child has
+ * been registered) to recover from the race condition.
+ * This method is executed for all kinds of suspend transitions and is
+ * followed by one of the suspend callbacks: @suspend(), @freeze(), or
+ * @poweroff(). The PM core executes subsystem-level @prepare() for all
+ * devices before starting to invoke suspend callbacks for any of them, so
+ * generally devices may be assumed to be functional or to respond to
+ * runtime resume requests while @prepare() is being executed. However,
+ * device drivers may NOT assume anything about the availability of user
+ * space at that time and it is NOT valid to request firmware from within
+ * @prepare() (it's too late to do that). It also is NOT valid to allocate
+ * substantial amounts of memory from @prepare() in the GFP_KERNEL mode.
+ * [To work around these limitations, drivers may register suspend and
+ * hibernation notifiers to be executed before the freezing of tasks.]
*
* @complete: Undo the changes made by @prepare(). This method is executed for
* all kinds of resume transitions, following one of the resume callbacks:
* @resume(), @thaw(), @restore(). Also called if the state transition
- * fails before the driver's suspend callback (@suspend(), @freeze(),
- * @poweroff()) can be executed (e.g. if the suspend callback fails for one
+ * fails before the driver's suspend callback: @suspend(), @freeze() or
+ * @poweroff(), can be executed (e.g. if the suspend callback fails for one
* of the other devices that the PM core has unsuccessfully attempted to
* suspend earlier).
- * The PM core executes @complete() after it has executed the appropriate
- * resume callback for all devices.
+ * The PM core executes subsystem-level @complete() after it has executed
+ * the appropriate resume callbacks for all devices.
*
* @suspend: Executed before putting the system into a sleep state in which the
- * contents of main memory are preserved. Quiesce the device, put it into
- * a low power state appropriate for the upcoming system state (such as
- * PCI_D3hot), and enable wakeup events as appropriate.
+ * contents of main memory are preserved. The exact action to perform
+ * depends on the device's subsystem (PM domain, device type, class or bus
+ * type), but generally the device must be quiescent after subsystem-level
+ * @suspend() has returned, so that it doesn't do any I/O or DMA.
+ * Subsystem-level @suspend() is executed for all devices after invoking
+ * subsystem-level @prepare() for all of them.
*
* @resume: Executed after waking the system up from a sleep state in which the
- * contents of main memory were preserved. Put the device into the
- * appropriate state, according to the information saved in memory by the
- * preceding @suspend(). The driver starts working again, responding to
- * hardware events and software requests. The hardware may have gone
- * through a power-off reset, or it may have maintained state from the
- * previous suspend() which the driver may rely on while resuming. On most
- * platforms, there are no restrictions on availability of resources like
- * clocks during @resume().
+ * contents of main memory were preserved. The exact action to perform
+ * depends on the device's subsystem, but generally the driver is expected
+ * to start working again, responding to hardware events and software
+ * requests (the device itself may be left in a low-power state, waiting
+ * for a runtime resume to occur). The state of the device at the time its
+ * driver's @resume() callback is run depends on the platform and subsystem
+ * the device belongs to. On most platforms, there are no restrictions on
+ * availability of resources like clocks during @resume().
+ * Subsystem-level @resume() is executed for all devices after invoking
+ * subsystem-level @resume_noirq() for all of them.
*
* @freeze: Hibernation-specific, executed before creating a hibernation image.
- * Quiesce operations so that a consistent image can be created, but do NOT
- * otherwise put the device into a low power device state and do NOT emit
- * system wakeup events. Save in main memory the device settings to be
- * used by @restore() during the subsequent resume from hibernation or by
- * the subsequent @thaw(), if the creation of the image or the restoration
- * of main memory contents from it fails.
+ * Analogous to @suspend(), but it should not enable the device to signal
+ * wakeup events or change its power state. The majority of subsystems
+ * (with the notable exception of the PCI bus type) expect the driver-level
+ * @freeze() to save the device settings in memory to be used by @restore()
+ * during the subsequent resume from hibernation.
+ * Subsystem-level @freeze() is executed for all devices after invoking
+ * subsystem-level @prepare() for all of them.
*
* @thaw: Hibernation-specific, executed after creating a hibernation image OR
- * if the creation of the image fails. Also executed after a failing
+ * if the creation of an image has failed. Also executed after a failing
* attempt to restore the contents of main memory from such an image.
* Undo the changes made by the preceding @freeze(), so the device can be
* operated in the same way as immediately before the call to @freeze().
+ * Subsystem-level @thaw() is executed for all devices after invoking
+ * subsystem-level @thaw_noirq() for all of them. It also may be executed
+ * directly after @freeze() in case of a transition error.
*
* @poweroff: Hibernation-specific, executed after saving a hibernation image.
- * Quiesce the device, put it into a low power state appropriate for the
- * upcoming system state (such as PCI_D3hot), and enable wakeup events as
- * appropriate.
+ * Analogous to @suspend(), but it need not save the device's settings in
+ * memory.
+ * Subsystem-level @poweroff() is executed for all devices after invoking
+ * subsystem-level @prepare() for all of them.
*
* @restore: Hibernation-specific, executed after restoring the contents of main
- * memory from a hibernation image. Driver starts working again,
- * responding to hardware events and software requests. Drivers may NOT
- * make ANY assumptions about the hardware state right prior to @restore().
- * On most platforms, there are no restrictions on availability of
- * resources like clocks during @restore().
- *
- * @suspend_noirq: Complete the operations of ->suspend() by carrying out any
- * actions required for suspending the device that need interrupts to be
- * disabled
- *
- * @resume_noirq: Prepare for the execution of ->resume() by carrying out any
- * actions required for resuming the device that need interrupts to be
- * disabled
- *
- * @freeze_noirq: Complete the operations of ->freeze() by carrying out any
- * actions required for freezing the device that need interrupts to be
- * disabled
- *
- * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any
- * actions required for thawing the device that need interrupts to be
- * disabled
- *
- * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any
- * actions required for handling the device that need interrupts to be
- * disabled
- *
- * @restore_noirq: Prepare for the execution of ->restore() by carrying out any
- * actions required for restoring the operations of the device that need
- * interrupts to be disabled
+ * memory from a hibernation image, analogous to @resume().
+ *
+ * @suspend_noirq: Complete the actions started by @suspend(). Carry out any
+ * additional operations required for suspending the device that might be
+ * racing with its driver's interrupt handler, which is guaranteed not to
+ * run while @suspend_noirq() is being executed.
+ * It generally is expected that the device will be in a low-power state
+ * (appropriate for the target system sleep state) after subsystem-level
+ * @suspend_noirq() has returned successfully. If the device can generate
+ * system wakeup signals and is enabled to wake up the system, it should be
+ * configured to do so at that time. However, depending on the platform
+ * and device's subsystem, @suspend() may be allowed to put the device into
+ * the low-power state and configure it to generate wakeup signals, in
+ * which case it generally is not necessary to define @suspend_noirq().
+ *
+ * @resume_noirq: Prepare for the execution of @resume() by carrying out any
+ * operations required for resuming the device that might be racing with
+ * its driver's interrupt handler, which is guaranteed not to run while
+ * @resume_noirq() is being executed.
+ *
+ * @freeze_noirq: Complete the actions started by @freeze(). Carry out any
+ * additional operations required for freezing the device that might be
+ * racing with its driver's interrupt handler, which is guaranteed not to
+ * run while @freeze_noirq() is being executed.
+ * The power state of the device should not be changed by either @freeze()
+ * or @freeze_noirq() and it should not be configured to signal system
+ * wakeup by any of these callbacks.
+ *
+ * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
+ * operations required for thawing the device that might be racing with its
+ * driver's interrupt handler, which is guaranteed not to run while
+ * @thaw_noirq() is being executed.
+ *
+ * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to
+ * @suspend_noirq(), but it need not save the device's settings in memory.
+ *
+ * @restore_noirq: Prepare for the execution of @restore() by carrying out any
+ * operations required for thawing the device that might be racing with its
+ * driver's interrupt handler, which is guaranteed not to run while
+ * @restore_noirq() is being executed. Analogous to @resume_noirq().
*
* All of the above callbacks, except for @complete(), return error codes.
* However, the error codes returned by the resume operations, @resume(),
- * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do
+ * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do
* not cause the PM core to abort the resume transition during which they are
- * returned. The error codes returned in that cases are only printed by the PM
+ * returned. The error codes returned in those cases are only printed by the PM
* core to the system logs for debugging purposes. Still, it is recommended
* that drivers only return error codes from their resume methods in case of an
* unrecoverable failure (i.e. when the device being handled refuses to resume
@@ -174,31 +201,43 @@ typedef struct pm_message {
* their children.
*
* It is allowed to unregister devices while the above callbacks are being
- * executed. However, it is not allowed to unregister a device from within any
- * of its own callbacks.
+ * executed. However, a callback routine must NOT try to unregister the device
+ * it was called for, although it may unregister children of that device (for
+ * example, if it detects that a child was unplugged while the system was
+ * asleep).
+ *
+ * Refer to Documentation/power/devices.txt for more information about the role
+ * of the above callbacks in the system suspend process.
*
- * There also are the following callbacks related to run-time power management
- * of devices:
+ * There also are callbacks related to runtime power management of devices.
+ * Again, these callbacks are executed by the PM core only for subsystems
+ * (PM domains, device types, classes and bus types) and the subsystem-level
+ * callbacks are supposed to invoke the driver callbacks. Moreover, the exact
+ * actions to be performed by a device driver's callbacks generally depend on
+ * the platform and subsystem the device belongs to.
*
* @runtime_suspend: Prepare the device for a condition in which it won't be
* able to communicate with the CPU(s) and RAM due to power management.
- * This need not mean that the device should be put into a low power state.
+ * This need not mean that the device should be put into a low-power state.
* For example, if the device is behind a link which is about to be turned
* off, the device may remain at full power. If the device does go to low
- * power and is capable of generating run-time wake-up events, remote
- * wake-up (i.e., a hardware mechanism allowing the device to request a
- * change of its power state via a wake-up event, such as PCI PME) should
- * be enabled for it.
+ * power and is capable of generating runtime wakeup events, remote wakeup
+ * (i.e., a hardware mechanism allowing the device to request a change of
+ * its power state via an interrupt) should be enabled for it.
*
* @runtime_resume: Put the device into the fully active state in response to a
- * wake-up event generated by hardware or at the request of software. If
- * necessary, put the device into the full power state and restore its
+ * wakeup event generated by hardware or at the request of software. If
+ * necessary, put the device into the full-power state and restore its
* registers, so that it is fully operational.
*
- * @runtime_idle: Device appears to be inactive and it might be put into a low
- * power state if all of the necessary conditions are satisfied. Check
+ * @runtime_idle: Device appears to be inactive and it might be put into a
+ * low-power state if all of the necessary conditions are satisfied. Check
* these conditions and handle the device as appropriate, possibly queueing
* a suspend request for it. The return value is ignored by the PM core.
+ *
+ * Refer to Documentation/power/runtime_pm.txt for more information about the
+ * role of the above callbacks in device runtime power management.
+ *
*/
struct dev_pm_ops {
@@ -447,6 +486,7 @@ struct dev_pm_info {
unsigned int async_suspend:1;
bool is_prepared:1; /* Owned by the PM core */
bool is_suspended:1; /* Ditto */
+ bool ignore_children:1;
spinlock_t lock;
#ifdef CONFIG_PM_SLEEP
struct list_head entry;
@@ -464,7 +504,6 @@ struct dev_pm_info {
atomic_t usage_count;
atomic_t child_count;
unsigned int disable_depth:3;
- unsigned int ignore_children:1;
unsigned int idle_notification:1;
unsigned int request_pending:1;
unsigned int deferred_resume:1;
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index d8d90361964..d3085e72a0e 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -52,11 +52,6 @@ static inline bool pm_children_suspended(struct device *dev)
|| !atomic_read(&dev->power.child_count);
}
-static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
-{
- dev->power.ignore_children = enable;
-}
-
static inline void pm_runtime_get_noresume(struct device *dev)
{
atomic_inc(&dev->power.usage_count);
@@ -130,7 +125,6 @@ static inline void pm_runtime_allow(struct device *dev) {}
static inline void pm_runtime_forbid(struct device *dev) {}
static inline bool pm_children_suspended(struct device *dev) { return false; }
-static inline void pm_suspend_ignore_children(struct device *dev, bool en) {}
static inline void pm_runtime_get_noresume(struct device *dev) {}
static inline void pm_runtime_put_noidle(struct device *dev) {}
static inline bool device_run_wake(struct device *dev) { return false; }
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index ea567321ae3..2ca8cde5459 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -35,10 +35,12 @@ struct pstore_info {
spinlock_t buf_lock; /* serialize access to 'buf' */
char *buf;
size_t bufsize;
+ struct mutex read_mutex; /* serialize open/read/close */
int (*open)(struct pstore_info *psi);
int (*close)(struct pstore_info *psi);
ssize_t (*read)(u64 *id, enum pstore_type_id *type,
- struct timespec *time, struct pstore_info *psi);
+ struct timespec *time, char **buf,
+ struct pstore_info *psi);
int (*write)(enum pstore_type_id type, u64 *id,
unsigned int part, size_t size, struct pstore_info *psi);
int (*erase)(enum pstore_type_id type, u64 id,
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 68daf4f27e2..1c4f3e9b9bc 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1521,7 +1521,6 @@ struct task_struct {
#ifdef CONFIG_FAULT_INJECTION
int make_it_fail;
#endif
- struct prop_local_single dirties;
/*
* when (nr_dirtied >= nr_dirtied_pause), it's time to call
* balance_dirty_pages() for some dirty throttling pause
diff --git a/include/linux/security.h b/include/linux/security.h
index 19d8e04e168..e8c619d3929 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -2056,7 +2056,7 @@ static inline int security_old_inode_init_security(struct inode *inode,
char **name, void **value,
size_t *len)
{
- return 0;
+ return -EOPNOTSUPP;
}
static inline int security_inode_create(struct inode *dir,
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 97ff8e27a6c..3d86517fe7d 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -207,13 +207,15 @@ struct serial_icounter_struct {
struct serial_rs485 {
__u32 flags; /* RS485 feature flags */
-#define SER_RS485_ENABLED (1 << 0)
-#define SER_RS485_RTS_ON_SEND (1 << 1)
-#define SER_RS485_RTS_AFTER_SEND (1 << 2)
-#define SER_RS485_RTS_BEFORE_SEND (1 << 3)
+#define SER_RS485_ENABLED (1 << 0) /* If enabled */
+#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for
+ RTS pin when
+ sending */
+#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for
+ RTS pin after sent*/
#define SER_RS485_RX_DURING_TX (1 << 4)
- __u32 delay_rts_before_send; /* Milliseconds */
- __u32 delay_rts_after_send; /* Milliseconds */
+ __u32 delay_rts_before_send; /* Delay before send (milliseconds) */
+ __u32 delay_rts_after_send; /* Delay after send (milliseconds) */
__u32 padding[5]; /* Memory is cheap, new structs
are a royal PITA .. */
};
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 0efa1f10bc2..369273a5267 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -67,6 +67,7 @@ enum {
SCIx_IRDA_REGTYPE,
SCIx_SCIFA_REGTYPE,
SCIx_SCIFB_REGTYPE,
+ SCIx_SH2_SCIF_FIFODATA_REGTYPE,
SCIx_SH3_SCIF_REGTYPE,
SCIx_SH4_SCIF_REGTYPE,
SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 3ccf18648d0..a20831cf336 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -52,7 +52,6 @@ struct clk {
unsigned long arch_flags;
void *priv;
- struct dentry *dentry;
struct clk_mapping *mapping;
struct cpufreq_frequency_table *freq_table;
unsigned int nr_freqs;
@@ -94,6 +93,9 @@ int clk_rate_table_find(struct clk *clk,
long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
unsigned int div_max, unsigned long rate);
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+ unsigned int mult_max, unsigned long rate);
+
long clk_round_parent(struct clk *clk, unsigned long target,
unsigned long *best_freq, unsigned long *parent_freq,
unsigned int div_min, unsigned int div_max);
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index bc8c9208f7e..8446789216e 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -104,4 +104,80 @@ struct pinmux_info {
int register_pinmux(struct pinmux_info *pip);
int unregister_pinmux(struct pinmux_info *pip);
+/* helper macro for port */
+#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define PORT_10(fn, pfx, sfx) \
+ PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx), \
+ PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx), \
+ PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx), \
+ PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx), \
+ PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
+
+#define PORT_90(fn, pfx, sfx) \
+ PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx), \
+ PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx), \
+ PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx), \
+ PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx), \
+ PORT_10(fn, pfx##9, sfx)
+
+#define _PORT_ALL(pfx, sfx) pfx##_##sfx
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define PORT_ALL(str) CPU_ALL_PORT(_PORT_ALL, PORT, str)
+#define GPIO_PORT_ALL() CPU_ALL_PORT(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+/* helper macro for pinmux_enum_t */
+#define PORT_DATA_I(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* helper macro for top 4 bits in PORTnCR */
+#define _PCRH(in, in_pd, in_pu, out) \
+ 0, (out), (in), 0, \
+ 0, 0, 0, 0, \
+ 0, 0, (in_pd), 0, \
+ 0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg) \
+ { \
+ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+ _PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
+ PORT##nr##_IN_PU, PORT##nr##_OUT), \
+ PORT##nr##_FN0, PORT##nr##_FN1, \
+ PORT##nr##_FN2, PORT##nr##_FN3, \
+ PORT##nr##_FN4, PORT##nr##_FN5, \
+ PORT##nr##_FN6, PORT##nr##_FN7 } \
+ }
+
#endif /* __SH_PFC_H */
diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h
index a83833a1f7a..07ceb97d53f 100644
--- a/include/linux/shrinker.h
+++ b/include/linux/shrinker.h
@@ -35,7 +35,7 @@ struct shrinker {
/* These are for internal use */
struct list_head list;
- long nr; /* objs pending delete */
+ atomic_long_t nr_in_batch; /* objs pending delete */
};
#define DEFAULT_SEEKS 2 /* A good number if you don't know better. */
extern void register_shrinker(struct shrinker *);
diff --git a/include/linux/sigma.h b/include/linux/sigma.h
index e2accb3164d..d0de882c0d9 100644
--- a/include/linux/sigma.h
+++ b/include/linux/sigma.h
@@ -24,7 +24,7 @@ struct sigma_firmware {
struct sigma_firmware_header {
unsigned char magic[7];
u8 version;
- u32 crc;
+ __le32 crc;
};
enum {
@@ -40,19 +40,14 @@ enum {
struct sigma_action {
u8 instr;
u8 len_hi;
- u16 len;
- u16 addr;
+ __le16 len;
+ __be16 addr;
unsigned char payload[];
};
static inline u32 sigma_action_len(struct sigma_action *sa)
{
- return (sa->len_hi << 16) | sa->len;
-}
-
-static inline size_t sigma_action_size(struct sigma_action *sa, u32 payload_len)
-{
- return sizeof(*sa) + payload_len + (payload_len % 2);
+ return (sa->len_hi << 16) | le16_to_cpu(sa->len);
}
extern int process_sigma_firmware(struct i2c_client *client, const char *name);
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index add4790b21f..e9e72bda1b7 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -85,6 +85,8 @@
* @reset: reset the device
* vdev: the virtio device
* After this, status and feature negotiation must be done again
+ * Device must not be reset from its vq/config callbacks, or in
+ * parallel with being added/removed.
* @find_vqs: find virtqueues and instantiate them.
* vdev: the virtio_device
* nvqs: the number of virtqueues to find
diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h
index 27c7edefbc8..5c7b6f0daef 100644
--- a/include/linux/virtio_mmio.h
+++ b/include/linux/virtio_mmio.h
@@ -63,7 +63,7 @@
#define VIRTIO_MMIO_GUEST_FEATURES 0x020
/* Activated features set selector - Write Only */
-#define VIRTIO_MMIO_GUEST_FEATURES_SET 0x024
+#define VIRTIO_MMIO_GUEST_FEATURES_SEL 0x024
/* Guest's memory page size in bytes - Write Only */
#define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 687fb11e201..4bde182fcf9 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -119,7 +119,7 @@ unmap_kernel_range(unsigned long addr, unsigned long size)
#endif
/* Allocate/destroy a 'vmalloc' VM area. */
-extern struct vm_struct *alloc_vm_area(size_t size);
+extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes);
extern void free_vm_area(struct vm_struct *area);
/* for /dev/kmem */